1 purpose

Insect-proof and rodent-proof measures are set in the factory area to prevent insects and rodents from invading and polluting products.

2 scope of use

All factory areas.

3 person in charge

Production department, quality control department, administration and personnel department.

4 control measures

4. 1 Plastic soft curtains are set at each entrance of the processing workshop to prevent insects, fly lamps are set in the workshop to prevent insects and rats, and protective covers are set in the drainage ditch connecting the workshop with the outside world to prevent insects and rats from invading.

4.2 Specific measures and methods for rat prevention

4.2. 1 The sewage outlet of the workshop is sealed with a net.

4.2.2 Cement slab sealing of drainage pipes outside the workshop.

4.2.3 Rat-proof clips should be placed on both sides of the door of material warehouse and other doors directly communicating with the outside world.

4.2.4 Place a mousetrap every 15m on the periphery and around the factory.

4.2.5 The living quarters shall be cleaned by special personnel, and the domestic garbage shall be transported away in time to keep the factory clean.

4.3 Insect prevention measures and methods

4.3. 1 Spray pesticides around the workshop regularly every week.

4.3.2 Each entrance door is double-cushioned, and insecticidal lamps are installed at necessary positions at the entrance.

4.3.3 There are two buffer rooms at the entrance of raw materials.

5 monitoring

The controller checks the rat catching equipment every day and replaces it according to the regulations. Every Friday, he checks the insecticidal lamp and records the corresponding situation.

6 corrective measures

6. 1 According to the number and times of dead rats and traces of rat activities, adjust the rat prevention plan in time, adjust the density of rat catching equipment or replace other types of equipment if necessary.

6.2 According to the inspection records of the insecticidal lamp and the occurrence of pests, adjust the insecticidal scheme in time, repair or replace or encrypt the insecticidal lamp when necessary, and take other measures.

6.3 In the season when insects and rats are active, strengthen measures when necessary.

6.4 If traces of rat activities are found in the warehouse of raw and auxiliary materials, it must be reported to the relevant leaders, and the rat damage should be evaluated and dealt with accordingly.

7 record

7. 1 Plant Insecticidal Record Form

7.2 Rodent Control Record Form

7.3 Record Form of Factory Environmental Hygiene Inspection