First of all, how to use the electric steamer?
Second, the use of electric steamer matters needing attention
A, automatic water electric steamer to check whether the water supply pressure meets the requirements of the manufacturer, whether the water inlet valve is open, whether the drain valve is closed. Whether the drain valve of the manual water injection electric steamer is closed.
Second, check whether the water level of the automatic water adding electric steamer is basically immersed in the electric heating tube, and whether the water supply of the manual water adding electric steamer reaches the water level mark.
Third, the door should be closed tightly to avoid steam leakage, otherwise it will waste energy and easily cause burns to the operators.
Fourth, when opening the door of the box after work, the steam in the box should be completely released to avoid scalding people.
Fifth, when the electric steamer fails, because it is a metal shell, the power supply should be turned off first, and then the fault should be checked. It's best to notify professionals for maintenance to avoid danger.
Sixth, the water in the compartment should be discharged after use, so as to prevent the electric heating tube and metal surface of the electric steamer from aging due to moisture. Remove the dirt on the electric heating tube, so that the electric heating tube can conduct heat quickly and avoid overheating and burning out.
Seventh, clean the inner and outer surfaces and keep the electric steamer clean and hygienic, but spray washing is not allowed, which will lead to damp, short circuit and even leakage of all electrical components.
Eighth, when using the steamer with piezoelectric, please set the size of the pressure valve at about 80kpa, which is beneficial to protect the safety of operators. Don't leave people during the operation. If necessary, cut off the power supply when walking.