1. Preparation: Before installation, it is necessary to measure and confirm the position and length of the sewer pipe in the ceiling, and prepare the required materials and tools, such as iron saw, screwdriver, water pipe clamp, water pipe connector, sealant, etc. At the same time, all water-related equipment in the room should be turned off, and water pipes should be turned off to avoid accidental water leakage and water leakage during installation.
2. Installation of the bracket: firstly, the bracket needs to be installed with nails or expansion bolts according to the set position to fully support the weight and operation of the suspended ceiling sewer.
3. Interface treatment: Then it is necessary to determine the gap between the sewer pipe and the wall, and fix the water pipe clamp between them to ensure its stability. Then, it is necessary to connect the sewer pipe with the ceiling sewer pipe with a water pipe joint, and at the same time seal the interface to avoid water leakage.
4. Drainage pipe connection: After the installation of the suspended ceiling sewer is completed, it needs to be connected with the main sewer system. This step should be carried out in strict accordance with the relevant regulations, and the joints should be sealed with sealant to avoid water leakage.
5. Inspection: After the installation is completed, inspection and testing are needed to ensure the normal operation and use of the suspended ceiling sewer, and solve some problems in time, such as water leakage, blockage and timely elimination of odor.
In a word, the installation of suspended ceiling sewer pipe is more complicated. In the installation process, attention should be paid to the selection of materials and the correctness of installation methods to ensure its normal operation and use. After installation, check and test in time to ensure the normal, smooth, stable and effective sewer pipes on the ceiling.