Stainless steel single sink should be how to choose to buy it? Corresponding quality identification methods and what are they? Recommended for you today is the content of these two aspects, from which you can start to know, first of all, then in the process of choosing to buy a sink, first of all, should consider the depth, there may be some stainless steel single sink can not be matched with large domestic appliances and each other to use, and secondly, then you should purchase as much as possible to prevent corrosion of the material, corresponding to the quality of the method of identification of a number of ways, including their anti-theft hard treatment, surface treatment, the corners of the treatment is not appropriate, there will be no corrosion, and what are the methods of identification of quality? The corners of the treatment is not appropriate, there will be no potential safety hazards, these all determine the actual use of the later effect.

A, stainless steel single sink purchase notes

In the purchase of the sink, the first should consider the depth, part of the imported sink is not suitable for domestic large pots and pans, followed by the size. Whether the bottom of the moisture-proof measures are also not to be missed, and pay attention to the following points.

①Decide the size of the sink according to the size of the cabinet countertop, because the sink can be installed on the counter, in the counter, under the counter, so the size of the choice is different.

② Selection of stainless steel sink, the material thickness should be moderate, too thin will affect the service life and strength of the sink, too thick easy to damage the dishes being washed. Also look at the flatness of the stainless steel surface, such as unevenness indicates poor quality.

3 Usually, the practicality of cleaning a larger volume of the sink, the depth of about 20 centimeters is better, so that you can properly prevent splashing.

④Sink surface treatment to matte surface for beautiful and practical, sink welding should be carefully observed, the weld must be flat and even, no rust spots.

5 beautiful, well-designed, with an overflow is good.

Two, quality identification methods

1. The thickness of the sink steel plate: high-quality sinks imported 304 stainless steel plate, the thickness of 1mm, while the ordinary low-grade sinks using 0.5mm-0.7mm, the method of identification can be identified from the weight and the surface of the surface whether the two aspects of identification.

2. Anti-noise treatment: high-quality sink bottom after spraying or sticking rubber sheet and does not fall off, can reduce the faucet out of water on the bottom of the basin caused by the impact of the rattle, play a buffer role.

3. Surface treatment: high-quality sink surface flat, soft visual luster, not easy to stick oil, easy to clean, wear-resistant.

4. Inside edge treatment: high-quality sinks inside the corner close to 90 degrees, the sink inside the visual larger, basin volume is larger.

5. Supporting components: high-quality drop head requires thick wall, smooth processing, never leakage when the cage is closed, touch the bead durable and comfortable feel. Drop tube requires environmentally friendly disposable material made of easy to install, anti-odor, heat-resistant, aging-resistant and other features, durable.

6. Sink molding process: one-piece molding technology solves the problem of leakage due to the basin welded welds can not withstand a variety of chemical liquids (such as detergents, stainless steel cleaners, etc.) corrosion. One-piece molding process is a particularly important process, the steel material requirements are very high. What kind of process is used is a clear reflection of the quality of the sink.

Executive standard: QB/T?XXX-2008 "household stainless steel sink"

Today we recommend the purchase of stainless steel single sink recommendations and quality identification methods, from which you can start to know, in the process of choosing household stainless steel single sink, you should pay attention to the thickness of the sink steel plate, anti-noise treatment, the surface of the treatment, the treatment of edges and corners, as well as the appropriate components. Supporting components, in addition to the appropriate and reasonable stainless steel single sink beautiful shape, reasonable design, service life is also very good, the surface is flat, will not release toxic and harmful pollutants, is a green new building materials, suitable for installation in the modern simple and generous kitchen inside or inside the back of hotels and canteens, I believe that we can achieve satisfactory results.

Tubapu online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~