First, plug in the power supply, turn on the power switch, and start setting the temperature and baking time;

Press the MODE key for the first time to set the highest temperature of the baking tray to 330, then press the second time to set the time parameter to 30 seconds, and finally press the last box key to confirm. Then turn off the power supply, and the parameter setting is completed.

Second, start making cups:

1.

Cut out the printed picture, wipe the surface of the cup with clean paper or towel, stick the picture on the cup, and then fix it with label paper or high-temperature adhesive tape (note, when fixing the picture, be sure to carefully determine the position of the picture to prevent it from sticking wrongly and leaning on the baked printed cup.

2.

Then put the cup into the cup baking machine, adjust the pressure and press the pressure handle. The pressure is like this. The cup is pressed tightly, and you can feel a little pressure when you press the handle.

3.

Turn on the power and light to start heating and baking. When the temperature value shows 180 degrees, the machine will start to maintain a constant temperature. At this time, press the timer switch, the timer starts to work, and the meter displays the countdown. When the countdown reaches zero, the machine will sound an alarm, turn off the power switch, take out the cup, and then gently remove the transfer paper. A beautiful personalized impression cup is made.

Causes and solutions of poor printed images;

1: The color is too light, the temperature is too low or the pressure is uneven or the time is too short. Solution: increase the maximum temperature (3-5 degrees each time) or increase the pressure, or extend the baking time (10-20 seconds each time).

2. Pattern blur: ink diffusion. Solution: The printing time is too long, and the printing time is reduced.

The surface of this painting is dull. Solution: If the pressure is too high and the temperature is too high, it should be reduced accordingly.

4. The pattern is partially blurred: if it appears in one place every time and the heating pad is uneven, replace the heating pad.

Note: the heating pad of the cup baking machine is not afraid of empty burning, so you should try to avoid baking cups when the height of the cup body is much lower than the backrest pad. Similarly, you should try not to bake only a part of the cup in the baking coaster. If you want to put a pattern on a part of the cup, you should deal with the picture design. Even the best equipment needs your care.