Purifiers generally have purification systems, which are mainly used to purify the air. We can use it to purify indoor air. But it needs to be cleaned with a purifier for a long time. So how do we clean it up? Let's take a look!

1, remove

When you are ready to disassemble, first make sure that the purifier is empty, which is the premise. If there is nothing empty, you can touch it with your hand to see if there is still electricity. If there is still no power, you have to replace it with a new one, but it depends on how you judge whether the machine is broken or not and whether it needs to be replaced. If there is no peculiar smell on the machine, it can be disassembled directly. However, it should be noted that never use a blade to directly cut the screws on the purifier shell.

Step 2: Clean

Wipe off the dust on all parts with a dry cloth, which can be wiped off with a sponge or a wet cloth. For places that are easy to absorb dirt, you can use a vacuum cleaner to clean them. After disassembling the machine, take out the filter to dry the dust on the surface! At the same time, take out the filter screen, shake it a few times, and then dip the rag in water to clean the dust. Clean the filter and put it back. Put it back in its original place and it can be used normally!

3. Replace the filter screen

When we use it, we should pay attention to the need to replace the purifier when there are more pollutants in the purification system. Remember to take out the filter screen on the machine when replacing it, and just remove it. It should be noted that the filter screens of purifiers from different manufacturers have different shapes, so attention should be paid to details. Remove the removed filter and put it back, or the machine will smell. In addition, it should be noted that the screen of the screen needs to be replaced many times. You can't change more at once. If the filter screen can't keep the filtering function for a long time, the filter element will be polluted and become solid dregs.

4, clean up the residual dust

After turning off the purifier, clean up all the dust. If some accumulated dust is difficult to clean, you can wipe it with a cotton swab dipped in some detergent against the gap or the air inlet of the fuselage. If there is residual oil, it needs to be removed and wiped clean with a soft cloth. If there is nothing dirty, you can use it safely, or spray some water at the air outlet for wetting operation. Because moisture will accelerate the reproduction of bacteria, so pay attention to dry it with a dry rag.