Try not to install the range hood too high. If it is too high, the oil fume will spread easily and the exhaust will not be clean. But it is too low to meet, which affects the operation. Generally, the top of the range hood is 60 ~ 80 cm from the gas stove to the bottom of the range hood. You can install the height according to the actual situation, and there is no specific installation size.
Height refers to the distance from our ground to the ceiling, generally 2.2-2.4 meters; Smoke exhaust hole size18cm *18cm; The distance from the table refers to the distance from the ground to the stove, which is generally 80-85 cm. If you plan to make cabinets around the range hood, you can pay attention to the above three dimensions for installation. Whether it is a European machine or a side suction machine, attention should be paid to the height of the floor and the distance between the smoke exhaust hole and the table when installing.
Side suction does not have this problem, even if the lower end is attached to the stove, it will not touch it. Therefore, the side suction type is superior to the smaller one of the two disadvantages, and the deficiency of suction effect can be made up by reducing the height.
Of course, it should not be too low. First, it affects the position of the cooker. Second, it is too close to the furnace mouth. The flame will directly barbecue the range hood, accelerate the aging of the range hood, and may also ignite the accumulated oil in the range hood. If it is sideways suction, it is most suitable to be about 30–40 away from the table, because at this height, the suction of the range hood is the best.