Current location - Recipe Complete Network - Catering training - Which unit should be responsible for reporting the accident after the accident of engineering and professional subcontracting?
Which unit should be responsible for reporting the accident after the accident of engineering and professional subcontracting?
Which unit should be responsible for reporting accidents in engineering and professional subcontracting? Generally don't report the accident, just handle it privately. If the report leads to rectification, the construction period will drag you to death.

Compensation for accidents caused by subcontracting of construction projects is illegal. Violation of Item (4) of Article 78 of the Regulations on Quality Management of Construction Projects shall be punished in accordance with the provisions of Article 62 of the Regulations.

In the event of a safety accident, it shall be punished in accordance with the relevant provisions of the Regulations on the Administration of Work Safety in Construction Projects.

The above two penalties are calculated together.

It's not just a question of compensation.

An accident of a unit employee shall be recognized as a work-related injury.

What should users do after an elevator accident? First, quickly press the button on each floor (no matter how many floors there are).

Second, if there is a handle in the elevator, please hold the handle tightly with one hand.

Third, the whole back and head are in a straight line with the inner wall of the elevator.

Fourth, the knees are bent.

Explanation: Because you never know when it will fall to the ground, it is likely to be broken and dead. So:

The first point is that when the emergency power supply is started, the elevator can stop descending immediately.

The second point is to fix your seat so that you won't fall down because of the unstable center of gravity.

The third point is to use the elevator wall as the protection of the spine.

Fourthly, and most importantly, ligament is the only elastic tissue in human body, so bending knee to bear heavy pressure is more important than bone.

How to divide the responsibilities between the power engineering subcontracting team and the power system depends on how to determine the safety responsibility clauses in the project contract. The general responsibility shall be borne by the construction unit itself, unless there is reliable evidence to prove that it is the responsibility of the power system.

Which unit is responsible for handling traffic accidents in Xinyang is the responsibility of the public security traffic police department, and there is a special accident handling agency.

Xinyang is a prefecture-level city, which governs eight counties and two districts, such as Chanhe District, Pingqiao District, Huangchuan County, Huaibin County, Xixian County, Xinxian County, Shangcheng County, Gushi County, luoshan county County and Guangshan County. I want to know where your accident happened. Basically, every county has a traffic police brigade, which is responsible for the management of vehicles, order and accidents in its jurisdiction.

The boss asked to postpone the shift ... and then an accident happened. See if the responsibility for the accident is illegal. Who is responsible?

If not, the workers are caused by fatigue, and it is the boss's responsibility to delay the shift.

Which judicial authentication unit to look for when a hydraulic elevator accident occurs is an investigation process in which the traffic management department of the public security organ assigns or entrusts professional technicians and qualified authentication institutions to carry out maintenance, analysis and judgment in order to solve some special problems in traffic accident cases. Common traffic accident identification includes forensic identification, material evidence identification, vehicle identification, road identification, accident cause identification and property loss assessment. 1. Autopsy: Autopsy is divided into autopsy and autopsy. Body surface examination is a routine examination of the surface scars of dead bodies in traffic accidents. It confirmed the nature of the case, proved that the body scar of the deceased was the result of the traffic accident, found out the cause of death, and analyzed the mechanism of the wound of the deceased, serving for the restoration of the traffic accident. Anatomical examination is mainly used to determine the detection direction through autopsy and provide evidence for solving the case; Second, multiple vehicles collided and crushed the body, looking for the first collided vehicle and confirming the direct cause of death; Third, the cause of death is unknown. 2. Identification of minor injuries and serious injuries: check the causes and conditions of injuries caused by traffic accidents and identify the degree of injuries according to standards. If the perpetrator has one of the following circumstances, the victim must be considered as minor or serious: driving after drinking or taking drugs; Driving without a license; Driving a motor vehicle knowing that the safety device is incomplete or the safety components are out of order; Driving with knowledge of unlicensed or scrapped motor vehicles; Serious overload; Escape from the scene of the accident. 3. Identification of injury mechanism: The causal relationship between the injury site and the consequences of traffic accidents is determined through human injury inspection, which mainly provides a basis for analyzing the causes of accidents, excluding non-traffic accidents and mediating damages. If there is doubt about the damage of the injured object in the traffic accident or the parties have disputes about the consequences of the damage, the damage mechanism can be identified. 4. Disability assessment: After the treatment of traffic accident victims, if the parties think it is necessary to claim disability due to traffic accidents, they can entrust forensic doctors to carry out disability rating as proof. Both parties choose the traffic control department for mediation, and the injured can carry out disability assessment after the treatment. 5. Alcohol content detection: If the driver of a vehicle has one of the following circumstances, he must detect the blood alcohol content in his body: traffic accidents cause death; Serious injuries caused by traffic accidents; More than 3 people were injured in a traffic accident; The traffic accident has a bad influence; The driver of the vehicle is suspected of drunk driving; One party suspects or accuses the other party of drinking; The driver of the vehicle leaves the scene without authorization and returns or is captured within 24 hours; The traffic police found that the driver of the vehicle was suspected of drunk driving or drunk driving bicycles, tricycles, electric tricycles, motorized wheelchairs for the disabled, etc. , and the driver of the vehicle disagrees with the result of the alcohol breath test, or the test result exceeds the critical value of drunkenness. 6. Vehicle safety and efficiency inspection: the vehicle inspection objects in traffic accidents are: traffic accidents; Traffic accidents cause serious injuries or serious injuries to more than 3 people; Traffic accidents have a bad social impact; The motor vehicle is unlicensed or fails to participate in the annual inspection as required; The vehicle type of traffic accident is not clear; According to the case, it is necessary to inspect and identify the accident vehicle. 7. Identification of the mechanical failure of the accident vehicle: Through the disassembly and inspection of the specific parts of the vehicle, find the vehicle failure and find out the cause of the failure, so as to distinguish between human responsibility and mechanical failure. 8. Vehicle type identification: If the vehicle type is unclear, it shall be identified to clarify the right of road travel. 9. Trace identification: by extracting contact traces related to traffic accidents, such as comparison and testing, it is determined whether there is a relationship between cars, objects and people such as collision, scraping and rolling; If it is impossible to determine the vehicle that caused the accident, the relationship between the separation and the vehicle, the object and the human body can be confirmed through the overall separation trace identification; If the accident vehicle has a flat tire, the cause of the flat tire can be confirmed by tire trace identification; When there is an accident at night and the lights are damaged, you can identify the cold and hot light sources to determine the opening and closing of the vehicle at the moment of the accident. 10. Fingerprint identification: it mainly solves traffic accident cases where the driver of the vehicle is uncertain, and the uncertain driver can do fingerprint identification. 1 1. Identification of trace substances: through the inspection of trace substances on site, the relationship between the substances and traffic accidents is determined. Common trace substances include paint, fiber, plastic, rubber and grease. 12. Identification of physical evidence: The samples of human hair, blood, flesh and blood, tissues and so on extracted by forensic doctors from the scene of traffic accidents can draw conclusions and provide evidence for confirming the identity of the driver or the deceased, the contact between the human body and vehicles or objects, etc.

Who is responsible for the accident when workers drink at the construction site after work? It is not a work-related injury, and the insurance company is not responsible. If the accident has nothing to do with drinking or not, if you buy accident insurance, the insurance company should have compensation. But if it was an accident caused by drinking, it would be nice not to be held accountable, and there is no way to compensate. But for humanitarian reasons, if the other party has died, the employer usually has to suffer a small loss. Employers always have the problem of poor supervision, and they can't run away with great responsibilities.

What is the owner's responsibility for an accident in the construction process after the project bidding? 1. The state has clear regulations on the identification and qualification of construction accidents, and the specific situation needs specific analysis.

2. The standard contract text and relevant management regulations of the project country have detailed requirements and penalties for the responsibilities, obligations and rights of all parties.

3. Written visas, meeting minutes, instructions, certificates, explanations and other materials in the construction process are important proof of responsibility.