Current location - Recipe Complete Network - Catering training - Commitment letter of safety management
Commitment letter of safety management
In daily study, work or life, many people have written letters. Letters are applied documents for greeting, talking and contacting relatives, friends and comrades. You can't write a letter, can you? The following are four safety management commitments I collected for you, hoping to help you.

Letter of Commitment on Safety Management 1 Organizer: Cixi Taixing Electronic Engineering Co., Ltd.

We promise that during the construction, we will strictly abide by the Construction Law of People's Republic of China (PRC), the Law of People's Republic of China (PRC) on Safety in Production and the safety management regulations and rules of local construction projects, and earnestly implement the safety production policy of "safety first, prevention first".

Civilized construction shall be carried out in strict accordance with the Regulations on Comprehensive Management of Construction Project Safety Production and other departmental documents, and various safety protection measures shall be earnestly implemented to ensure safe production and civilized construction on the construction site. Strictly abide by the Labor Law of People's Republic of China (PRC) and relevant laws and regulations, establish and improve the labor safety and health system, and strictly implement the national labor safety and health regulations and standards to prevent accidents in the labor process. Sign labor contracts with construction workers, handle labor employment procedures, and purchase accident and medical insurance such as medical insurance, industrial injury insurance and accidental injury insurance for construction workers. Carry out necessary safety and civilization education for construction personnel entering the site, provide necessary labor safety protection articles, ensure the safety of the construction process and the personal safety of personnel, and be responsible for the safety of on-site construction personnel. In the process of engineering construction, the construction shall be carried out in accordance with the safety operation rules. All personnel entering the site must wear safety helmets, and safety belts must be used for aerial work. In case of violation of the above provisions, the promisor shall compensate the losses caused to the contractor, and the contractor has the right to terminate the contract in advance. If property losses and casualties are caused by the promisor's reasons or ineffective safety measures, the promisor shall bear the responsibility for the safety accident and the expenses arising therefrom.

I. Safety management

1. Establish and improve the safety production guarantee system and safety production responsibility system, and formulate safety production rules and regulations and operating procedures. Capital investment required to ensure the safe production conditions of the unit. Establish a safety production management organization, equipped with full-time safety production management personnel. Implement the project safety production inspection system, regularly carry out safety inspection on the project construction personnel and construction site, and make safety inspection records. Be responsible for the contractor and fully obey the contractor's safety management at the construction site.

2. We appointed Jiang Jun as the project leader to be fully responsible for the construction safety of this project. The safety responsibilities of the project leader mainly include: implementing the safety production responsibility system, safety production rules and regulations and operating procedures; Ensure the effective use of safety production expenses; According to the characteristics of the project, organize the formulation of safety construction measures to eliminate hidden dangers of safety accidents; Timely and truthfully report production safety accidents.

3. Wang Futao is the site safety officer, responsible for the realization of the project safety objectives. Full-time safety production management personnel

Safety responsibilities mainly include on-site supervision and inspection of production safety; If hidden dangers of safety accidents are found, it shall report to the project leader and the safety production management institution in a timely manner; Should immediately stop illegal command and operation.

Second, safety education

1. We will carry out safety technical disclosure before construction, classify it downwards, and finally implement it to operators.

2. Implement the safety production education and training system, regularly train the construction personnel, and make relevant records.

3. We will give three-level safety education to new construction workers (contract workers, temporary workers, employees seconded from other units, etc.). ) before construction and make relevant records.

4. We will regularly organize all construction personnel to carry out safety education and summarize the existing problems in safety. Make necessary disclosure on safety key points and matters needing attention, so that construction personnel can know fairly well and form a solid safety awareness.

5. Before new technology, new technology, new equipment, new materials and new products are put into production, special education and training should be given to post operators and related personnel according to the new operating procedures before independent operation can be carried out.

Third, safety protection.

1. Implement civilized construction requirements, promote modern management science, organize construction scientifically, and do a good job in construction site management; Abide by the relevant management regulations of engineering construction safety production, organize construction in strict accordance with safety standards, accept the supervision and inspection carried out by industry safety inspectors according to law at any time, and take necessary safety protection measures to eliminate hidden dangers of accidents. The responsibility for safety accidents caused by our reasons and the expenses arising therefrom shall be borne by us.

2. Strictly implement the national laws and regulations on safety production and labor protection, establish the responsibility system for safety production, strengthen standardized management, conduct safety disclosure, safety education and safety publicity, and strictly implement the safety technical scheme.

3. Formulate safety protection measures for construction site and construction electricity; On-site mechanical equipment safety protection; Measures for safe use of construction machines and tools; Safety protection of construction personnel; On-site fire prevention, windproof and other safety measures.

Regularly inspect and maintain various safety facilities and labor protection devices on the construction site, eliminate potential safety hazards in time, and ensure safety and effectiveness.

Consciously abide by and implement the construction safety inspection standards and related specifications of the Ministry of Construction; Consciously abide by the local government's regulations on safe construction and the laws, regulations, norms, standards and regulations on safe production promulgated and implemented by the competent department of industry, actively participate in various activities related to promoting safe production, and effectively protect the safety and health of construction personnel.

Respect and obey the existing rules, regulations and management methods related to production safety, strengthen their own management in accordance with the relevant provisions of the contract, and perform their duties and obligations. Organize all construction personnel to carry out safety education on a regular basis, summarize the existing problems in safety, and make necessary disclosure on safety key points and precautions, so that construction personnel can know fairly well and form a solid safety awareness.

Before new technology, new technology, new equipment, new materials and new products are put into production, special education and training should be given to post operators and related personnel according to the new operating procedures before independent operation can be carried out. All kinds of construction personnel must receive safety education and training before entering the construction site.

Second, the temporary electricity consumption

1. The installation and use of power lines and facilities on the construction site must conform to the installation specifications and safety operation procedures, and be erected according to the construction organization design. It is forbidden to pull wires and connect electricity at will. The construction site must be equipped with night lighting to ensure the construction safety requirements; Lighting and hand-held lighting lamps in dangerous and humid places must use voltages that meet safety requirements.

2. Where temporary lines need to be installed and used, the application for examination and approval shall be handled with the contractor's on-site project manager before installation. Without the approval form, it shall not be installed without authorization. Those who install it without authorization will bear the consequences.

3. The manager of temporary electrical equipment shall be responsible for the safety management during use, and do a good job in stopping, sending electricity, repairing damaged equipment, and reporting for dismantling when due.

4. The use time of temporary power lines is generally not more than 7 days, and the longest is not more than 3 months. Temporary power lines that have been used for more than 3 months shall be installed according to conventional power lines.

Three, the construction site hot work examination and approval system

1. The examination and approval system must be implemented for hot work on the construction site.

2. Hot work can only be carried out after the hot work application form is filled in and reported to the contractor's on-site project manager for approval.

3. The application form for hot work shall specify the place where the fire is used, the equipped fire-fighting equipment, the operating personnel, the guardian and the effective time, and keep the stub for future reference.

4. The operator must operate in strict accordance with the provisions of the fire certificate, and shall not change the operation content without authorization. If there is any change, you should re-apply for a fire permit.

5. The fire certificate is valid on the same day. After the work is completed, the operator returns it to the contractor's on-site project manager and reprocesses the operation.

Four, mechanical safety:

1. Before construction, the construction machinery, instruments and safety protection facilities shall be inspected to ensure compliance with safety regulations, and the inspection period shall not exceed.

2. Construction personnel should carefully check the construction area, working environment, operating facilities, equipment, tools, etc. Stop the construction immediately if any hidden danger is found, and continue the construction only after the rectification is implemented.

3. All kinds of equipment and construction tools used in the construction should meet the construction requirements. Before starting work every day, the scaffolding on the construction site will be inspected by special personnel, and the hidden dangers will be rectified in time. All kinds of safety protection facilities, fences, safety signs, warning signs and grounding wires are guaranteed not to be dismantled or changed without authorization.

Fifth, fire prevention.

1. We will establish and implement the fire prevention management system on the construction site in strict accordance with the provisions of the Fire Protection Regulations of People's Republic of China (PRC), set up fire protection facilities that meet the fire protection requirements, and keep them in a good standby state. When constructing, storing and using flammable and explosive equipment in fire-prone areas, special fire safety measures should be taken and relevant procedures should be handled at local authorities.

2. Fireworks are strictly prohibited in key fire prevention areas, and the explosion-proof performance of electrical facilities used in parts with explosion-proof requirements should be good. It is strictly forbidden to connect temporary power without permission. The use and installation of electrical products, the design and laying of pipelines must conform to the relevant national fire safety technical specifications.

3. All units and departments that need to use open flames in key fire prevention parts and their surroundings shall submit an application report for hot work in advance, which can be used or constructed only after being audited by the project department and approved by the project manager.

4. Any construction personnel shall not move, damage, misappropriate, dismantle or stop using fire control facilities and equipment. Do not bury the pressure ring to occupy the fire hydrant, occupy the fire spacing or block the fire escape.

5. Strengthen the safety and fire prevention education and management of construction workers, migrant workers and outsiders.

6. The specific fire control requirements of the construction site and dangerous places shall be implemented in accordance with the specific requirements specified in the engineering safety and civilized technology.

On-site management of intransitive verbs: take measures such as maintaining safety, preventing danger and preventing fire at the construction site; Conditional, should be closed to the construction site management. If the construction site may cause damage to adjacent buildings, structures and special working environment, safety protection measures shall be taken.

Strictly implement the national fire safety technical specifications and relevant laws and regulations, protect fire control facilities, prevent fires, report fires, and actively participate in organized fire fighting work. Conduct regular safety and fire prevention education for construction personnel, organize fire prevention inspection, and nip in the bud.

Carry out the safety management of special equipment according to the national General Rules for Safety and Hygiene Design of Production Equipment and relevant professional technical standards.

According to the requirements of Code for Design of Fire Extinguishers in Buildings (GBJ 140-90), warehouses should be equipped and fire safety inspections should be carried out frequently. Effective measures must be taken in time to eliminate fire hazards. The warehouse must meet the fire protection requirements. Smoking, naked flames and household appliances are strictly prohibited. Accommodation is strictly prohibited in the warehouse.

According to the Law of People's Republic of China (PRC) on Work Safety and the Regulations on Work Safety Management of Construction Projects (Order No.393rd of the State Council), the management of work safety is strictly implemented in accordance with relevant requirements and standards.

The safety management of the construction site should be implemented to all people, and the safety measures such as material stacking, garbage cleaning, fire and electricity use, explosion prevention and fire prevention at the construction site must be strictly implemented in accordance with the relevant national standards.

Temporary power lines, dangerous operations, on-site hot work and crossover operations on the construction site shall be approved by the project department in advance as required.

If the grade is higher, the project department shall report it to the higher authorities for approval before construction. Without approval, construction is prohibited.

Seven, dangerous operations

1. The dangerous operation submitted for approval should be an operation that is not common in construction and needs to be solved urgently. Before carrying out dangerous operations, fill in the "Application Form for Dangerous Operations" and report it to the contractor's on-site project manager for approval.

2. If you need to go through the examination and approval procedures, you should go through the examination and approval procedures in advance. Do not go through the examination and approval procedures, and are prohibited from taking up their posts.

3. People with contraindications, physical defects, poor labor discipline, drinking and poor mental state are not allowed to directly engage in dangerous operations.

4. After the application for dangerous operation is approved, the operation can only be carried out after the dangerous operation instruction is issued. Operators have the right to refuse dangerous operations without formal work instructions.

5. Before the operation, according to the operation content and possible accidents, carry out safety education for all dangerous operators and implement safety measures.

2. Commitment letter of the people's government on safety management:

As the legal representative (actual controller and main person in charge of operation) of an enterprise (unit), I solemnly promise to do a good job in production safety in this unit from 20xx to 20xx as follows:

First, firmly establish the concept of scientific development and safe development, strengthen the "bottom line thinking" and "red line consciousness", correctly handle the relationship between safety and production, and consciously not produce unsafe products. Effectively implement the main responsibility of the legal person, strictly manage safety, and strive to avoid fatal accidents and major property losses.

Two, seriously carry out the standardization of production safety, and effectively improve the level of enterprise intrinsic safety.

1, resolutely implement the policy of safety first, earnestly fulfill the responsibility of the first person responsible for safety production, set up a safety production management organization in accordance with the regulations, and equip full-time management personnel; At least once a month, I will preside over a special meeting on production safety, and study and solve the important problems of production safety in this enterprise in time.

2. Strictly abide by the safety laws and regulations, deepen the "three systems", do not organize production in violation of regulations, do not command in violation of regulations, and do not force workers to take risks in violation of regulations.

3 strengthen the supervision of major hazard sources, set up necessary protective facilities according to regulations, and implement regulatory measures and responsibilities.

4. Improve the hidden danger investigation mechanism, urge all departments to seriously implement the hidden danger investigation and management system, conduct a special dispatch meeting for hidden danger investigation and management once a month, achieve the "five implementations" of the hidden dangers identified, and eliminate major security risks during the year.

5. Conscientiously implement the requirements of putting prevention first, strictly implement the "three simultaneities" management system of safety facilities, continuously ensure that safety facilities are in good condition and up to standard, ensure the investment of safety production funds, and fully extract the safety production expenses according to% of the actual operating income of the previous year for special purposes.

6. Strictly implement the relevant regulations on occupational health, ensure that the working environment meets the requirements of laws, regulations and industry standards, provide necessary protective measures for injured employees, carry out health examination according to regulations, establish and improve occupational health files and occupational health monitoring files, and ensure that no occupational cases occur.

7, the implementation of the relevant provisions of the safety training, complete the annual training task, without training or examination unqualified don't arrange mount guard, seriously carry out safety production publicity and education, typical accident warning education activities.

8, in accordance with the relevant provisions and requirements, system and improve the emergency rescue plan, equipped with the necessary personnel and equipment, at least once a year to organize emergency rescue drills for major hazards.

9. Consolidate the achievements of "standardization of production safety", carry out a self-assessment of standardization of production safety once a year, and improve the standardization level and grade year by year.

Third, promise to do the following key tasks:

1, speed up the construction of railway informatization, popularize the use of electronic passenger devices for locomotives and comprehensive early warning devices for crossings, realize dynamic monitoring of railway transportation process, and promptly correct and deal with illegal acts;

2. Earnestly carry out the activities to create a "safe crossing", educate the crossing operators on safety warning, and conduct a safety warning education and training for all crossing operators before the end of 20xx to ensure that they are qualified and certified;

3, strengthen the management of dangerous goods transportation, strictly implement the provisions of loading and unloading and transportation; Actively carry out special rectification of anti-slipping, increase the intensity of line inspection, and timely repair missing or damaged safety facilities and equipment.

4. Conduct a self-assessment once a year against the standardized assessment, and report the self-assessment results to the industry safety supervision department. Enterprises that fail to meet the standards shall meet the standards before the end of 20xx.

Four, to the public commitment, publicity, accept the supervision of social and safety supervision departments and enterprise employees. Conduct a safety debriefing to the industry safety supervision department at the end of each year; Make a safety report to the workers' congress every six months.

Failing to fulfill the terms of commitment, voluntarily accepting the sanctions of disciplinary measures for dishonesty and the upper limit punishment stipulated by relevant laws; In the event of a fatal accident, take the initiative to suspend production or business for rectification in part or in whole, so as to achieve "four misses"; I voluntarily accept the relevant punishment of the government.

Commitment period:

Signature of undertaking enterprise (unit): signature of legal representative: signature of actual controller: signature of main person in charge of operation:

20xx65438+1October 24th

As a workshop safety assistant, in order to ensure the production and driving safety of our workshop. We solemnly promise to strictly perform the following duties and obligations in our work and life:

First, earnestly establish the idea of "safety first", have unshirkable responsibility for the safety management of this workshop, establish and improve the safety production management system, and implement the responsibility system for safety production for all employees.

Second, ensure that the railway safety rules and regulations and operating standards are seriously implemented and implemented in this workshop.

Third, constantly establish and improve the safety production rules and regulations and operating standards of this workshop, constantly improve the safety protection measures and one-day operation standards, and constantly promote the implementation of the safety risk management system.

Fourth, give priority to prevention, carry out safety risk management and hidden danger management, organize and supervise the safety inspection of this workshop, and implement corrective measures for hidden dangers of accidents.

Five, constantly improve their knowledge of production safety and management ability, not illegal command, supervision and inspection of the implementation of the rules and regulations of production safety, timely correct dereliction of duty and illegal behavior.

Six, to ensure the effective implementation of safety education and training, safety production; Assist workshop director to organize monthly safety production analysis meeting and weekly analysis meeting to solve problems and hidden dangers in safety production in time.

Seven, the implementation of security risk management, strengthen security risk judgment, risk identification, risk analysis, risk assessment, timely detection and accurate judgment of security risks, the implementation of scientific management and effective disposal of security risks, strengthen process control, to prevent accidents.

Eight, the full implementation of safety risk management, involving all aspects of safety management, only to implement the responsibility of safety risk management to everyone, every post, every operation group, every operation link, in order to achieve the whole process control of safety production management.

Commitment: XXX

X day, X month, 2009