Living Environment of Jinhe Garden in Piaoying, Ronghu Lake
The residential environment is very good, the greening is very comfortable, it has just rained, and the air is very fresh. The gate of the community is also magnificent, the access lanes are clear, and the building spacing is in line with the standards. The owners here are probably very satisfied!
The master said that the purpose of house inspection is to give the house an experience, evaluate its current state, and let the owners have a comprehensive, objective and prepared understanding of it. The figures measured by professional house inspection tools are more accurate, which ensures the professionalism of house inspection. Today's house inspection begins with doors and windows. The master first took out professional measuring instruments and opened the window to have a closer look.
The first thing I found was that the doors and windows were not closed. Although everyone will replace the doors and windows during the renovation, the developer is still responsible for this problem just after the delivery of the house. The owner can write it into the report and let the developer rectify it.
Supervision experience sharing: In fact, the acceptance of doors and windows is mainly to check the strength and function of doors and windows. The basic requirements are:
1, door window frame, vertical fan, not bent.
2. Hardware accessories: complete, correct and firm.
3. Whether the window drain hole has been opened. Dead water will flow into the profile.
4, glass pollution, no damage, double glass interlayer without dust and moisture, evenly separated.
5. The doors and windows are pushed and pulled smoothly, the surface is smooth, there are no serious scratches, and the profiles are not cracked or damaged.
6. Sealing quality: when the doors and windows are closed, there is no obvious gap between the fan and the frame, and the sealing strip is not loose, falling off or exposed.
Therefore, we must pay special attention to these six aspects when checking, and find unqualified ones as soon as possible.
The second step is water and electricity acceptance, which is a concern of many owners. Of course, the acceptance of water and electricity itself is also the most important link in the decoration. Because the water and electricity are not well done, it is difficult to rectify, and secondly it may lead to safety accidents. Therefore, in the house acceptance, the water and electricity acceptance must not be sloppy.
The master examined the ground carefully.
Sharing of supervision experience: precautions for water and electricity acceptance: 1. Water pipe: raw material galvanized pipe with no less than 8 teeth and 6 turns. 2. Pay attention to the wall when the water pipe is discharged, and don't discharge it under the floor, tiles or high altitude. If you must walk under the floor and floor tiles, the installation of water pipes must be straight, and joints are not allowed. The valves should be installed on the ground, and the water inlet pipe of the bucket should be installed with triangle valve.
3, the discharge of electrical lines, in addition to the hollow floor, but also wear pipes, such as PVC pipes, the wall thickness is not less than 65438±0.2mm ... Pay attention to the wall when paying off the wires, and don't walk under the floor or floor tiles.
4, gas (natural gas) to use open pipe, slope control, joint with hemp thick white paint, don't use raw material belt, but also for gas detection.
Finally, don't forget to ask the construction team to leave the wiring diagram, especially the hidden wires, and be sure to leave an accurate wiring diagram for emergency use.
Netizens themselves may wish to try, and their acceptance may be more able to find and raise problems, and it is also convenient to solve them in time.
The third step is wall acceptance, which requires the use of professional instruments! Our master brought an infrared tester to test the verticality between the corner and the ground.
The master picked up a pen and wrote the words "the inside corner is not straight" on the wall. There are two main reasons why the inner angle is not vertical. One is that putty has not been properly approved. This problem is not serious, as long as you pay attention when decorating, you can still borrow it back. Second, the wall is not vertical, which is a serious problem. Fortunately, this inspection belongs to the first case, and the owner only needs to adjust this problem in the future decoration, which can be solved.
Our owner asked the inspector, "Why do these problems exist in this new house?" ?
Home inspector happily explained: "It is a common acceptance problem that the internal angle is not vertical. There are two reasons why the angle of yin and yang is not correct. One is that the setting of standard bar during plastering does not meet the quality requirements, and the tool for controlling the angle of yin and yang is not long enough, so it is difficult to control the straightness of the angle of yin and yang. Another reason is that when painting, the angle of yin and yang is not treated, but it is scraped with putty for two or three times and becomes a crooked and irregular angle. The common problem of painting making the internal angle into a small sharp bend is that the painter did not use tools to smooth the internal angle after scraping putty, and as a result, the wall was bent with the bend after scraping white, resulting in uneven and square internal angle. One way to solve the problem of uneven external angle of interior wall is to find a large angle first, then a small angle, and then return to use the mud pole to flatten up and down the angle to form a right angle, which requires straightness and squareness, and pay special attention to the flatness of the facet and the width of the frame edge. In this way, after finding the square of the external angle, don't use the square finding tool to press the angle when the cement mortar is not solidified. When painting, use mortar to polish off the cement floating edge of the angle of yin and yang together, and then brush the cement slurry. The inner corner is 500mm, so knock on both the wall and the ground, see where there is an empty drum, and try to solve it in time to avoid unpleasant things after living in it.
The housekeeper also suggested that the repair of the empty drum must be cut along the empty drum, filled with cement and then painted. So is the crack in the wall. Cut up and down the crack or about 10 cm, reinforce it with steel mesh cloth, and then repair and paint it again. I have to give our house inspector a thumbs-up and check it carefully. No matter how big the problem is, no matter how small it is, it can't escape his "eyes".
The master carefully recorded the house inspection report and the house inspection was successfully completed.
After the test here, there is basically no problem. These are the steps of house inspection. Follow these steps and the problems in the house will be solved.
The free house inspection activities of Rilong Decoration will bring great convenience to the owners and solve more problems for the owners from a professional perspective. Owners who have not signed up for free house inspection should act quickly! Participate in free house inspection, so that you can get in touch with the construction site at zero distance and know the quality of the house in advance. Professional home inspector helps you solve problems!
& gt Take part in the free house viewing activity, and click here to register.
& gt The summary of the house inspection activities of Rilong Decoration Forum posted 9 points for attention in the early stage of decoration.
Rilong Decorates Bian Xiao: Directly Attacking Ming Di's Public Welfare House Inspection Activities in Huxi.
I can also be Bian Xiao, a home improvement inspector, to teach you the most practical decoration acceptance strategy.