Connect the hot water pipe of the electric water heater to the tee joint so that the kitchen can use a hot water. PPR hot water pipe is usually the one with red line.

If your kitchen is near the electric water heater, you can do this.

If the distance is far away and the water consumption in the kitchen is not large, you can directly install a small wall-mounted water heater in the kitchen.

In this way, the shortening of pipeline routing can also greatly reduce the cost of materials and trunking. It is also convenient for future use.

Extended data:

1. When using the electric water heater, turn on the power supply and the indicator light is on, indicating that electric heating is being carried out. When the water temperature reaches the set value, the indicator light goes out, indicating that the power supply is cut off. The indicator light goes on and off, indicating automatic heat preservation.

2. The electric water heater (water storage type) should be filled with water first, then electrified and heated, and can be used after preheating. In case of water pressure drop or sudden water stop, it is best to turn off the power supply.

3. All electric water heaters are equipped with faucets and reflux installation. Usually, blue indicates cold water and red indicates hot water.

When in use, turn on the "red" faucet and hot water will flow out. At this time, if the water temperature is too high, at the same time, unscrew the "blue" faucet and adjust the water output, and you can get hot water with appropriate temperature.

References:

Baidu encyclopedia _ electric water heater