This book strictly follows the principle of authenticity first, which is both artistic and factual. There is no distinction between Zhen and Jia Yucun. The author deliberately reveals the nature of the characters, which is the most important truth. At the same time, strive for details without adulteration and distortion. Before writing, authors often accumulate three times as much interview material as written works. After the manuscript is formed, it usually goes through three checks. Truth will surely make this book have lasting vitality.
Foreword, also known as preface, is usually used to explain the author's creative intention and writing process. It was also written by others, mostly to introduce and comment on the content of this book. There are three common types: author's preface, non-author's preface and translator's preface.
The author's preface is a preface written by the author himself, which is generally used to explain the idea, significance, main contents, key points and characteristics of the book, readers, relevant writing process and situation, arrangement and style, scope of application, readers' reading suggestions, explanations on the revision of reprints, and introductions and thanks from people who assisted in writing. Its title usually uses "preface" or "preface", and the simpler author's preface sometimes uses "preface" When there is another preface written by a non-author, it can be distinguished by preface, preface or author's preface. The preface written by the original author of the translation book specially for the Chinese translation, entitled "Preface to the Chinese Translation", usually comes before the table of contents, and if its content is directly coherent with the text, it can also come after the table of contents.
The non-author preface is the preface written by the author inviting famous experts or institutions to write this book. The content is generally to recommend works, evaluate works realistically, and introduce the author or people and things involved in the book. Its title is "preface" or "preface", and the author's name is attached. Non-author preface usually precedes the table of contents and author preface. If it is written for a series, it is also before the preface of the series.
The preface of a translator usually focuses on the translation intention, and some also include some transactional explanations in the translation process. Generally, the title is "translator's preface", and the simpler content can also be titled "translator's preface" or "translator's words", which usually comes before the catalogue.
In typesetting, we advocate our own style, but please pay attention to factors such as accuracy, neatness, consistent style and beauty. Please also pay attention to the order of each part of the paper, focusing on the wonderful model essay "Education Management Information System".
1, line spacing 1.25 to 1.5 times is acceptable. The font of the text is small four, and the font spacing is better. There is no need to set the document grid. If the line spacing or character spacing is abnormal, please check the line spacing and character spacing settings. If the settings are normal, please check the document grid settings or not aligned with the document grid.
2. It is the most standard to indent two characters in the first line of each paragraph. Setting method: After the paragraph is finished, move the cursor to the beginning of the first line, type two spaces, and set the first line to be indented by two characters. You can also use format brushes, paragraph setting dialog boxes, and so on. Indent as few paragraphs as possible.
3. Font spacing setting method: select text → right click → select font → select character spacing → select spacing, and set it as standard. You can also apply the Format Painter tool.
4. All English words are represented by Times New roman (or other English fonts, such as Courier New, try not to have a song style).
5. Pay attention to the hierarchical structure of article typesetting, that is, the setting of indentation, centering, bolding and font. Directory layout uses scattered alignment.
6. Suggestions for page setup: A4 paper, with upper and lower margins of 2.5cm, left margin of 2.8cm, right margin of 2.6cm and left margin of 0.6cm; The header is away from the upper boundary 1.7 cm, and the footer is away from the lower boundary 1.75 cm.
7. Except for the header and footer on the cover (please refer to the wonderful model essay for the setting of header and footer), other pages should be ok. The preface, abstract and table of contents shall be marked with the first, second and third pages, starting from the introduction of Chapter 1 as 1 page.
8. If all chapters are put in the same file, and the header and footer of cover, abstract, table of contents and body are set differently, you can set three parts respectively. Method: Insert → Delimiter → section break → Next page at the bottom of this section. In the next section, in the header and footer view, click the icon in the header and footer toolbar and set "Different from the previous section" to reset the header and footer of this section.
9. The layout of the chart and the table should be reasonable and centered, and both of them should be marked with "the chart on the table below" (any reference book in programming language can be used). It is suggested that the numbers of charts should be unified by chapter, for example, the number of the second picture in chapter 3 is 3-2. A chart should have not only numbers, but also titles. To edit graphic objects beautifully, it is best to circle them with the white arrows on the drawing toolbar before combining them. For the text with no border in the picture, the border color (such as 1, n, yes, no, etc. ) can be omitted in the text box settings. Flowcharts, block diagrams, tables and pictures should have titles.
10. The simple way to paste a picture into word is to grab the hard copy of the whole screen with the PrintScrnSysRq key, and then paste it in the Windows attachment → brush, that is, paste the whole screen. Cut this picture, keep the necessary parts, and then save it as a picture file (or paste it directly into word without saving the picture file). Insert the picture in the file in word, select the saved picture file, and it's done.
1 1. There are several ways to save space in image processing. A. use the windows "brush" to store the image as a 256-color bitmap, 16-color bitmap or a black-and-white map. B, use the "brush" to reduce the image, and then enlarge it in word. C, use other software to convert pictures into various jpeg formats, such as Acdsee, Kingsoft Internet Security, and of course, fireworks and photo shop can do any processing. Compared with true color bitmaps, these file formats can save more than 5 times the space.