00 1. Strengthen the management of electricity consumption to ensure the safety of electricity consumption. When using electric equipment such as electric kettle, fork, computer, audio-visual and water dispenser. , there must be someone who's in charge, always check the safety situation, find hidden dangers and unsafe factors, deal with them in time or stop using them, and don't use them in spite of illness.

002. No one is allowed to pull wires, install power sockets and power switches at will. Electric furnaces, rapid heating and heaters are not allowed in the factory, and special needs need to be approved. The use of high-power electrical appliances requires the consent of the person in charge to avoid overloading the circuit and causing it to catch fire.

003, the use of desk lamps, tape recorders, televisions, computers and other electrical equipment, must be attended, people go without electricity.

In offices, production workshops and other places where electrical appliances are concentrated, the main power supply should be cut off when commuting.

005, installation, maintenance and use of electrical equipment, must be operated by professionals.

006, circuit and electrical equipment management to establish a responsibility system, regular maintenance, and recorded. Switches and sockets are damaged and must be replaced immediately.

007. It is forbidden to use alcohol lamps, kerosene stoves, electric stoves and other illegal appliances in the dormitory. It is forbidden to pull lights and wires without permission, and it is forbidden to light candles.

008. Smoking or naked flame is strictly prohibited in the workshop.

009, in violation of the above provisions, and a fire accident, depending on the seriousness, shall be investigated for the responsibility of the relevant personnel.

00 Second, fire and explosion prevention of inflammable and explosive dangerous goods and places

00 1, inflammable and explosive dangerous goods should have a special warehouse, equipped with necessary fire-fighting equipment and facilities, and the warehouse management personnel must be full-time firefighters.

002, inflammable and explosive dangerous goods should be classified and stored separately. Flammable and explosive chemicals with conflicting chemical properties or different fire extinguishing methods should be stored separately.

003, inflammable and explosive dangerous goods should be inspected by the inspection department before warehousing, and warehousing registration.

004. Inventory items should be stored in stacks, with the area of each stack not exceeding 100 m2, between stacks not less than 1 m, between stacks and walls not less than 0.5m, between stacks and beams not less than 0.5m, and the width of main passages not less than 2m.

005, inflammable and explosive dangerous goods in and out must be carried out in accordance with the safety operation procedures, canteen, workshop related staff to stick to their posts, non-staff are not allowed to enter at will.

006. Flammable and explosive places should take fire-proof and explosion-proof measures and maintain the fire-proof and explosion-proof facilities according to the requirements of fire-fighting regulations.

Three, 00 fire inspection and inspection system

00 1, adhere to the patrol and duty system, and lead the shift system.

002, the personnel on duty must stick to their posts and shall not be absent without leave.

003, security guards insist on daily inspection, after work to conduct a comprehensive inspection.

004, key positions and departments designated persons on duty, check the key parts of fire safety after work and before work.

005, patrol personnel adhere to patrol once every two hours, carefully patrol without missing a doubt, and report in time when hidden dangers are found.

006, during the holiday, strict succession system, adhere to the day and night inspection system.

Four, 00 safety evacuation facilities management system

00 1, it is necessary to ensure that the safety exits and evacuation passages are unobstructed, and it is forbidden to lock or block the safety exits.

002, in order to ensure the safety of personnel evacuation in the workshop, the door of the workshop entrance should be able to open and close normally.

003, are not allowed to be stacked in the evacuation passage, so as not to affect the safety of emergency evacuation.

004. Clean the evacuation passage at any time and check the emergency lighting facilities. If it is damaged, it should be replaced immediately.

005. Whoever intentionally blocks evacuation passages, emergency lighting and other facilities shall be given a heavier punishment in accordance with relevant regulations.

Five, 00 fire duty system

00 1. The production workshop, warehouse and kitchen are the key fire control parts of our factory. On the basis of providing fire-fighting equipment with standard specifications and quantity, assign special personnel to be on duty day and night? .

002, patrol personnel on duty must take over on time, strict succession system, stick to their posts, and are not allowed to leave without leave.

003. After the succession, carefully check the places within the scope of their functions and powers, and report suspicious phenomena to the Ministry of Security in addition to registration and serious handling.

004. Patrol personnel on duty shall not drink or sleep at their posts. They regularly patrol their own areas and check every corner carefully.

005, the patrol personnel on duty must know the fire danger of this post, know the measures to prevent fire, know the methods to put out the fire, use fire-fighting equipment, handle the accidents of this post and call the police.

006. It is forbidden to use naked fire to keep warm and smoke in the offices of patrol personnel on duty in production workshops, warehouses and kitchens. Cut off the power switch and close the window and lock the door in time after work, and outsiders are not allowed to enter. After the work is over, those who continue to work should register for the record.

007, increase the guard duty on holidays.

008. Volunteer fire-fighting backbones with high ideological awareness, good physical and professional quality and strong sense of responsibility will patrol around key parts day and night to ensure uninterrupted patrol. Once a fire breaks out, it can be found in time and put out effectively, and the fire will be eliminated in the initial stage.

Six, 00 fire control facilities, equipment maintenance management system

00 1. The inspection and maintenance of all fire-fighting equipment and facilities in the unit shall be organized and implemented by the Security Department.

002. Check the fire-fighting equipment and facilities once a year and maintain them in time.

003, fire equipment, facilities, personnel, positions, parts of the management, to prevent damage, loss or

00 for other purposes, and no department or individual may occupy it for any reason.

004, fire fighting equipment should be set in the obvious place, to prevent the sun and rain.

005. If the fire-fighting equipment and facilities in the unit are damaged or lost, they should be transferred to safety in time.

00 report, by the Ministry of security to find out the reason, as the case may be.

Seven, 00 gas and electrical equipment inspection management system.

00 1. Electrical equipment should be installed and used correctly according to regulations, and relevant personnel must be trained before operation. All kinds of equipment must have valid qualification certificates stipulated by laws and regulations, and can only be put into use after being confirmed by the maintenance department. Electrical equipment should be inspected regularly by full-time personnel (at least once a month).

002, lightning protection, anti-static facilities to regular inspection, testing, inspection at least once every quarter, testing at least once a year and make records.

003, electrical equipment load should be in strict accordance with the standard, joint is firm, good insulation, safety device is normal and qualified, and there are good grounding facilities, grounding resistance should be tested in strict accordance with the requirements of electrical construction.

004, all kinds of lines should be isolated by casing, and under special circumstances, lead or rubber cables with good insulation should also be used. All kinds of electrical equipment and lines should be regularly overhauled to eliminate fire safety hazards that may be caused by insulation damage at any time.

005, without approval, it is forbidden to extend the wire without authorization. All departments should actively cooperate with the security team and maintenance personnel to check whether the extension cord is only for emergency use, whether the shell is in good condition and whether it is put into use after being tested by maintenance personnel.

006, electrical equipment, switch box line near the yellow area according to the standard of this unit, it is forbidden to pile up flammable and explosive goods and regularly check and eliminate hidden dangers.

007, equipment should be cut off after use. For the equipment that has not been debugged and maintained, the installation and maintenance personnel should cut off the power supply when leaving the site.

008, it is strictly prohibited to use open flame in the workplace without taking preventive measures.

009. The department that uses open flames should strictly abide by various safety regulations and operating procedures, so that no one will be left when using fire, and the fire will be put out when people leave. 10. No smoking signs should be posted in public places, and smoking is strictly prohibited. Every employee has the obligation to remind others to abide by the smoking ban in public places.

Eight, 00 fire hazard rectification system

00 1. If fire hazards are found and fire safety management regulations are violated, relevant personnel shall be instructed to make corrections on the spot and supervise the implementation of rectification.

002. For the fire hazards that cannot be rectified at the site, the safety manager of the subordinate department shall report to the person in charge of fire safety and the safety production department in time, and put forward the rectification plan. The person in charge of fire safety and the Ministry of Safety shall determine the rectification measures in time and make rectification within a time limit. Send someone to supervise and inspect, and follow up the rectification. Before the fire hazard is eliminated, temporary fire prevention measures shall be implemented to ensure fire safety.

003. For the fire hazards ordered by the public security fire safety department to be rectified within a time limit, the Ministry of Security should urge the relevant departments to complete the rectification in time within the prescribed time limit. And write a reply to the rectification of fire hazards, and submit it to the public security fire department for acceptance in time.

004. After the fire hazard rectification is completed, the fire administrator in charge of the rectification department shall hand over the rectification record to the head of fire safety and the security department for signature and confirmation, and keep it on file for future reference.

Nine, 00 full-time and voluntary fire brigade organization and management system

00 1, according to the actual situation of our factory, clear the centralized management department of daily fire control work.

002. The main task of the obligatory fire brigade is to implement fire laws and regulations, conduct fire propaganda, conduct fire safety inspection, and maintain the school's fire control facilities and equipment.

003, full-time fire brigade should seriously check the fire safety of our factory, and urge the rectification of fire hazards.

004. Strengthen fire-fighting tactics and technical training, constantly improve professional quality and fire-fighting ability, keep fire-fighting facilities and equipment in good condition, be familiar with and master the functions and usage of fixed and semi-fixed fire-fighting equipment, and keep the fire escape unblocked.

005, prepare for fire fighting, send out the police quickly, and accept the unified dispatch and command of public security fire control institutions.

00 X. Fire safety education and training system

00 1, regularly organize fire safety publicity and education activities, and conduct fire safety training for all employees once a year, strictly

00 grid implements the system of "training first, then working".

002. Employees who take up new posts and enter new posts must undergo fire safety training before taking up their posts, and can only take up their posts after passing the examination.

003. For employees in public gathering places, we will focus on training employees' organizations and guide the people present with the knowledge and skills of evacuation. Without training, you are not allowed to work.

004, timely organize fire safety responsible person, fire safety administrator, special type of work, key position personnel to participate in professional fire training organized by public security fire control institutions at all levels, and obtain training certificates and show certificates.

005, completes the file management of fire education and training, and establishes the registration card of fire education and training for employees.

00 eleven, fire fighting and emergency evacuation plan drill system.

00 1, at the beginning of the fire, on-site personnel should take materials nearby to carry out on-site self-help and fighting; Control the spread of fire. When necessary, cut off the power supply to prevent electric shock.

002, self-help, fire fighting, should distinguish between different situations, places, use different fire fighting equipment.

00( 1) When extinguishing electrical fires, dry powder fire extinguishers and carbon dioxide fire extinguishers should be used. Do not use water or foam extinguisher to prevent electric shock.

00(2) Dry powder fire extinguishers, carbon dioxide fire extinguishers or foam extinguisher should be used to put out oil fires.

003. When there is a big fire or personal injury, the on-site personnel should call the fire alarm telephone number "1 19", the emergency center telephone number "120" or the public security command center telephone number "10" for external support while organizing self-rescue; When asking for help, you must specify the location, fire size, fire-fighting materials, contact telephone number and other details, and send someone to the road to receive the police.

004, fire self-help escape; The first five minutes of a fire is the best time to escape. First, you should avoid the thick smoke, and those who can run down must never run up. The second is to avoid fire. You can't open the security door at once. Try to open the door with the back of your hand when the temperature of the facade is not high. Then evacuate to a safe place.

005, timely transfer the injured to the hospital for emergency rescue.

006. Quickly transmit information to the security department or office; The contents of the transmission include time, place, station, brief course, number of casualties and emergency measures taken.

007. After receiving emergency information, the Ministry of Security or the office shall immediately verify the on-site disposal situation and organize relevant personnel or emergency teams to rush to the scene.

008, the emergency team arrived at the scene, should obey the unified command of the site commander, according to the requirements of the division of labor evacuation, rescue materials, as far as possible to reduce the loss of life and property, to prevent the spread of accidents; When it may pose a threat to the safety of people inside and outside the area, people unrelated to accident emergency rescue must be evacuated urgently.

009, after the fire, the fire unit should protect the scene, accept the accident investigation, truthfully provide the fire accident. Assist the fire department to find out the cause of the fire, verify the fire loss and find out the direct responsibility of the fire.

00 10, the external transmission of emergency information is carried out by the Ministry of Security in accordance with the reporting procedures in the safety accident reporting and handling system.

00 1 1, the fire safety department shall check, rectify and implement the daily work according to the requirements of the Safety Inspection System.

00 Twelve, fire safety work assessment and reward and punishment system

00 (a) to make achievements in fire safety work, to be informed of praise or material rewards.

00 (2) Those responsible for fire safety accidents will be treated differently according to the severity of the consequences. The following acts shall be punished in accordance with the provisions of this unit, except that the person responsible for the accident who has reached the national regulations on administrative penalties for public security or has been investigated for criminal responsibility shall be handed over to the relevant state departments for handling according to law:

00 1, under any of the following circumstances, depending on the loss situation and attitude, in addition to ordering compensation for all or part of the losses, a verbal warning will be given:

00( 1) The use of inflammable dangerous goods is not carried out in strict accordance with the operating procedures or improperly kept, resulting in fire and fire with little loss;

00(2) Smoking in non-smoking places or improper disposal of cigarette butts caused a fire, with little loss;

00(3) Failing to clean up flammable items in the area in time, causing fire hazards;

00(4) Unauthorized use of extension cords, failure to use safe electrical devices or unauthorized addition of small-load electrical appliances;

00(5) False alarm of fire;

(6)00 fiddling with fire control facilities and equipment without approval without causing adverse consequences;

00(7) The department manager who fails to rectify the fire hazards put forward by the safety team in time and cannot explain the reasons;

00(8) blocking fire exits, blocking safety signs, etc. There will be no serious consequences.

002. In any of the following circumstances, depending on the seriousness and attitude, informed criticism shall be ordered to compensate all or part of the losses:

00( 1) unauthorized use of inflammable and explosive articles;

00(2) misappropriating the location of fire control facilities and equipment or using it for other purposes without authorization;

00(3) Violating safety management and operating rules, leaving without leave, causing minor fire alarm and fire loss;

00(4) Managers who force other employees to operate illegally;

00(5) Failing to handle the fire alarm in time according to the emergency handling procedures;

00(6) The management personnel did not cooperate with the inspection of the security team and refused to make rectification.

003. Whoever conceals the facts, refuses to deal with it, refuses to investigate it or provides false information about the fire accident shall be dismissed.

004. For those who violate the fire safety management and cause accidents (slight losses), but can voluntarily confess and actively assist the relevant departments to deal with the accidents and recover the losses, the punishment may be reduced or exempted as appropriate.