First, the shape of the partition space
In the living room, the beam across the living room is generally at the junction of the living room and the dining room. This kind of beam is easy to operate. The living room and dining room are separated by ceiling shapes and can be divided by beams. On the one hand, it is flush with the beam, on the other hand, it is lower than the beam surface 10cm, so as to make a stepped divided space; If the beam is at the edge, it can be made into a zigzag shape, and the lamp groove is equipped with lights to cover up, hide or divert attention.
Of course, there are also some self-built houses, and the long-span beam will definitely be in the middle of the living room. In this case, you can use Liang Pinghang as a ceiling, so you can't see where the beam is. You can also use this beam to divide the living room into two halls, one is the living room, the other is the dining room or the leisure world.
Second, pseudo-beam modeling
The pseudo-beam shape is more suitable for the case where the beam is in the middle of space. If the beam of this apartment is high enough, it can be hung on the ceiling, but usually the height of other people's apartments is not so high, so we must find ways to beautify this beam. In terms of beautifying the beam, the false beam shape is usually good.
Third, boldly "leave blank"
The so-called bold blank means not to do special treatment on the beam. Such bold treatment requires very careful design. If the beam is at the boundary of the space, the ring beam at the top and the wall below should be coated with latex paint of different colors to make the space more layered. For high-rise space, beams that are not directly treated actually look generous.