wps floor plan needs to be in the "form tool" drawing out, the specific operation is as follows:

Computer: Lenovo Xiaoxin

System: Windows 10

Software: wps10.2

1, floor plan is based on the completion of the form, so we first look at the production of the form: open the WPS text to create a new blank document, enter the main page in the toolbar above. >1, the floor plan is completed on the basis of form production, so we first look at the production of the form: open WPS text, create a new blank document, go to the main page, in the toolbar above, click on "Insert"

2, click on the Insert and then we choose "Forms ", then you will see the drop-down box shown in the figure below, these squares represent a single row and column, you can add according to their needs. In order to do the floor plan, I selected here is a row and a column.

3, add a good after we found a single row and column is particularly small, do not worry, we can adjust the form under the table, see the following operation. In the upper-left corner of the table in the following chart, the arrow pointing to the graphic is able to move the entire form, you can use it to adjust the position of the form in the document.

4, and the table next to and under the two + were added to add rows and add columns, respectively, in the form of the lower-right corner of the position of the form can be enlarged and reduced the size of the form, the use of these function keys, we adjust the form.

5, we adjusted the form, click on the form, we will see the top column of the toolbar will appear "Form Tools", click.

6, in the following toolbar to find the arrow pointing to the "Draw Forms" and click.

7, this time the mouse arrow will become the shape of a pencil, we need to draw according to their own plan outline, drawing lines, the following picture is a good job, we see here may feel some do not quite understand, and then look at our operations below, we will know.

8, above the drawing of the form of symmetry when I drew in order to the left and right so that are through the straight line, but there are a lot of us do not use, this time we click on the "Form Tools" under the "Eraser", the mouse arrow will become an eraser! shape.

9, we do not need the line with the eraser to erase, the following chart is the editor with the eraser after the effect of the map, is not a little bit of a plan feeling.

10, we labeled the name of these squares, enter the text, so that the floor plan to see more image. As shown in the figure below, we can see that we enter the text after the feeling of the text position is not good, we come back to adjust the next.

11, in the upper right of the page as shown below, click on the location of the arrow pointing to the "alignment", and then select "Horizontal Center" on it.

12, but sometimes we want to enter the text from the top to the bottom of the vertical arrangement, then just click on the top right of the page, "Text Direction" to select the vertical text alignment can be, and then in accordance with the previous step to make the text "horizontal center". aligned.

13, we can look at the results of our input text after the picture, is not looking more clear image? We can also continue to make.

14, the production of plane drawing time is certainly more than just rectangles and squares of these simple graphics, sometimes we need other shapes. Click "Insert" ?ú "Shape", where we choose their own graphics.

15, I chose the ellipse, add the graphics moved to the appropriate location, you can adjust the size of the graphics through the corners of the graphics, I used a small box marked out of the location.

16, but we added a good graphic is with color, so you can not enter text. Click on the graphic, the toolbar will appear "Drawing Tools", in which to find the red arrow pointing to the "fill" select "no fill color. You can change the color of the external lines of the selected graphic through the blue arrow pointing to the "outline".

17, we can also give their own plane drawing with different colors, click on the corresponding area of the form, select the toolbar in the "Form Styles" ?ú "Underline", there will be a lot of colors, we can freely choose.

18, our color plane drawing is complete, the following picture is the final result.

According to the above description of the use of WPS to draw the specific operation of the plan, you also hurry to draw it!