The gas stove hose is an important part connecting the natural gas pipeline and the gas stove, and its installation is directly related to people's life and property safety. Generally speaking, the installation steps of gas stove hose are as follows:

1. Choose the correct size of hard pipe and hose: Choose the correct size of hard pipe and hose according to the model of gas stove in the kitchen and the required gas flow.

2. turn on the gas source: before installing the hose, make sure that the gas valve is closed. If the gas pipeline is not connected, the gas source must be connected first.

3. connecting the hard pipe and the hose: connect one end of the hard pipe to the gas distributor on the natural gas pipeline, and then tighten the connection port between the hose and the hard pipe. When using a wrench to tighten the joint of hose and hard pipe, be sure not to use too much force to prevent the connector from being damaged when the wrench slides or the plastic washer is replaced.

4. test connectivity: after all connections are completed, soapy water must be used to test the tightness of gas connections to ensure that there is no gas leakage.

5. gas switch test: in order to ensure that the gas stove can work normally after successful connection, the gas switch test must be carried out first, and the igniter can be used to test whether the gas can burn normally.

In short, when installing the gas stove hose, you must carefully follow the above steps one by one to ensure that the gas stove can be used after the connection is successful, so as to ensure the safety of users. If you encounter the problem of installing the gas stove hose, it is recommended to consult professional gas maintenance personnel.