How to grasp the enterprise resumption of production
Reprint the following information for reference on how to grasp the safety management 1, the establishment of a sound system is the premise of a binding system is a very strong legal provisions, and regulations, provisions, norms, standards, decisions, etc. have the same effect, in the security appears to be more important, is to ensure that the production safety of a mandatory measure. Safety and production activities are inseparable. As long as there are production activities, there are safety hazards, in other words, safety is in the production activities. There are many factors involved in safety in production activities, mainly including: unsafe human behavior, unsafe equipment, material performance, wrong operation methods, environmental conditions of site operations, and so on. However, among these many factors, people, as the main body of production activities, play a key leading role in the process of production activities. Therefore, the process of production activities in the operation of human behavior for detailed specification and management, is inevitably one of the most effective measures, which requires the establishment of a complete set of systems and procedures, in the production of the system to regulate the actual operation of the site behavior. This is the first prerequisite for good safety work, as the saying goes: there are no rules to make a circle. 2, strengthen the management, improve the staff's sense of responsibility to improve the sense of responsibility, we are not unfamiliar with, but the sense of responsibility for the work of the staff is crucial. Strong sense of responsibility of the staff to observe the problem of subtle, and good at thinking about the problem, can promptly find the work of the hidden dangers of accidents, to nip accidents in the bud, to avoid accidents. Responsibility is not strong enough employees, careless observation, and not good at thinking about the problems observed, let it develop eventually lead to accidents. From this, we can see the importance of strong and weak sense of responsibility of employees. Technical level and then high staff, if you are not strong sense of responsibility, you can not find problems in a timely manner, the problem can not be found in a timely manner and how to talk about timely problem solving it? Such as our daily work in the inspection work, for a strong sense of responsibility for the staff, he must be able to inspect the contents of the inspection card in order to check, because these inspections are summarized in the work experience of our predecessors, is to find out the effective method of hidden accidents. Only in this way can ensure safe production, otherwise it is called "hanging" work, accidents are waiting for you, so the work to strengthen the staff's sense of responsibility training is very necessary, is indispensable. 3, strengthen the training work, improve the technical level of staff now many units of new college graduates are learning on the job, learning to work. Training work is a boring and repetitive work, with the rapid development of society, science and technology is constantly updated, therefore, strengthening the training of staff is particularly important. More can give new graduates a better development stage. A low level of technical staff, even if you have a strong sense of responsibility, but after the discovery of the problem, you can not timely and accurately to deal with production problems, which will lead to delays in dealing with the best time to deal with the problem, and ultimately to the production of huge economic losses. Therefore, it can be seen that training is very necessary, as soon as possible to improve the technical level of employees is urgent. Training is a variety of ways, can be used both within the training, can also be used outside the training, but also can be used between master and apprentice pass, help, generation, etc., so that the new college graduates in the work of learning, learning in the work of the current active learning less, passive learning more people, the effect of the training of the key to the leadership in the good and the bad, your work to grasp the fine, grasp the real, he learns a lot, to grasp the firm, therefore, the training work must not be Go through the motions, we must strengthen the training, perseverance. 4, universal education is the foundation since the human factor in the actual production always plays a leading role, then we should believe that by strengthening the management of human security education, so that safety is always interspersed in the production site, always emphasize the importance of safety to normal production and people, really do a vote for safety, and resolutely put an end to all the possible formation of safety hazards occur. Some data show that in the human responsibility of the accident, 88% of the responsible person is lucky, safety measures are not in place and caused. Indeed, in the enterprise's safety production practice is that some people have a "pass on the line" thinking, which led to the occurrence of accidents, light equipment damage, heavy personal injury or death, if each security responsible person can set up "only full marks" thinking, 100% of the time! Strictly according to the safety regulations; check in place, do not miss a detail; measures in place, do not miss a doubt, many accidents can be avoided. 5, strengthen supervision, strict implementation of the rules and regulations of the rules and regulations of the blood, can not be verified in blood. In the work, we must increase the implementation of rules and regulations to avoid habitual violations. Habitual violations occur around us, it shows that our managers on the daily work of supervision is not enough, there is paralysis in the mind, usually work safety is important, work is busy when the security of secondary ideas at play. Therefore, in the implementation of the system, we must adhere to the "emphasis on a hand, to eliminate misuse", "strict eight passes, the pursuit of zero error" and "three iron" against the "three violations". "Three violations" of the work concept. Since the formation of our project since last year due to the strict implementation of safety regulations, always put safety first, so the safety work is relatively stable, a strong boost to construction production. 6, details are the key I remember Comrade Deng Xiaoping's former residence of the opening lines of the long association is: a small macro, a big micro; success in the vertical and horizontal view of the failure of the subjective and objective view. This is the basic principle of any work we do. Through some "small things" can often reflect the overall level of things, and do "big things" also need to start from each specific "small things"; to make each of our work In order to make each of our work activities successful, we must carry out systematic planning and implementation from the vertical and horizontal aspects, for the reasons of failure, we should be realistic from the subjective and objective aspects of the reasons. Especially in our hydropower construction industry, is a high-risk industry, more disturbing factors, poor construction conditions, "small things" into a big disaster lessons, often seen. In fact, many accidents are caused by too many small defects, and sometimes defects are small, but often cause big accidents. Such as the U.S. space shuttle Challenger crashed because of a piece of unremarkable plastic foam quality problems; the U.S. space 3 fast to the moon but can not go, had no choice but to return, just because a 30 yuan of small battery is bad, cost hundreds of millions of dollars of space programs and thus failed. In our actual production activities, the same is true, a wrong action, the wrong signal, a moment of sloppiness caused by the omission should not occur, a mind to think of fluke, may cause unimaginable consequences. Therefore, we need to firmly establish the "one hundred minus one equals zero" security concept, in a hundred jobs, even if ninety-nine jobs are done, as long as one is not completely done, may result in the failure of the whole. From the big picture, from the small place to start, with iron general regulations to do a good job of security prevention, is to ensure the success of our business is the key to success. Second, grasp the management of equipment 1, strengthen the hidden danger of equipment management work Equipment is indispensable in production, life, it runs normal or not will directly affect the safety of the production of the device, therefore, the hidden danger of equipment management work is particularly important. Especially in water conservancy and hydropower construction units, the health of various large-scale equipment is very important. Therefore, it is necessary for our employees to better maintain it and care for it in their daily work, and ensure safe production by ensuring the safe operation of the equipment. Hydropower construction environment is poor, high intensity of operation, continuous construction time is long, coupled with the low unit price of the winning bid, the equipment is old and aging, slow update, maintenance is not enough, so there are many shortcomings of these equipments, which requires our employees in the daily inspection work should be done, careful inspection, accurate judgment, to find the root cause of the accident hidden trouble, to nip it in the bud, to avoid affecting the safety of production. 2, the use of advanced technology, the realization of the intrinsic safety of equipment With the rapid development of modern science and technology, a number of technologically advanced, intrinsically safe electrical equipment was born. In hydropower production, the use of intrinsically safe equipment has a very important significance for safe production. It can reduce the labor intensity of employees, but also to ensure safe production and create greater economic benefits. Higher technical level of employees is also difficult to avoid conventional electrical equipment does not occur to affect the safety of production failure factors, which is determined by the performance of conventional electrical equipment, only intrinsically safe electrical equipment can easily allow employees to realize this desire. So in production, life in large quantities of intrinsically safe electrical equipment is the requirements of the times, the need for safety, the desire of the staff, our water conservancy and hydropower builders, managers should pay attention to this work. 3, to strengthen the careful operation of anti-unauthorized command of large-scale machinery and special equipment should be operated carefully, and adhere to the anti-unauthorized operation, against the rules and regulations of the command. Especially against overloaded operation, maintenance and overhaul is to protect large machinery and special equipment, normal, healthy work is an important part of the review of hydropower construction, due to the operation of the equipment or due to the quality of the equipment itself, caused by unsafe accidents, any project has occurred, the loss is heavy, the lesson is profound. Therefore, should adhere to the daily maintenance, overhaul system, nip the unsafe state of things in the bud, reduce the unsafe behavior due to people against the rules of command, against the rules of operation. Accidents caused by defects in machinery and equipment to ensure safe production.