Gas cooker size
Gas cooker size is relative to the embedded gas cooker, only embedded gas cooker to distinguish (fēn) the external dimensions and opening size, gas cooker size mainly includes the external dimensions of the gas cooker and opening size. Gas cooker exterior size is the size of the cooker surface, the size of the cooker appearance size; also panel size, due to the size of the panel is larger than the cooker body, to the largest size as the exterior size.
Gas cooker opening size (also called gas cooker dug hole size) that is the chassis outer diameter size, the cooker installation dug hole size, much smaller than the external dimensions, is the size of the cooker body size. As embedded to be embedded in the cabinet, to open the hole, the real hole size should be a little larger than the gas cooker labeled hole size, but not too large, otherwise the gas cooker installed will be loose.
Common gas cooker size
Digging hole size: 680*350mm; external size: 748*405*148mm
Digging hole size: 708×388R80mm; external size: 760×460×80mm
Digging hole size: 674*355mm; external size: 740*430 *140mm
Dig hole size: 635×350mm; external dimension: 720×400mm
Dig hole size: 645×340×R30mm; external dimension: 710×400×165mm
Dig hole size: 635×350mm; external dimension: 720×400×125mm
Countertop stove size
Double-burner tempered glass countertop general size 72X40cm
Stainless steel countertop 71X40cm
Single-burner tempered glass countertop general size 33X43cm
Stainless steel countertop 37X28cm
Inlaid stove size
Double-burner tempered glass countertop general Size 73X41cm
Stainless steel countertop general size 74X43cm
Single stove tempered glass countertop general size 37X28cm
Gas cooker and gas water heater to connect the gas hose ID is generally ∮9.5, if the gas hose through the countertops (generally marble, artificial marble) or a large kitchen cabinets, then the opening is generally 20-25mm In addition to installing gas bellows users to open the countertop hole is generally 25-30mm.