LQ-300K+II automatic paper cutting method;
1. Turn off the printer.
2. Press and hold the "paper cutting key" and "paper feeding key" at the same time, then turn on the printer power supply, press and hold for about 5s, then release the print head and the printer will print a page of text. Find "automatic paper cutting" in the printed content to see if it is on or off. If so, go to step 3. If it is turned on, it means that automatic paper cutting has been turned on, and step 5 is executed.
3. Press the paper cutting key twice, and the two on the right side of the font light are always on.
4. Press the line feed key twice, and the font light is always on in the middle.
5. Close and complete the setup.
Then, please check whether the paper size you set is exactly the same as the actual continuous paper size. If not, please choose according to the actual paper size. If the relevant paper size cannot be found, please set it as follows:
1. Custom paper:
If your computer is Windows XP:
Click "Start->" in the lower left corner of the computer; "printers and fax machines"->; "file"->; "Server Properties", check "Create a new format", enter the name of the custom size (such as 1234) in "Table Name", and enter "Width" and "Height" (height = number of continuous paper holes *0.5*2.54CM) according to the actual size of the paper. There is no need to modify the printer area margin. Click Save Format to complete the paper customization.
If your computer is Windows 7:
Click "Start->" in the lower left corner of the computer; "Equipment and Printer", click the printer icon with the left mouse button, select "Server Properties" in the upper menu bar, check "New Table", enter a name with a custom size (such as 1234) in "Table Name", and respectively enter "Width" and "Height" (height = number of consecutive holes * 0.5 *) according to the actual paper size. There is no need to modify the printer area margin. Click Save Format to complete the paper customization.
2. Drive settings:
Right-click the printer icon and select Printing Preferences-> "layout"->; "Advanced", in "Paper Specification", select the name of the custom size "1234".
3. Application software settings:
Please "set the page" according to the above customized size in the application software you are using. If the printed results still have the same problem. It is recommended that you test in general software such as WORD. If the printed result is correct, there is something wrong with your application software. It is recommended to check your software settings or contact your software developer.
If the above scheme still can't solve your problem, please log in to Epson official website "Online Engineer": http://219.232.55.146/portal/epson to communicate with Epson engineers in real time so as to solve the problem in time. (Epson "Online Engineer" service hours: 9: 00- 18: 00 from Monday to Friday)