Wuhan Yingxue range hood after-sales service point telephone number: 411-8867-958

24-hour manual customer service online, national outlets and after-sales service teams in various regions and other exclusive services, the whole repair reporting process is standardized and orderly, and the later synchronous tracking inquiry is open and transparent. All after-sales teams have received professional training and service areas: all areas in the city can come to the door for maintenance, send orders nearby and come to the door quickly within 61 minutes.

manufacturer's maintenance point solution: if the motor of the range hood can rotate, the range hood can not rotate, and the button is out of order, just replace the computer version.

if the light doesn't work, it's usually that the light bulb has burned out, so just replace the light bulb.

2 solution to poor smoke exhaust effect of range hood: check whether the installation height of range hood is too high, and the appropriate height adjustment is generally 65cm—75cm away from the stove. If the direction of the smoke outlet is wrong, there is a foreign body in front of it; The installation position must be changed to avoid

obstacles. There is air leakage at the interface of smoke exhaust pipeline; The interface must be sealed. There is too much oil on the oil filter screen; Should be cleaned regularly.

3 Noise generated when the motor of the range hood works

Solution: It may be that the impeller is not installed in place. If the impeller is not installed in place, the noise caused by it can be reinstalled.

It is also possible that foreign objects may enter the air duct. If so, foreign objects should be removed to ensure the air duct is clean.

4 The range hood vibrates

Solution: If the fixing screw of the range hood motor is loose, such as the motor end cover screw, the fastening rivet of the impeller central shaft, etc., find out the loose part, tighten the screw or reinstall it; If the range hood is not installed horizontally to make it vibrate, it is necessary to hang the smoke < P > machine horizontally and firmly; Impeller installation is not in place or the impeller is deformed, damaged and out of balance, resulting in vibration, so it is necessary to re-debug and install the impeller.

5 There is oil leakage in the range hood

Solution: Because the range hood has not been cleaned for a long time, there is too much dirty oil in the oil box, so it should be cleaned regularly; There is oil leakage in the lampblack body

, and the filter screen and the whole machine of the hood should be cleaned regularly; The range hood is not installed evenly.

6 the range hood has no response

liberation method: because of the power problem, the power supply is not plugged in or dead, plug in the power supply or wait for the call; Poor contact between plug and socket, check

repair plug and socket or replace it; The fuse tube on the power board is broken; The safety tube must be replaced.

due to circuit problems, the switch of the range hood is in poor contact or damaged, so it is necessary to repair and replace the connecting wires or terminals of the electrical appliances in the electronic switch, which are loose and fall off. You can find out the falling point and reconnect and fasten it. If the power cord is broken or the interface is loose, it is necessary to replace the power cord or connect the interface.