However, the state has set standards for the height of tables and chairs. Among them, the height size standard of dining table furniture can be 700mm, 720mm, 740mm and 760mm; The height of chairs and stools can be 400mm, 420mm and 440 mm. In addition, the standard size of tables and chairs is stipulated, and the height difference between tables and chairs should be controlled within the range of 280 ~ 320 mm.
Square table size table size specification
1. Dining table for 10 people.
For a large family of 10 people, the size of the dining table can be 2400mm long, 1200mm wide and still 750mm high, which is suitable for the atmosphere without wasting too much space, so it is the standard dining table for 10 people.
2. A table for six people.
Generally, it is 1200mm- 1500mm long, 800mm-900mm wide and 750mm high. Namely 1200*800 or 1400*800 or 1500*900. Mainly based on 1400*800, which means it doesn't take up too much space and is more suitable for a family of 6 people.
3. A table for four people.
You can choose a rectangle 800*600 or a square 600*600, both of which are 750mm high. Relatively speaking, a square is more suitable. The size of the dining table for 8 people is 2000* 1200, and the height is 750 mm
4. Table size specification Round table size
Generally divided into eight categories. According to the standard size of dining tables, the diameters of these eight dining tables are 500mm for two people, 800mm for three people, 900mm for four people, 5 people 1 100mm, and 8 people1100-1250mm.
Dimensions of common furniture in restaurants:
L, square table
760mm x 760mm square table and 1070mm x 760mm long square table are commonly used table sizes. If the chair can reach into the bottom of the table, even in a small corner, you can put a table for six. When eating, just pull out some tables you need. The width of the dining table of 760mm is the standard size, at least not less than 700mm, otherwise the table will touch the other's feet because it is too narrow when sitting. The feet of the dining table should shrink in the middle. It would be inconvenient to arrange four feet at four corners. Generally, the height of the table is 7 10mm, the height of the chair is 4 15 mm, and the desktop is low, so you can clearly see the food on the table when eating.
2. Round tables
If the furniture in the living room and dining room is square or rectangular, the diameter of the round table can be increased from150 mm. In ordinary small and medium-sized units, if the dining table with the diameter of 1200mm is used, it will often appear too large. You can customize a round table with a diameter of 1 140mm, which can also seat 8-9 people, but it looks more spacious. If you use a dining table with a diameter of more than 900mm, you can sit a lot of people, but it is not advisable to put too many fixed chairs. For example, a dining table with a diameter of 1200mm and eight chairs is very crowded. Can hold 4-6 chairs. Use folding chairs when there are many people, which can be stored in the storage room.
3. Open and close tables
The opening and closing table, also called the extended dining table, can be changed from a 900mm square table or round table with a diameter of 1050mm to a long table or oval table with a diameter of 1350- 1700mm (various sizes), which is very suitable for small and medium-sized units to use at ordinary times and to use with guests for a long time. This kind of dining table has been popular since15th century and has a history of 500 years. This is a very popular dining table. However, attention should be paid to its mechanical structure, which should be smooth and smooth during the meeting and easy to align and close when closing. With a round dining table, you can get better space adjustment. Another advantage of dining at a round table is that the number of people sitting is more tolerant. As long as the chair is pulled away from the desktop, you can sit on the fire more, and there is no disadvantage that it is inconvenient to sit in the corner when the square table is used.
4. A table for six people.
140×70 cm is more suitable. This size is most suitable for rectangular and oval dining tables. Nowadays, the space of restaurants is generally rectangular, so square tables and round tables are rarely used. Rectangular tables for six people are the most common. If the family has a small population, you can buy some retractable tables to save space, which usually occupy a small area. It's practical to open them when visiting friends.
The distance between the dining table and the wall is about 80 cm.
This distance is the minimum distance including pulling out the chair to facilitate the diners to move. Most people still want to have a spacious space when eating, so they can go in and out at will, so if they are too close to the wall, eating will be uncomfortable.
6. The standard height of the dining table is about 72 cm.
This is the suitable height of the table. Generally, the height of the dining chair is 45 cm, which is more comfortable. At present, there are some differences in the height of dining chairs on the market. It's best to try them first to see if they are suitable for the height of the dining table.
How to determine the size of dining chair?
The dining chair is too high or too low, and people will feel uncomfortable when eating. If the dining chair is too high, such as 400-430mm, it will make your back ache (many imported dining chairs are 480mm). It is also not suitable for eating on the sofa. The height of the dining chair is generally around 4 10 mm, and the seat and backrest of the dining chair should be straight (2-3 is appropriate even if there is inclination). The cushion is about 20mm thick, and even the bottom plate is only 25mm thick. Some dining chairs are made of a 50 mm cushion with a snake-shaped slingshot under it. Sitting on this dining chair is not as comfortable as the chair mentioned above.
Does the family dining table have a standard size?
For the height and size of dining tables and chairs, the state has formulated standards. When a person sits on a desk and chair with a standard height and his feet flat on the ground, his thighs and calves are basically vertical; When the arm droops naturally, the upper arm is basically perpendicular to the forearm, and the height of the desktop just touches the plane of the forearm.
According to the different styles of the dining table, the size of the domestic dining table is also specified in detail. According to the standard, the standard height of dining table is between 750-790mm, while the height of dining chair is between 450-500 mm. The shape of domestic dining table is mainly square table and round table. In recent years, oval dining tables have become more and more popular.
Square dining table size: The size of the square dining table varies according to the number of seats. The size of the table for two is 700 * 850mm (length * width), the size of the table for four is 1350 * 850mm, and the size of the table for eight is 2250 * 850mm.
Consumers can choose the appropriate dining table size according to their own area when buying, but the width of the dining table should not be less than 700 mm, otherwise it is easy for family members to touch their feet because the dining table is too narrow.
Round dining table size: Round dining tables are generally divided into eight categories. According to the standard size of dining tables, the diameters of these eight dining tables are 500mm for two people, 800mm for three people, 900mm for four people, 5 people 1 100mm, and 6 people 1 100- 1250. General small and medium-sized apartment, if you use a dining table with a diameter of 1200mm, it is often too large. You can choose a round table with a diameter of 1 100mm, which will make the space look much more spacious.
Detail factors related to table size
When considering the size of the dining table, we should also consider the distance between the dining table and the wall. Generally, it is better to control it at about 80 cm, which is the minimum distance including pulling out the chair to facilitate the diners to move. Most people still want to have a spacious space when eating, and they can go in and out at will. If they are too close to the wall, they will be uncomfortable to eat, so consider this factor when choosing the size of the dining table.
After reading the above introduction, you will find that the size of the family dining table is mainly determined by the living room area and the family diners. Nanning Decoration Company warmly reminds consumers that it is suggested to increase the number of family meals on the basis of the actual number of families to meet the needs of relatives and friends when they go home for dinner. Of course, according to personal preferences and different styles of home improvement, you can choose different styles to achieve specific results.
How to choose a family dining table?
First, matters needing attention in purchasing solid wood dining table
1, solid wood dining table is not only a kind of dining table, there are many kinds of solid wood, different materials of solid wood have different characteristics, of course, there are advantages and disadvantages. So what kind of solid wood dining table is good? This requires us to have a certain understanding of the materials of different solid wood. Solid wood dining table, as furniture with special purpose in restaurant environment, should be made of materials with corrosion resistance, wear resistance, easy cleaning and heat resistance.
2. Before buying a solid wood dining table, we need to determine how big our dining area is, so as to better determine the size and shape of the solid wood dining table. The solid wood long dining table needs a larger dining area, while the round dining table feels relatively small. Irregular smaller, more suitable for two people, less folding requirements, more flexible.
3. When purchasing the solid wood dining table, we should also combine the overall style of our restaurant decoration to decide. Solid wood furniture is not as complicated as other materials because of its particularity. Original ecological and natural solid wood furniture has always been people's first choice. Therefore, in the choice of solid wood dining table, we should also choose according to our own living environment.
Second, the main points of marble dining table purchase
Marble furniture has become the favorite of many families because of its special texture and cool texture. Especially in the hot summer, marble furniture can bring extraordinary coolness to the home, which is refreshing. Many people prefer marble dining tables, so what is the correct way to buy marble dining tables?
1, choose a good grade
According to the allowable deviation of specifications and dimensions, allowable tolerance of flatness and angle, appearance quality and surface smoothness. Marble boards are divided into three grades: excellent products, first-class products and qualified products; The grading identification of marble plates is mainly identified by the detection of instruments and measuring tools.
2, check the appearance quality
The appearance of different grades of marble plates is different. Because marble is naturally formed, defects are inevitable. At the same time, the advantages and disadvantages of processing equipment and measuring tools are also the reasons for plate defects. Some plates are not full (warped or sunken) and have defects (cracks, sand holes, spots, etc.). ), and the specifications are different (such as lack of edges and corners, wrong plates). According to national standards, all grades of marble plates are allowed to have certain defects, but the superior products are not so obvious.
3. Choose the hue of the pattern
Marble plate is rich in color, diverse in color and different in pattern, which is the precious charm of marble plate. The basic consistency of color tone, small color difference and beautiful pattern are the concrete manifestations of excellent varieties, otherwise the decorative effect will be seriously affected.
4. Test the surface gloss.
The surface gloss of marble board will greatly affect the decorative effect. Generally speaking, the polished surface of high-quality marble plate should have a mirror-like luster, which can clearly reflect the scenery. However, due to the different chemical composition of different quality marble, even the products of the same grade will have great differences in gloss. Of course, there will be some differences in the surface gloss of different grades of the same material. In addition, the strength and water absorption of marble slab are also important indexes to evaluate the quality of marble.
Third, the glass dining table purchase precautions
In recent years, the glass dining table has gradually become popular, and it is especially favored by people because of its clear and transparent, crystal-clear and lovely, colorful quality. However, the glass itself is fragile, hard, afraid of heat and other bad properties will also pose a certain potential threat, so be careful when choosing a glass dining table. The following Nanning decoration company will introduce some methods of purchasing glass dining tables.
1, look at the appearance
Glass dining table must use tempered glass. The strength of tempered glass is several times higher than ordinary glass, the bending strength is 3-5 times higher than ordinary glass, and the impact strength is 5- 10 times higher than ordinary glass. After being destroyed, the tempered glass is small and has no acute angle, which ensures its safety. The smoothness, transparency and smoothness of appearance also reflect the quality of glass. If you put white paper with words on it at the bottom of the glass, can you clearly see the handwriting on the front to judge its transparency? If you touch the countertop by hand, there should be no obvious hysteresis, so the glass will be smooth and flawless.
2, firmness
The table welding of steel-wood underframe or bracket shall be free of desoldering, virtual welding and cracks, and the connection parts of screws or rivets shall be free of looseness, and the steel pipe frame shall be firmly connected with solid wood feet. Dining chairs, in particular, are frequently used, so attention should be paid to the materials and splicing methods of chairs when purchasing. Generally speaking, the traditional tenon-mortise structure is more reliable. Then dining chairs made of elm and beech are more durable. This point must be paid attention to when choosing to ensure the durability of the glass dining table.
3. Need humanized design.
In some details, we should also pay attention to humanized treatment: the edge sealing and polishing of the desktop should be straight without obtuse angle, and the surface of the glass dining table should be free of scratches and missing corners. If consumers need it, they can also consider the combination changes of dining table, table turntable and storage space.
4, size standard
Industry standards stipulate that the height of the dining table is 680 mm-760 mm; The height of the dining chair is 400 -440 mm; The height of the soft seat is 400 mm -460 mm, and the width in the armrest of the armchair is equal to or greater than 460 mm. Use a steel tape or steel ruler with an error of less than 0.6 mm per meter to measure the test pieces placed on the inspection table or on the flat ground. These standards can be used as a reference for purchasing glass dining tables.