The floor glue in the dance studio can't turn, which may be due to the deformation and unevenness of the floor glue, which leads to the increase of friction force, so it can't turn.

If the floor of the dance floor is not flat and clean during installation, it may cause some bubbles, which will seriously affect the normal use of the floor. We all know that the floor is uneven, so a certain space will be reserved during installation, and there will be air. If it is affected by some pressure during application, it will cause some wear or deformation, so this aspect is very important.

For uneven ground installation, the local compressive capacity of the rubber will increase during the application process, which will cause some consequences of warping. Therefore, in order to prolong the service life of the rubber, it is necessary to do a good job in all aspects of the installation of the rubber.

Precautions for floor glue laying in the dance studio

1. Check the ground condition, thoroughly clean the ground, and ensure that the ground is flat and clean. If the ground is not cleaned and leveled, it is easy to have the glue become warped and uneven after laying.

2. If cutting is needed in the paving process, the joints should be cut neatly and butted well, so as to increase the stability of the adhesive and keep it from moving.

3. According to the ground conditions, choose the thickness of dance floor glue. 4mm and 5mm dance floor glue is suitable for cement floor and ceramic tile floor. 3mm, 3.5mm and 4mm floor adhesives are suitable for floors, and different thicknesses of the paved dance floor adhesives have different shock absorption and buffering capacities. 4. When paving the dance floor glue, measure the indoor area in advance, and then cut the floor glue to reduce waste and construction cost.

the above content reference: Baidu encyclopedia-dance floor glue