Wall tiles press floor tiles, in the renovation, we have to paste the wall tiles first, and wall tiles the bottom row to reserve enough distance, from the second row up to paste, wait until the wall tiles paving is completed, and then from the inside to the outside of the paving floor tiles, and then finally according to the size of the reserved, cut a piece of tile of the right size to lay to the wall of the bottom row. Washroom leakage with this not much to do with the washroom after brushing waterproofing, master tiles before the bathroom floor to do a protective layer, our side of the construction method first paste the wall and then paste the ground, because the washroom floor has a slope first paste the wall tiles to ensure that the wall tiles and floor tiles of the integrity of the tiles! It is also convenient to construct more beautiful and practical!

The construction of the wall or wall pressure paving method does not make much difference, depending on which method you like, as for the waterproof effect of how it is, paving good tiles, need to make seam waterproof construction of the tiles, waterproofing seams are not well handled, what paving tiles of the method is useless, so that no matter whether the wall pressure ground or ground pressure wall are the same.

In fact, the practice of wall pressure is more complex, leaving the bottom row is not posted, in order to wall pressure on the structure of the floor tiles first restroom tiles first paste good, and then the bottom of the wall paste! This makes the corners of the wall tightly, you can do effective waterproof and beautiful. In fact, in other places, the wall presses the floor or the floor presses the wall effect is poor read, but for the kitchen, bathroom, such as more moisture, it is easy to enter the ground through the gaps, the advantage of the wall presses the floor is very obvious.

Simply put is the first paste wall tiles, and so the wall tiles paste a good wall tiles press wall tiles paste a good, this is quick and easy to do, but the ground pressure wall has a criticism, that is, the gap between the floor tiles and wall tiles is visible, even if you do the waterproofing, the water will still slowly penetrate, easy to lead to accelerated aging of waterproof layer. For the floor pressure wall, this paving method is from the bottom to the top, the reason for this paving is because the tile paste is not easy to appear hollow drum! The overall appearance also looks relatively beautiful viewpoint!

With the passage of time, it is easy to accumulate dust, we can all see that the gap between its floor tiles and wall tiles is often very large, so that, if in the bathroom, this will seriously affect the effect of waterproofing! It will also affect the aesthetic degree!