First, install the sub-switch kitchen ceiling lamp. When installing, if there is only one main switch and several lights are on and off, it is impossible to choose the brightness of the lights, which will waste electricity. Using the sub-control switch, you can choose to turn on several lights at any time. If there is an aisle in front of the kitchen, it's best to install a switch at the end of the aisle, so that you can turn off the power directly after entering the door without going back to the door to turn off the lights.
Second, the lighting control system When installing the kitchen ceiling lamp, the lighting system should be adjustable, that is, when the light is dim or dazzling, it can be adjusted to make people feel more comfortable and comfortable. The color temperature of the lamp should be roughly the same as that of the living room. Do not install a single light source in the center. For kitchen lighting, a multi-layer lighting system consisting of different lamps and light sources should be installed in the kitchen.
Third, the installation location When installing the kitchen ceiling lamp, the location selection is also very important. Straight incandescent lamp or fluorescent lamp should be installed in front of the cabinet. In this way, a part of the light from the lamp is guided to the tailgate, then reflected to the console, and then toward the center of the space. If the space is high enough, a transparent or translucent chandelier can be installed on the ceiling as a light source.
Fourth, the most important thing in the selection and maintenance of chandeliers is to be firm. You can pull it by hand, feel it, and see if the bottom cover of a solid lampshade should be close to the ceiling and not shake. If it is a chandelier, there will be wires extending from the top of the lamp to the lamp holder. It should be noted that this thread cannot be tightened. It should be loosely wound around the pull rod, otherwise the long line is tight and it is easy to have an accident. Secondly, carefully check whether there are wires exposed. Finally, if you choose ceiling lamps, many ceiling lamps have scratch-resistant films. Need to be clear after installation. Actually, there is a little trick. You can blow this film with a hair dryer and then expose it. It is easy to clean.
The above are some tips for installing kitchen ceiling lamps, hoping to help!
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~