Current location - Recipe Complete Network - Catering training - What is integrated ceiling?
What is integrated ceiling?

Integrated ceiling is a combination of HUV metal square plate and electrical appliances. It is divided into buckling module, heating module, lighting module, and air-exchange module. Simple installation, flexible arrangement, easy maintenance, become the mainstream of the bathroom, kitchen ceiling.

Integrated ceiling is generally used in the kitchen, bathroom and balcony, with the continuous development and growth of the industry, at this stage has been to the whole room integrated home ceiling direction, such as: living room, bedroom, study, dining room, aisle, clubs, KTV, commercial decoration and other areas of development.

Office integrated ceiling decoration effect

Integrated ceiling from the traditional single combination of ceiling evolution to integrated home ceiling, living room ceiling, whole room custom ceiling, full quality control ceiling, 3D dynamic ceiling, panoramic roof, whole-house ceiling, duplicate ceiling, intelligent ceiling, etc., combined with the development of multi-industry areas, to achieve one-stop decorative solutions, so that the integrated ceiling industry has a new innovative concept, the development is getting better and better.

Simply put, the integrated ceiling, also known as the whole ceiling, the whole ceiling, is the ceiling module and electrical module, are made into standard specifications of the combinable module, the installation of integrated together only. But never underestimate this "integrated" behavior, this "integrated" features are very obvious --

Pretty "top! "

Top: Different from the previous kitchen and bathroom ceiling on the hard installation of bath or ventilation fan or lighting effect, integrated ceiling installation is no longer seen after the completion of the combination of hard, but the top of the beautiful and coordinated modeling.

Functional "top": independent heating lamp, independent lighting, independent ventilation fan, can be reasonably arranged to install the position, to overcome the traditional bath heater installation position of the embarrassment, can be installed in the shower area directly above the heating lamp, lighting installed in the middle of the room or the position of the sink, ventilation fan installed in the toilet directly above, so that each of the functions can be installed on the top of the ceiling. Thus, each function can be placed in the most necessary space location.

Durable "top": the traditional bath products will be a lot of functions hard to combine into one, and the use of the bottom shell wrapped in the form. So in the process of use, due to the very high power, the machine temperature also rises, thus reducing the life of the components. And after the integrated ceiling each function module is split, the open split installation mounting method is used, which improves the life of the electrical components by more than 3 times.

Functional optimization

The core concept of integrated ceiling is "modularization, self-assembly". It means that a product is divided into several modules, and then each module is developed individually to optimize its function to the maximum extent, and then combined and integrated into a new system. Heating module, lighting module, ventilation module, can be reasonably arranged, every detail is carefully designed, professionally installed and completed, and its line arrangement is also after strict design testing, very humane. Then the integrated ceiling functions are independent, according to the actual needs to install the location and number of warming lamps, heating range is large and uniform, three carbon fiber warming lamps can achieve the effect of four warming lamps of the bath bar, green environmental protection and energy saving.

And the integrated ceiling has high upgrading performance and strong personalized customization function

Ceiling process

From laminating board --- roll coating board ---- phantom color process ---- microcrystalline process, constantly upgrading and innovating, advancing the rapid development of the whole ceiling industry.

Designed for multi-functionality

Control of indoor air. Because of its modular technology concept, the "heating module" of the integrated ceiling has a lot of space for application research and development. Not only does it effectively regulate the indoor air temperature, but by safely and conveniently controlling the circulation, the temperature of the entire space is uniformly raised. This is completely different from the defects of single-point heating in the bath.

Bid farewell to hot head and cold feet. Integrated ceiling "heating module" in the design according to ergonomics using linear design scheme, warming lamp large distance, "a" type arrangement, reasonable dispersion of heat, to achieve uniform heating of the bathroom space, thus effectively avoiding the phenomenon of hot head and cold feet.

High security price

Can be installed according to the actual needs of the location and number of lamps, the traditional ceiling are using bath heating, it has great limitations, heating location is too centralized, the integrated ceiling overcomes these shortcomings, the heating range is large, and uniform, three lamps can be achieved with four lamps of the effect of the bath, green energy saving. The use of high-quality aluminum-magnesium manganese alloy materials, no harmful substances, fire, moisture, aging resistance. Eliminate the use of wood keel (wood keel is easy to moisture, mold) unsafe factors.

Integrated ceiling unit price is higher than the traditional ceiling, but it is important to know that it is processed from high-quality aluminum, most of the traditional ceiling is made of plastic processing, and must be used in wood keel. Integrated ceiling life of up to 50 years, while the life of the traditional ceiling is only about 10 years (prone to aging).

Personalization

This is an era full of personalized demand, singing ceiling music integrated ceiling and so on will be on the personalized demand for an epitome of the era. Music ceiling to the audio function as the core development, the first use of high-power integrated digital amplifier technology applications, to create a higher sound quality effect. In addition to audio, the product also increased the video viewing, album browsing, e-books, recording messages, resource management, entertainment games and many other practical additional features. The product adopts 7-inch large touch screen color display, showing simple, generous, fashionable style, large-capacity expansion SD card, you can add and update your favorite music, with a wireless infrared remote control, so you can choose your favorite music anytime, anywhere, want to listen to. High-quality products, high level of craftsmanship, high-grade modeling, very much in line with the consumer's pursuit of family leisure and high quality of life standards.

Contrast ceiling

Purchase notes

(a) plate

The common aluminum buckle plate, there are three kinds of materials: laminated plate, roll-coated plate, oxidized plate, and the unity of these three materials is formed by different treatments on the surface of the aluminum substrate. Inferior aluminum ceiling using recycled garbage aluminum, not only can not do thin, and because the source of the material is unknown, it is likely to produce radiation affecting health, more likely to produce rust and surface layer flaking and other phenomena. Three kinds of materials, low-end products laminating plate laminating materials as well as mid-range products roller coated plate coating, it is more likely to be unscrupulous manufacturers to use non-environmental low-quality laminating layer, coating, not only quickly faded, flaking, and will be more in the process of releasing hazardous gases, resulting in the "decoration of disease". There are many manufacturers began to use magnesium-aluminum-manganese alloy and other new materials stamping ceiling fastening, gradually eliminating the film fastening.

(2) Accessories

When shopping, we must pay attention to the auxiliary materials (the main frame part of the installation, including triangular keel, main keel, boom, hanging parts, etc.). Auxiliary materials relative to the integrated ceiling, equivalent to the building's foundation and beams and columns, so that a lot of ceiling installation less than two years, due to auxiliary materials

rust corrosion or can not bear the weight of the ceiling caused by deformation, sinking or even collapse and other phenomena. Therefore, to choose all-metal installation framework, not only the choice of high-quality steel production of a variety of accessories, but also all the accessories on the brush corrosion-resistant coating, so that the overall framework presents a metallic luster.

(C) Electrical appliances

There are many integrated ceiling manufacturers who do not have the production capacity of electrical appliances, and they put together low-quality electrical appliances in the concept of integration to form a "ceiling + electrical appliances" low-priced packaged tactical sales. Therefore, consumers should judge whether the brand has the production capacity and quality assurance of electrical appliances, and it is best to choose those brands and enterprises with independent innovation capability.

(4)Installation

Integrated ceiling design, installation is the key integrated ceiling, three parts of the material seven parts installed. We can buy in every brand store, are just cold metal materials, and these materials only through professional designers, installers, can be transformed into integrated ceiling in line with the overall style of home decoration.

Ceiling installation

Edit

Installation steps

1, accurate measurement of the installation area, ready for installation.

2, install the edge line.

3, play the expansion screws and nails, hang the hanging rod.

4, install hooks, ceiling mounted light steel keel.

5, the installation of a good hanging piece of triangular keel tightly attached to the light steel keel vertical direction under the light steel keel.

6, the buckle plate pressed into the triangle keel seam, to determine each other perpendicular.

7, installation of electrical appliances.

8, calibration adjustment

Specific operation

Integrated ceiling installation of the correct or not directly related to the service life of the integrated ceiling and the integrated ceiling of the use of safety, the following installation engineers to teach you how to carry out the installation of the integrated ceiling:

Preparation

Pre-installation to ensure that before the kitchen needs to be installed before the ceiling of the space without leakage, no cracks, to ensure that the plumbing and electrical installation. Then also check whether the installation surface has enough strength, if not meet the requirements should take reinforcing measures; according to the height of the pre-installed electrical appliances required to calculate the installation of the ceiling, the height of the remaining space in the room, in order to facilitate the installation of the edge line.

In order to meet the various needs of the installation process, before the installation we also need to prepare all the tools: tape measure (measuring length and height), transparent water pipe (wall level measurement), ink bucket (wall line), equilateral right-angled triangle ruler (edges, such as beveled edges of cutting and measuring), scissors (material trimming of the subtle), cutter (cutting the keel, edging strips), grinder (material trimming), electric hammer (wall edges of the), and so on. Trimming), electric hammer (wall drilling), pistol drill (keel and other materials, drilling), diamond drill bit (tiles wall drilling), steel cutter (grinding the raw edge of the edge strip), wood hammer (leveling fastening), hammer (knocking nails), 10 inch \ 8 inch wrench (tighten the nut), steel pliers (clamping materials), twist drill bit (materials, drilling), impact drills (wall drilling), a word / Phillips screwdriver (loosening screws), terminal board (connecting the power), the power supply board (connecting the power supply) ), terminal board (connecting the power supply), test pen (test charged or not), saw bow, saw blade (cutting material fine trimming), wallpaper knife (fine trimming) ......

The installation of the edge line will determine the installation height and level of the ceiling

In the case of tiles to the top of the case of the wall on one side to take off the ground 230-240cm high point, with a transparent water pipe fixed wall on the other side of the overlap point and then spring line, determine the location of the holes after drilling with diamond drill.

If the height of the ceiling can be used to determine the height of the tiles, then you can use the wooden bar is 3cm thickness * length of the wall, with steel nails to fix the wooden bar on the wall above the tiles, according to determine the height of the installation of the wooden bar with the bucket to pop out the level of installation of the edge of the bar.

The edge of the strip according to the actual length of the intercept, the two ends of the equilateral right-angle triangle ruler to take 45 ° angle and then saw 45 ° with a hacksaw blade (Note: Because the wall angle is not necessarily 90 ° so should be in accordance with the actual angle to intercept), will intercept the finished edge of the strip with a steel file to grind off the burr, the edge of the strip and the wall is fixed, the spacing of screws should be in the 30 ~ 40 cm, the cut corners be sure to be aligned can not be a gap.

Six screws will bear the weight of the entire integrated ceiling

First of all, measure the size of the ceiling, drilling and screwing into the expansion pipe screws, and to ensure that the ceiling and the roof of the sandwich between the height of not less than 25cm (Note: Screws connected to the ceiling for the installation of the entire ceiling of the benchmark, screws must be perpendicular to the ceiling, and fastened securely, screws must be kept parallel. In general the top of only six screws, you can make the whole ceiling is very solid.)

Next, without affecting the installation of electrical appliances, take an average of six points in the ceiling and then use an electric hammer to punch holes.

Then measure the distance from the top to the corner line, intercept and the actual distance short 8-10cm screw, screw a nut on one side and then screw the expansion screws. The screw exceeds the expansion screw by about 3mm. Screw in the nut on the other side of the screw, put on the main keel suspension, screw in another nut in order to fix the main keel suspension, and then tap the expansion screw and screw connection into the punched hole. Finally, the big ceiling and 6mm diameter screw connection, we first screw the nut into the screw, and then set into the big pendant, and then screw the nut, and so on down the line.

The keel installation

First of all, the main keel is connected to the large hanging installation, the main keel will be stuck in the large hanging, according to the space size to select and intercept the main keel required. After the main keel is stuck into the main keel should be checked whether the installed main keel is parallel, if not parallel should be adjusted in time.

The second is the connection of the triangle keel and the main keel in accordance with the number of roots of the main keel, the triangle lifting piece set into the triangle keel, the triangle lifting piece in turn fixed in the main keel, and pay attention to the spacing between the triangle keel adjusted to 300mm after fixed.

Triangle keel and the main keel connection method is: according to the actual installation length minus 5mm to intercept the required triangle keel. Put the triangular lifting piece into the triangular keel, and then snap the triangular lifting piece onto the main keel. The same main keel on the triangular keel pendant, card should be opposite, so that there is easy to install the buckle plate when the triangular keel will not swing back and forth.

After the main keel and the triangle keel are connected, the distance between the triangle keel will be adjusted to 30cm, in order to install the buckled plate and electrical appliances smoothly. Generally at the same time, pay attention to adjust the level of the keel, if the kitchen needs to install a hood, you can line up the outlet pipe before the buckle plate.

Finally, the triangle keel and triangle keel connection

First insert the connector has been fixed triangle keel, and then intercept the required length to insert the other end of the connector. This step requires attention is to connect the triangle keel with the connector should be interspersed with the connection, otherwise it will cause sagging resulting in uneven heights.

Snapboard installation

The keel is built, the hood port is reserved, then the installation of the snapboard:

First of all the four sides of the snapboard membrane lift up, but do not have to completely tear off, so that there is easy to follow the membrane in the same direction as the arrow installation. Installation of fasteners should wear good white gloves. The first row of buckled plate installation should be considered before the possibility of cutting, cutting as much as possible to consider the overall beauty and symmetry of the two sides, with a hobby knife to cut the side of the wall, because of the consideration of the flatness of the wall, it is required around the buckled plate should be smaller than the actual size of the 1mm. cutting method: with a hobby knife and ruler engraved more than 5 times, 18mm high folded edges with scissors to cut off the cut at an angle of 90 °, with the hand to repeatedly folded 3-5 times. . Card in the triangular keel, cut surface frame on the edge of the strip and pull out the corner of the strip will be fastened to the buckle plate. And so on to complete the first row of buckle plate installation. Be sure to control the gap between the first row of fasteners, because the subsequent installation of fasteners all depends on the installation of the first row.

Installation of fasteners should be done when the spacing of the fasteners for 0, the corners of the fasteners into a "cross" shape, the height of the fasteners should be consistent.

Electrical appliances are heavier than the buckle plate, so you need to machine screws to be fixed

Before installing electrical appliances, be sure to leave the required height of electrical appliances.

According to the design drawings, confirm the exact location of the host installation, then start to install the electrical equipment.

First of all, one side of the circlip should be inserted into the round hole on the mounting rectangular hole circlip of the box, aligned with the round hole on the appliance box, and inserted and locked with a 3*6 machine screw. Next, put the mounted box on the keel, and the opening slots of the four circlips aligned with the triangular keel in turn, so that the electrical box is very firmly locked on the triangular keel.

Then the power cord is connected. Each host has a corresponding junction box, open the junction box, according to the corresponding function according to the wiring label for connection, L for the function line, N for the zero line, the two-color line for the grounding line, install the switch, power test, meet the requirements of the cover junction box.

Check whether the installation of the buckle plate is smooth, whether the electrical appliances can be used normally

After the end of the above five steps, the installation of the integrated ceiling is basically completed, and finally, in order to ensure the safety and functionality of the integrated ceiling, the next step is to carry out the installation of the self-test.

First of all, we have to check whether the visual level of the corner installation is good or not, so that the 90-degree angle has no gap and no obvious distortion phenomenon. Then observe the overall flatness of the buckle plate and the gap between the buckle plate each other visually good or not.

The next check is the strength of the silk rod. We can remove a few pieces of buckling plate, check whether the distance between the silk rod is in line with the installation standards, and then pull the silk rod by hand with appropriate tension a few times to confirm whether there is loosening.

Then the check is electrical installation firm number. We can try to push the body of the appliance by hand with normal force to see whether the appliance will fall off from the triangular keel.

The last thing to test is whether the appliance functions properly. We can turn on the switch and observe whether the electrical appliances work normally; whether the position of the air exchange, heating module is reasonable; whether the sound is normal when the air exchange or air heating module is turned on, to be no obvious noise.

Precautions

To determine whether to integrate the ceiling and the form of integrated ceiling based on the height of the floor

The height of the floor of the home is very critical. If the floor height is very low, or even less than 2.5 meters, then it is not suitable for a large area of integrated ceiling, but can be integrated in a small range of local ceiling, such as hanging around the house in a circle of a dozen centimeters wide, 10 ~ 18 centimeters high secondary roof, hidden upward exposure of the light, while the middle part of the original high, available light blue paint paint the top, so that the top surface appears to be as high as the sky, but also enrich the top level. Or in a hidden part of the room for local integrated ceiling, can achieve the same effect. For the high room, you can freely choose the integrated ceiling and modeling, can be curved, round, square, shaped top, can also be divided into two or even more levels of integrated ceiling modeling, and can be used to reduce the height of the floor with a large area of integrated ceiling.

How to choose

Edit

Variety

There are already many varieties of buckled boards on the market, such as laminated boards, nano boards, roll-coated boards, sanded boards, etc. The roll-coated boards are directly baked into the top of the aluminum boards at a high temperature of 280 degrees, which are environmentally friendly and non-toxic (formaldehyde emission is one-fifteenth of national standards), and not easy to change color. The laminated board is glued to a layer of PUC film, one is not environmentally friendly (containing formaldehyde) two fast discoloration (two hours under the sun will change color), so it is best not to choose the laminated board.

How to identify the advantages and disadvantages of the buckle plate?

A, look: the surface of the poor-quality buckle plate looks uneven, and there will be particles. High-quality panels look very flat, the panel is very soft.

B, smell: use a lighter to burn a corner of the poor quality board, 30 seconds will burn, and there is an irritating odor of burning plastic, roll coating anti-oil smallpox even if it burns to yellow will not have an irritating odor.

C, touch: the temperature of the laminate board board surface is the temperature of the plastic, so it is higher, to warm up a little bit, the temperature of the roll-coated board surface is the temperature of the metal, to cool a little bit.

D, listen: hold the corner of the panel with a hand, gently knock the center of the panel, the laminating plate rattles muffled a little bit, the roll-coated plate rattles crisp a little bit.

E, scraping: the difference between good and bad roller-coated panels, poor roller-coated panels in the bending out there will be a slight cracking, scraping the surface layer of the hand will be scraped off, a good buckle board will not.

Substrate

(To light and flat) is not the thicker the better, there are a lot of people think that the thicker the better, in fact, thick is not necessarily good, the international standard of aluminum buckle plate is 0.5 ㎜, the aluminum plate is too thick to put together in the middle will have a black seam. Roller coated board is selected by the aluminum, magnesium, manganese three metal processing and become, containing magnesium higher about 1.3-1.8 percent used to increase the elasticity of the machine material in addition to manganese metal can increase the rigidity of the machine material, the content of about 0.1-0.3 between. Depends on the quality of the aluminum used how, poor material aluminum can only increase the thickness to protect the rigidity. And no toughness. So it is not thick is good. It is not good if you feel clattering when you shake it with your hand.

Surface coating, different areas with different buckles, the kitchen to choose anti-oil aluminum, while the bathroom can choose some more soft warm romantic a little bit of color, of course, the key to match with the overall style of your home, such as wall tiles, floor tiles, and the color of the cabinets with.

How to choose a brand: regular brand products board is generally a brand of protective film, metal ceiling side of the brand's steel seal, the back of the factory date, brand name and ISO9001 international quality system certification of the computer spray code, the small manufacturers of the products do not have these brand labeling, or more fuzzy.

Electrical appliances

The electrical appliances in the integrated ceiling industry, just like the automobile industry, are mainly assembled, and no integrated ceiling company has the ability to produce all the parts by itself.

Top ten brands

Integrated ceiling enterprises of different colors have entered the market one after another. The speed of development is unimaginable, and their integrated ceiling products are slowly accepted by the world. However, the development of an industry always tends to mature, and the market competition will become more and more intense, and in this new economic situation, the integrated ceiling enterprises should go wherever they want to go, and it has become a pressing and urgent problem to be solved.

In fact, the top ten brands of integrated ceiling change every year as the development of each enterprise is different.

Cleaning and maintenance

Edit

Easy cleaning is one of the advantages of integrated ceiling, and the market has seen the emergence of a large number of oil-resistant, self-cleaning integrated ceiling. Because of this, the whole integrated ceiling industry does not pay much attention to the later cleaning and maintenance of the integrated ceiling. However, the kitchen and other places will be more or less greasy and dirty, even if the integrated ceiling has a strong self-cleaning function, if it is not cleaned for a long time, it will affect the luster and beauty of the integrated ceiling.

Cleaning method

1, the kitchen integrated ceiling cleaning: usually the kitchen of the buckle plate we will choose to roller coating more, there are also a few with the drawing of the, that is also a roller coating in the better process, not many people in order to save money with the film plate, the former cleaning due to the kitchen, there will be grease and dirt, then with a small amount of detergent on it, but there should be sufficient water mixed in, to use a more soft and easy to use. Water into the water, to use a softer, more absorbent cloth to dip the water to scrub, the middle can be a little bit of force does not matter, but around the edges of the time, the force to be light. Special attention should be paid to is not hard cloth and detergent ball and so on, a scrub immediately will leave a lot of small silk stripes on the shiny panel, damage to the buckled plate, this time if it is roller coated okay, if it is not good for the film. There is also a point if you use the kind of cheap poor board, thick, then be careful, because it has a lot of iron content, not aluminum-magnesium alloy buckle plate, then see water, more prone to rust. When the first time with a water-soaked soft towel scrub, the second time and then scrub with water, open the window to ventilate the natural dry can be, if the ventilation of the sun is not good, then use the better quality of the towel paper over a good.

2, bathroom integrated ceiling cleaning: usually, no oil stains, it is good to take care of cleaning, often with a soft cloth with water scrubbing on the good, a month or two months, with the cleaning of the kitchen room method to do a cleaning can be, the corridor is similar to the bathroom, or to explain if it is the kind of poor board, then less cleaning and cleaning is good, usually with a soft cloth to get rid of dust on the Can, because the more cleaning, rust out the faster. Good board ten years no problem, your kind of cheap buckle board, only three years of opportunity, three years later will start from the side of the rotten rust out, to the end of the whole rotten, will be very ugly, will regret the year in order to cheap so dozens of dollars a square meter, it is not worth it.

Maintenance method

Metal alloy panel water resistance, scrub resistance is very strong. Daily cleanup available cleaning agent scrub, and then cleaned with water; kitchen board seam vulnerable to grease contamination, cleaning brush can be dipped in detergent scrubbing, and then net with water; attention to lighting circuits do not get wet.

Ceiling style

Edit

Natural leisure

Decorative boom began in the 90's, bringing people a multitude of decorative concepts, such as small gardens, culture stone decorative wall and rainbow stone and other decorative techniques have appeared in the reality of the design. Especially the use of red beech caused by a large number of "national decoration of a yellow" after the decorative phenomenon, close to nature, back to basics has become one of the goals that people pursue.

Bold and generous

Beginning in the mid-1990s, home design ideas have been greatly emancipated, people began to pursue a variety of design methods, including modernism, post-modernism and a series of more complete design concepts embodied in the interior design, this style is basically to cherry wood as the main woodworking button finish.

Soft style

At the end of the century, the beginning of this century, the pursuit of a smooth with a little luxury imitation club design began to appear, and then a large number of ordinary home decoration. This style is more emphasis on simpler but no loss of content in the form of decoration, gradually formed to black walnut as the main woodworking decorative panel style. In the middle, minimalism and minimalism began to surface and form the style.

Elegant style

This is a design style that appeared at the end of the last century at the beginning of this century, wallpaper as a decorative surface material, combined with oil mixing carpentry practices. This style emphasizes the proportion and color harmony. People began to put a wall of the upper part of the ceiling with the same color, and the wall with a light texture wallpaper. The whole style seems very elegant and serene, without a hint of flamboyance.

Urban style

Entering the 21st century, the housing reform and the emergence of many young first-time home buyers have given impetus to the creation of this style. Young people have just bought a house, many are shy, and this time the real estate is basically to rough housing (a style without basic decoration) is dominated by the financial constraints and forced to decorate the needs of the form to emphasize the "decoration" of the perception, which uses a lot of bright colors.

Fresh style

This is a kind of minimalism under the influence of the derivation of a "petty" flavor of the interior style. Especially with the emergence of many single people, this petty style appeared in a large number of various apartment decoration. There are no elderly and children in the apartment, so there is no need to consider many functional issues in the decoration, often emphasizing a casual and blandness. Light white gauze with a soft fabric sofa, then stacked with a bunch of various colors of pillows, formed a lazy atmosphere full of indoor space.

Chinese style

With the emergence of numerous modernisms, a vintage wind has emerged in the country, that is, the revival of Chinese decorative style. Chinese paintings, calligraphy and Ming and Qing dynasty furniture constitute the most important elements of Chinese design. However, the price of these reoccupied home furnishings is not expensive, becoming a major obstacle for enthusiasts.

Chinese nostalgia

Chinese style is more free, decorations can be green plants, cloth, decorative paintings, and different styles of lamps and lanterns. These decorations can be in a variety of styles, but the main decorations in the space are still traditional ornaments such as Chinese paintings, palace lamps and alabaster pottery. The number of these decorations is not large, but in the space can play a role in the finishing touch.

European classical style

European style mainly refers to the Western classical style. Emphasis on ornate decorations, strong colors, exquisite modeling to achieve a graceful and luxurious decorative effect.

Mediterranean style Enjoy the freshness of the blue sea and blue sky

Mediterranean style has a unique aesthetic characteristics. Generally choose natural soft colors, pay attention to space matching in the combination of design, make full use of space, set decoration and application in one, generous and natural in the combination of matching, exudes the ancient noble rustic atmosphere and cultural taste.

Southeast Asian style

Southeast Asian style of decoration, the material is more directly from the natural plant resources; wood, rattan, bamboo become the preferred choice of interior decoration.

American style

American country style attaches great importance to the natural comfort of life, fully revealing the rustic flavor. Classical with a little bit of casual, abandoned too much cumbersome and luxury, both the beautiful modeling of classicism and neoclassical functional equipment, both simple and bright, but also warm and comfortable.

Japanese style

Japanese style draws on the essence of Chinese and Tang Dynasty culture, space modeling is extremely simple, furniture furnishings to the center of the coffee table, the use of wooden components for the walls of the square geometric shapes, and the fine square wooden sliding doors and windows echo the spatial atmosphere of simplicity, elegance and softness. The space is simple, elegant and soft. It emphasizes on practical functions without adding more complicated decorations.

Fashion mix and match

The interior arrangement also tends to be both modern and practical, but also draw on the traditional characteristics of the decoration and furnishings in the dissolution of the ancient and modern Chinese and Western in one, everywhere to highlight the practical and casual.