1. Physical properties of the product: 1. Main ingredients: Appearance and properties of pure product: colorless or yellowish oily liquid, odorless, with specific gravity slightly higher than that of water, and flash point (℃): 126. 2. Fire emergency measures: this product is non-volatile, non-flammable, and belongs to non-flammable skin contact: take off the contaminated clothes and wash them with plenty of running water. Eye contact: Lift eyelids, rinse with running water or normal saline, and seek medical attention. 3. Fire extinguishing method: In case of accidental fire, when the fire is small, cover it with mulch. In case of fire, the container should be moved from the fire site to an open place as far as possible, and buried with sand or put out the fire with foam extinguisher. Spray water to keep the burning container cool until the fire goes out. Extinguishing agent: water, misty water, anti-soluble foam, dry powder, carbon dioxide, sand. 4. Precautions for transportation: Before transportation, check whether the packaging container is complete and sealed to ensure that the container does not leak, collapse, fall or be damaged during transportation. It is forbidden to mix with oxidants and acids. When shipping, it should be isolated from engine room, power supply and fire source. Highway transportation should follow the prescribed route. 5. Regulatory information: Regulations on Safety Management of Hazardous Chemicals (promulgated by the State Council on February 7, 1987), Detailed Rules for the Implementation of Regulations on Safety Management of Hazardous Chemicals (Hua Laofa [1992] No.677), and Provisions on Safe Use of Chemicals in Workplaces ([1996] 440.
2. Selection of environmental protection fuel production unit: 1. You should choose a qualified fuel production and sales unit. 2. You should sign a safety supply agreement and management agreement with the fuel supply enterprise that has obtained the production and sales license, and clarify the responsibilities of both parties. 3. You should use the fuel regularly inspected by the inspection organization recognized by the quality and technical supervision department. 3. Preparation before use: 1. Open the packing box and check the surface of the fuel tank for damage or leakage. 2. Check whether the fuel tank you use matches the stove. 3. Open the fuel core protection cover and check whether there is fuel leakage. If a small amount of fuel leaks from the fuel core, wipe the accumulated oil with a paper towel or rag before use. 4. Place the fuel tank in the center of the bottom of the furnace and adjust the height from the burner core to the furnace. It is suggested that a flame space of 2-75px should be left from the top of burner core to the bottom of cooker, so that the external flame can fully contact with the bottom of the pot to achieve the best firepower and heat. 5. In order to make the flame burning in the best state, it is necessary to adjust the core. Adjust the height of the combustion core until the flame is in a good combustion state.
4. Operating method being used: 1. Open the plastic cover and light it. Due to the safety of this product design, the flame will burn slowly until the required firepower. 2. Adjust the tank core through the "multi-purpose fire cover" to facilitate the adjustment of the required firepower. 3. The factory set the standard fire power of the tank core to meet the heat required for the buffet and most food heating and insulation. 4. The burning heat of the pull-up separated pot core (super firepower) is twice that of the standard firepower, which is suitable for high-temperature requirements such as cooking of small hot pot food, and the burning time is shortened accordingly. Combined pressing pot core (slow fire setting) can provide food heating and heat preservation more economically according to your needs. 5. Please use the "Multi-purpose Fire Extinguisher" and cover it with plastic cover in time, so as not to be affected by damp. 6. This product has no volatile waste, can be reused and is completely exhausted. Fuel Time Mode Usage: Usage (1): Pull up the cylinder core and separate it. Combustion time: less than standard time. Usage (2): Default factory setting. Combustion Time: Standard Time Usage (3): Press down the can core. Combustion time: higher than standard time. 7. In order to facilitate the use of fuel, our company specially designed and customized the safety igniter, which made the users safer and more comfortable in actual operation, fully reflected our company's attention to details and aimed at providing customers with the best service. The multifunctional fire extinguishing cover (with accessories) has beautiful appearance, reasonable structure and convenient use. You can adjust the fuel firepower at will and put out the fire. It is a good helper for catering service personnel in their daily work.
5. Cleaning after use: 1. After the burning core is extinguished, cleaning can only be carried out after the periphery of the tank is naturally cooled; 2. You can scrub the surface of the water tank with a detergent diluted with wet cotton cloth. Do not use abrasive or corrosive substances to clean the surface of the fuel tank; 3. Don't leave lemon, tomato juice, salt water, vinegar, coffee, milk and other things on the surface of the fuel tank; 4. In order to ensure the combustion quality, always wipe the surface of the oil tank with cotton cloth. 5. In order to ensure reuse next time, cover the protective cover of the tank core in time.
6. Precautions for product use: 1. This product is a safe and environment-friendly fuel; There is no pungent smell when burning. 2. The burning time is long, and the burning flame can be adjusted, so it is forbidden to use fire to adjust. 3. When igniting this product, it is best to use the special igniter equipped by the company to ignite. When igniting, aim the external flame of the ignition gun at the top of the tank core for 3-5 seconds. After igniting, the flame of the core will gradually increase and finally reach the required firepower. 4. When flameout, use the special fire extinguisher provided by the company. After the flameout, cover the fuel with the original blue plastic cover. Please do not use the blue plastic cover to directly turn off the flame, because the high temperature fuel core may cause plastic deformation, which will cause the fuel core and the plastic cover to stick together and affect the normal use next time. 5. The fuel core is made of high-activity cotton tube core, which has good oil absorption performance. At the same time, the fuel core will absorb water molecules in the air. When the fuel core is exposed to humid environment for a long time, it will absorb certain water molecules, which will lead to the phenomenon that the fuel core is not easy to ignite when it is ignited, and it will splash after it is ignited, especially in high temperature weather in summer, which is more likely to occur when it is used continuously for the second time. The solution is: avoid the burning core from being exposed to air for a long time, cover the original blue plastic cover in time after use and use it immediately; If it has absorbed water, gently pinch the wick with a napkin before lighting it, and then wait for 2 minutes before lighting it. 6. When there is oil on the surface of the oil tank, please wipe the accumulated oil with a paper towel or rag before use. When there is oil on the surface of the oil tank, it is forbidden to ignite. When there is oil accumulated on the surface of the oil tank, the surface temperature of the oil tank may be higher than the fuel ignition point due to heat accumulation and fire extinguishing during the combustion process, resulting in large-scale oil burning in the oil tank area. In this case, please cover the oil tank with a wet rag to put out the fire.
7. Safety management and responsibility system: 1. The legal representative or principal responsible person of the enterprise shall be responsible for the safety management of the unit. 2 enterprises should sign special safety management agreements with contracting, leasing or entrusting management units to fulfill their respective safety management responsibilities. 3. Enterprises should be equipped with fuel safety administrators to be responsible for the safety management of fuel equipment. 4. In case of personnel changes, pre-job training should be given to the newcomers, and they can only take up their posts after passing the examination. 5. The safety administrator should accept the safety education and professional training of fuel knowledge of the unit, and understand the basic common sense and safe use of fuel.
8. Description of transportation and storage: 1. Special tanks, oil tankers and iron drums should be used to transport environmentally friendly fuels, and aluminum drums or galvanized containers are prohibited. 2. The means of transport shall be clean and sanitary, and shall not be mixed, transported or stored with toxic, harmful, corrosive and odorous articles. 3. Handle with care. It is forbidden to throw, bump and shake violently, and keep away from heat sources and kindling. 4. Fire prevention, explosion prevention, anti-static and lightning protection are required during transportation, and exposure is not allowed. 5. The products should be stored in a cool, dry and ventilated environment, and there should be facilities to prevent high temperature, fire, static electricity and lightning. The storage area should have a striking warning sign of "No kindling".
9. Note: 1. Qualified safety and environmental protection fuels and fuel tanks provided by qualified manufacturers should be used to avoid anomalies and accidents. 2. Please have qualified personnel install and use the fuel tank; 3. The fuel tank core must be placed upright, and it is forbidden to lie flat and upside down. 4. After the fuel tank is ignited, please check whether the flame is normal. Please keep the air circulating when using the fuel tank. 6. Do not touch the surface of the fuel tank when using it. 7. If the fuel tank can't work normally, please check whether the fuel core of the fuel tank is damaged. 8. When the fuel tank is not on fire, you must contact a professional immediately. It is forbidden to adjust or modify the fuel tank body without permission. 9. When the oil tank is found to be leaking (smelly), it must not be used. Open the doors and windows for ventilation to avoid accidents after burning. 10. If the fuel tank is on fire, immediately cover the fuel tank with a soaked towel, move the fuel tank to an outdoor open place and call the police. 1 1. If the fuel tank is on fire, stop immediately and take immediate measures to put out the fire. Open the doors and windows to let the air circulate, and then check the cause of water leakage. 12. When using the fuel tank, don't use the non-special igniter to ignite. 13. When the fuel tank is ignited correctly, someone should be guarded to prevent the fuel tank from tilting and causing leakage accidents. 14. The oil tank storage room (room) should have good natural ventilation and be equipped with at least 2 fire extinguishers. 15. When handling the fuel tank, handle it lightly. It is forbidden to roll on the ground and knock at will to prevent damage and danger.
10. Warning: 1. It is forbidden to use open flame to test leakage. 2. It is forbidden to dump surplus fuel. 3. It is forbidden to touch the burning core tank. 4. It is forbidden to disassemble and repair the fuel tank without permission. 5. It is forbidden to tilt and move the fuel tank during use. 6. Strictly prohibit minors from approaching or using fuel tanks. 7. It is forbidden to use other open flames such as coal cans in the same room. 8. It is forbidden to use fuel tanks in underground and semi-underground spaces. 9. It is forbidden to disassemble and repair the fuel tank and fuel core without permission. 10. It is forbidden to put flammable items at the bottom of the fuel tank or near the fuel tank body. 1 1. It is forbidden to use defective or leaking fuel tanks to prevent danger. 12. It is forbidden to dismantle, modify, relocate and install the fuel tank and fuel core without authorization. 13. It is forbidden to use facilities and equipment such as oil tanks and fuel produced by unqualified manufacturers. 14. It is forbidden to use naked flames, switch electrical appliances, make phone calls, etc. At the scene of the oil tank leak. 15. It is forbidden to live and work in the special room of the oil tank storage room, and it is forbidden to pile up inflammable and explosive articles and use open flames.