How to decorate the handrail of the stairs to look good?
If the handrails of the stairs are beautifully decorated, you must choose the ones that suit your home style, which are divided into rotary stairs, straight stairs, curved stairs and special-shaped stairs. Compared with loft-style houses with relatively small space, it is generally suitable for spiral stairs, straight stairs and special-shaped stairs; And villas and duplex houses with larger space can choose some magnificent arc stairs. After choosing these, it is also very important to choose the paint color of the stair handrail.
Installation method of stair handrail
Positioning and marking:
A. Install the handrail fixing parts: after positioning and correcting the position, elevation and slope, the longitudinal center line of the handrail will pop up.
B, according to the design of the handrail structure, according to the bending position and angle, draw the bending or tangent line.
C, stair balustrade and handrail top surface, draw the position of the starting point and ending point of straight line segment, elbow and bending segment of handrail.
Matters needing attention 1: First, make a full-size sample, and after checking with the on-site marking, mark the elbow material according to the sample, and make a prototype wool (the wool size is generally about 10mm larger than the design size). Pre-assembled according to the marking position, bonded to the end of the longitudinal straight handrail, slotted under the elbow, and closely combined with the railing flat steel or fixed parts.
Note 2: Match the starting elbow according to the slope of the top surface of the railing or handrail. For general wooden handrails, elbows can be cut with handrail materials, and joint bonding can be carried out by cutting corners. At least three screws should be considered to be connected and fixed with the supporting fixture of the cutting section of the block. When preparing the handrail joint with a cross section greater than 70mm, in addition to bonding, it should also be made into a blind tenon or riveted with iron parts.
Note 3: When the stair handrail adopts integral elbow, a full-scale model should be made before making, and the elbow material should be marked according to the model to make a prototype blank (the blank size is generally larger than the actual size 10mm). When bonding elbows, the working environment temperature shall not be lower than 0℃. The groove under the elbow should be closely combined with the flat iron of the railing and must not be loose. Drill holes before screwing in wood screws, and do not directly knock them in with a hammer.
So how do you decorate the handrails of your stairs? Bian Xiao introduced some methods and skills of decorating stair handrails here. I believe you will know how to decorate the stair handrail after reading it. In fact, there are many materials for decorating stair handrails now, but I often don't know how to decorate them after buying good materials. Stairs and skills are very important, so that you can better decorate stair handrails. If you need to decorate the stair handrail in your home, you can decorate the stairs with the method introduced by Bian Xiao, hoping to help you.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~