Current location - Recipe Complete Network - Catering training - What equipment is needed to test the concentration of polymer in liquid?
What equipment is needed to test the concentration of polymer in liquid?
HYD-Ⅲ concentration measuring controller adopts imported sensor and is controlled by microcomputer. It can quickly measure the concentration of pulp, sludge and liquid, set the upper and lower limits of concentration in advance, and output an alarm signal when it exceeds the upper limit or falls below the lower limit. It can be connected with computer with RS485 interface, and can output 4-20mA current signal. Harbin Yuda Electronic Technology Co., Ltd. 0451-55550118

1, determination concentration range: 0%~ 80%

2. Accuracy: 0. 1%

3. Display time: 1 sec

4. Large LCD digital display

5. Power supply: 220V 50Hz

6. Size: 300×260× 100 mm.

Harbin Yuda Electronic Technology Co., Ltd. is the most senior provider of moisture measurement control solutions in China. It has been deeply involved in the field of moisture detection for 0/5 years, producing and selling a series of moisture meters, consistency meters, wood drying controllers, moisture meters, moisture detectors, infrared thermometers, metal detectors, moisture meters, pulp beating degree meters, formaldehyde content meters, moisture meters, consistency meters, oil-water separation controllers, moisture sensors, brightness detectors and so on.

Moisture meters include FD-G 1 paper moisture meter, FD-II consistency meter, FD-G2 rice and wheat straw moisture meter, pulp consistency meter, paper online moisture meter and wood moisture meter (FD- 100 high-frequency wood moisture meter and KT- 10 paper moisture meter).