Usage

1. Close the drain valve and fill the water tank with water.

2. Turn on the air supply and turn the fire adjustment knob to the middle fire.

3. Turn on the ignition switch, and the steamer will ignite automatically. You can adjust the fire control switch to the corresponding position as required.

4. turn off: turn off the ignition switch, the steamer will automatically turn off, and then turn off the cylinder valve.

Instructions for use

1. Before each use, you must check whether there is any air leakage in each gas. If there is any air leakage, you should stop using it immediately and eliminate the air leakage before using it again.

2. Keep the indoor air circulating, connect the exhaust pipe to the outside or install a strong exhaust fan indoors to ensure that there is enough oxygen in the room.

3. Use the tilting or inverted cylinders strictly.

4. When it is used for the last time or not used for a long time, the gas cylinder must be closed.

5. Wash it once a day to keep the water tank clean.

6, pay attention to the water level inside the water tank to speculate that the needle should be kept clean.

7, pay attention to keep the water source can continue to add water, to prevent dry burning.