How to deal with the anti-skid of restaurant floor

How to deal with the anti-skid of restaurant floor? Most restaurant floors are very slippery, including the kitchen and lobby, which are slippery and oily during normal use. Some restaurants are covered with tiles at the entrance of the lobby, so how to deal with the anti-skid of restaurant floor? How to deal with the anti-skid of restaurant floor? 1

1. Carpet floor mat < P > Laying anti-skid products such as carpet mat is the most simple and convenient scheme for most restaurants and hotels at present. It seems to save time and effort. Because of the serious card pollution, it is very troublesome to clean the carpet mat frequently, which also affects the overall beauty to a certain extent. If it is not cleaned in time, it will attract rats, ants, mosquitoes, etc., especially in hidden corners, and food residue or falling for a long time during meals will give off an odor. Moreover, it is unrealistic to lay a carpet in a kitchen with relatively many oil stains. Generally, a porous hydrophobic non-slip mat is chosen. It is suggested to use anti-skid mats in small areas, such as entrances and exits, toilets, kitchens, etc., which can remind and strengthen anti-skid.

2. Simple cleaning and anti-skid

The reason why the dining room floor is too slippery is partly caused by water stains and oil stains on the floor. In order to remove the oil stains on the floor well, a proper amount of detergent and alcohol can be added to the hot water that mops the floor, which has a very good effect. At the same time, when cleaning the floor, it should be dragged or sucked dry as much as possible to avoid slippery when cleaning, especially in rainy days, which requires more. This is the most basic and must be done for a long time. No matter whether anti-skid measures are taken or not, it cannot be an excuse for not cleaning.

3. Floor blow-drying device

If there is no manpower to protect the floor (please refer to the crowded shopping malls, and the public toilets are specially cleaned by special personnel), then adding one or two floor blow-drying machines or some special equipment can improve the work efficiency. It is suggested that when using the machine, it should be safe to avoid accidents caused by children's playfulness, and at the same time, it should be followed up by special personnel to avoid machine aging, long-term work and leakage.

4. Physically treating the floor for anti-skid

Physically treating the floor by machine polishing and carving some patterns actually solves the problem of anti-skid of the floor, but it is not so perfect in appearance. At the same time, because some of the treated floors are uneven, it is difficult to clean them in the future.

5. Use Q8 tile anti-skid agent

The accumulated water left on the ground in various situations must be treated in time. Anti-skid agent is used for anti-skid treatment on the floor. At present, more and more people use it. The floor using anti-skid agent can quickly become safe and anti-skid, with large surface resistance, and such anti-skid treatment is rapid and convenient, which does not affect the normal use of the floor. Some people will say that making a square meter non-slip is enough for me to buy half a tile! I think that doing this kind of "invisible anti-skid" will increase the cost. For example, using the "anti-skid processing outsourcing" service needs to consider the labor cost, material cost, after-sales service and so on. You can also purchase materials by yourself. It is also very convenient to construct under the guidance of merchant training. For one construction, the validity period is more than 5 years. Compared with the accident risk, the average daily sharing cost is very low, which is worthwhile.

6. Redecorating

Many friends think that this method is out of the scope of discussion. Since the ground has been completely changed, there is no need to do anti-skid treatment, right? No matter what kind of floor is used, including replacing it with anti-skid brick itself, as long as it is as slippery as oil when it meets water, and the tile floor is generally not too slippery as long as it is dry, so the anti-skid of the floor should be comprehensively considered from the perspectives of cleaning difficulty, later maintenance cost, environmental protection and safety, and beautiful image, instead of "killing the goose to get the egg" for anti-skid treatment, and should be combined with the actual situation of the restaurant.

On the whole, each anti-skid treatment method has advantages and disadvantages, and owners can choose according to the actual situation of their own restaurants. How to deal with the anti-skid of dining room floor 2

First of all, the simple anti-skid method of floor tiles is to pay attention when mopping the floor, be sure to bring some soapy water, wet mop and then dry mop or ventilate and blow dry before walking;

Secondly, tile anti-slip agent is used to prevent slippery;

Nano-anti-skidding agent, such as Amberlite floor tiles, is widely used; The nano anti-skid agent for Amberlite floor tiles is a water-soluble liquid, non-toxic, harmless, with super penetration, which can effectively penetrate into the capillary channels of floor tiles and stone materials, widen the channels through chemical interaction with floor tiles or stone materials, and form a physical sucker effect when contacting with the soles of feet in case of water or oil stains, which is absolutely safe for people to walk on!

Even if the surface part is worn in the future, the existing combination change part in it is stable and has a certain depth, so it can keep the anti-skid effect for a long time!

product features: high-efficiency anti-slip: the surface friction coefficient before and after use can be increased from 1.1-1.4 to 1.8-1.9, and the more slippery the floor tile is, the more obvious the effect will be;

Long-lasting effect: once sprayed, the anti-skid effect can be maintained for 5 years with regular use frequency;

Or you can try this way. Wipe the brick surface with a wet towel to test it. If there is water repellent, sprinkle moisturizing powder first, so that the nano anti-slip agent can be evenly distributed on the brick surface, then put on rubber gloves, pour a proper amount of nano anti-slip agent on the floor tile, take a towel or self-made wool head to evenly spread it all over the brick surface, and the nano anti-slip agent will automatically penetrate into the interior of the floor tile to react. After the floor tile is dried, the nano anti-skid agent is coated with a towel for the second time; How to deal with the anti-skid of dining room floor 3

The anti-skid of dining room floor can be treated with anti-skid agent. Compared with the traditional anti-skid methods such as anti-skid pad and anti-skid sticker, the advantage is that it does not affect the appearance and is clean and hygienic.

Anti-skid agent principle:

Anti-skid agent for floor tiles has super penetrating power, which can effectively penetrate into the capillary pipeline on the ground. Through the chemical interaction with the floor tiles, the pipeline is widened, and when it contacts with the soles of feet in case of water or oil stains, it can form a physical sucker effect, and the more slippery the ground is, the more obvious the effect is.

The processing steps are as follows:

Step 1, test the ground state

Facing any construction site, it is necessary to determine a test area. First, clean the ground, dip it in clean water with a flat mop, and smear it directly on the site to see if there will be water accumulation on the ground;

if water accumulation occurs, proceed to the second step of wax removal;

Step 2, wax removal or floor cleaning

Step 3, coating protective agent

The dosage standard of anti-slip agent coating is as follows:

① The water absorption of anti-slip agent coating tool is 311ml in dry state;

(Put the dry special coating tool for protective agent into 1 kg of anti-slip agent, take it out and squeeze it for 3 times)

② According to the above standard, you can dip it for 7 times, and apply 16 tiles according to the conventional amount each time;

(the size of each tile is 1.6*1.6=1.36㎡)

③1 kg of anti-slip agent can coat 112 tiles, with a converted area of 41.32㎡, and a barrel of 11 kg of anti-slip agent can treat 413.2㎡;

note: if the anti-skid agent still collects water after being coated in this step, then add a little detergent to the anti-skid agent;

Step 4, wait for the effect

After the ground to be painted is completely painted, let it stand for more than 11 minutes;

Step 5: Clean the floor and test the effect

Because the anti-skid agent is semi-oily, it is necessary to thoroughly brush the surface with a flat mop or brush while washing with clear water, so that the anti-skid effect will be perfectly presented, otherwise the anti-skid effect will not be tested without cleaning the floor anti-skid agent.

Note:

There are many kinds of anti-slip agents, and different materials need different anti-slip agents, so they cannot be mixed.

Keep out of reach of children, and avoid eating by mistake.

direct contact with skin. If it accidentally gets into eyes, please wash it in time and seek medical attention.

after the completion of construction, the surface color of ceramic tile becomes slightly lighter or matte, which is a normal phenomenon;