specialized in manufacturing, leading in technology (waste oil refining equipment)!

wanfuer

petroleum machinery

(waste oil refining equipment) is professionally designed, professionally manufactured, with quality assurance, "quality first, customer first", and the (waste oil refining equipment) developed by advanced technology is reliable in quality and complete in model. Free on-site installation and debugging, teaching technology!

1.

Main technical features

1.

This equipment adopts atmospheric catalytic cracking process and product chemical extraction technology.

2.

The equipped

environmental protection equipment

is relatively complete. (such as waste gas recycling system and advanced anti-burning technology)

3.

Unique high-efficiency decoloring and deodorizing design solves the color and odor of products at low cost.

4.

The output is high, and the oil yield of pure crude oil is about

85

-

-91%.

5.

The equipment design is reasonable, the manufacturing process is advanced,

the degree of automation is high, and the safety facilities are complete.

6.

It has a wide range of uses.

II.

Products applicable to the equipment

1,

waste engine oil,

waste plastics

,

waste tires

refined crude oil.

2.

Waste oil

. For example:

gear oil

transformer oil

, waste diesel engine oil, waste oil residue, waste engine oil, etc.

3.

Waste washing oil.

III.

Process flow

The crude oil that needs to be further processed is pumped into the cracking tank by an oil pump, and then extracted and heated at normal pressure to distill off oil and gas, which enters the condenser through the catalytic tower, and the liquefied part is condensed into oil, and the non-liquefied part is sent to the heating system through the waste gas recovery system to be burned. The condensed oil enters a

oil-water separator

to separate water, and finally enters a refining tank for decoloration and deodorization to generate refined oil.

IV.

Safety

In the process of oil refining, the main components of non-liquefied waste gas are

alkanes from C1 to C4, so direct combustion is dangerous. In our current production process, before burning it as fuel, it is first made to pass through a safety device

-

-

water seal

, so that it can be completely burned to achieve safe production. Unique explosion-proof device makes your production worry-free.

5. Environmental protection

1.

Waste gas: The safety device

-

-water seal is fully burned, which not only eliminates waste gas pollution, but also saves a lot of energy.

2.

Waste solids: There will be a very small amount of waste residue in the production process, which can be recycled into the furnace and burned as fuel.

3.

Waste water: no waste water is discharged.