tatami is one of the furniture types. Let's take a look at the manufacturing process of Japanese-style furniture. Platform height
Platform height of electric elevator = wire tube keel+elevator+2.5-3cm desktop+1-2cm adjustment gap+tatami mat thickness is generally 5cm (if tatami mat is not installed, it is not considered). Platform height of manual elevator = lifting basin floor+elevator+3cm thick desktop+1-2cm adjustment gap+tatami mat. If you don't install tatami mats, you won't consider it.) Desktop size
The desktop should be based on the user's situation and the length and width of the platform, and the following formula can be used: (room width-desktop width) ÷ 2 > 45cm (lifting the table edge to the wall edge is less than 45cm, which reduces the comfort of people under the seat). It is suggested that the size should be 81-91cm square (the manufacturing range is 71-111cm). Wall baffle
The wall baffle not only protects the edge of tatami, but also adjusts the rules of the platform. Solve the problem that the wall is straight and big, so that the plane of the platform cabinet can be square. Its width is not a fixed number, depending on the material and wall surface. The height is based on the thickness of tatami mat, and the commonly used mat thickness is 5 cm. Bearing of the platform
Bearing of the platform is the key, so the span (width) of the box is not easy to be too large, and it is beneficial to control it between 51-81 cm. According to the situation, wood square or other lining plates are added under the cover plate. Tatami mat
The floor platform where tatami mats need to be installed can be made into a square, preferably a square, or at least two of them are of the same size if the length, width and size allow. After all, tatami mats will be worn, but each tatami mat has different frequency of use. If there are several tatami mats of the same size, they can be replaced according to the wear condition. Electric lift
don't forget to put the power cord of the box under the bottom plate when using the electric lift. And open the outlet hole on the bottom plate. Even if you install a manual elevator, it is best to leave a power socket in the elevator pool. Tatami size
The maximum size of tatami mat is 2m× 1m. When making the platform box, it must be controlled within this size. Elevator type
There are manual and automatic elevators. Manual is about 511~1111, and automatic is about 1511~2111.