The width of the sliding door is exquisite. The gold size of a normal door is about 80 cm× 200 cm. In this structure, the door is relatively stable. If the height is higher than 200 cm or even higher, it is best to reduce the width of the door or make more sliding doors on the premise of keeping the area unchanged to maintain the stability and safety of the door.
Use the sliding door carefully from the ground to the top (open the hanging rail box). Because the swing amplitude is too large when pushing and pulling, the sliding door is easy to deform after a long time, and the deformed back door cannot be opened, which means that it cannot be maintained and used.
Because the sliding door is in contact with both sides of the wall or cabinet, there should be no other objects in the contact position.
Close the sliding door. For example, the position of drawers in cabinets should avoid the intersection of sliding doors and be higher than the bottom plate.
At least1cm; The drawer on the folding door cabinet is at least 15cm away from the side wall, and special attention should be paid to the power supply on the wall here.
Switch and socket, if the sliding door is blocked from closing, the position of switch and socket should be changed.
No matter what material you use to make the floor, you should keep it flat, and the four walls at the door should be horizontal and vertical.
Otherwise, the installation rear door will be skewed. The adjustable error shall not exceed 65438 00 mm.
Please do not install the baseboard at the installation location. The plaster line can be installed on the sealing plate above the closet. If the door is direct
Do not install plaster line at the top.
Carpets with a thickness less than 5 mm will be cut off and directly attached to the upper and lower rails. Carpets with a thickness of more than 5 mm can be directly fixed on the carpet with screws if double tracks are installed; If the monorail is installed, the carpet at this position must be cut off, and 3-5 mm thick wooden strips should be put in the carpet in advance, so that the monorail can be directly attached to it.
At the junction of wooden floor and ceramic tile, this situation mostly occurs between balcony and living room, and between bedroom and living room. The solution is as follows: 1. Install the lower guide rail on the material as much as possible. 2. Add wood or marble with the same width as the lower rail between the two materials. Threshold stones can also be used in the kitchen.
How to install the lock on the sliding door? I wonder what material is your door? If it's aluminum and magnesium with a single glass door with 40 or 50 sides, you can only buy a latch lock for a plastic-steel window.
Installation method:
1. It's best to ask a master with locking experience to install it. If you operate by yourself, please punch holes in the distance template according to the installation requirements of the product manual and the installation size of the lock body.
2. Check whether the drilling holes are correct, install the lock body into the holes in turn, align the rear fixing screws, install the screws and connecting screws on the outer panel part, insert the interlocking square bar into the square bar hole of the lock body, align the square bar hole of the outer panel part with the interlocking square bar hole, and install the outer panel part in strict accordance with the steps in the product installation instructions.
3. Install the inner plate components and align the rear fastening screws; Insert the lock body into the lock hole of the lock body from the inside out; Insert the screw from the lock body panel hole, align with the thread of the lock body mounting hole, and then tighten it. Then install the lock box or lock plate on the door frame.
4. After the initial installation, turn the inner and outer handles of the crescent lock to observe whether the oblique tongue can be retracted smoothly; Turn the knob on the back panel to feel whether the square tongue retracts smoothly; Insert the key and rotate it back and forth to feel whether the square tongue extends and retracts smoothly.
5. After tightening the assembly screw of crescent lock with a screwdriver, repeat the above actions and turn it several times to ensure that the lock tongue can advance and retreat freely after the screw is fixed.
How to install mosquito curtain on sliding door? If the anti-mosquito effect is good, the width range of the whole sliding door frame can be customized, and only the door curtain can be installed, so that when the sliding door is opened, the position where the magnetic stripe is attached is just beside the door, and the door curtain can be opened at the side of the door when entering and leaving.
Or add a slide rail next to the sliding door track to make a sliding screen door the size of a sliding door, but it will be more troublesome to push and pull the screen door.
Installation of sliding door. The floor is high and the tiles are low. How to install the sliding door and how to handle it? It is ok to be a little higher indoors than outdoors. You can choose a high-rail sliding door. Generally, big brands have high-track options. High-gauge sliding doors for Asian doors and windows are recommended. The height of the track is exactly 30 mm. You can fill it in the tile, it is absolutely firm.
How to install solid wood sliding door in kitchen? Find a manufacturer or carpenter to install it.
How to install the sliding door without swinging and the solution to prevent the pulley from moving;
1. Determine the installation height of the sliding door.
It is generally recommended that the height of the door should not be less than 2.07m, in which the height of the door itself accounts for 1.95m, and 0. 12m is the height of the rail box. Once the height of the door is lower than 1.95m, people will feel depressed.
2. Width of sliding door.
The gold size of the door is about 0.8m*2m. In this structure, the door is relatively stable. If the height of the door exceeds 2m, the width of the door should be narrowed or more sliding doors should be made to maintain the stability and safety of the door.
Step 3 find the baseline
When installing the sliding door, the horizontal position should be measured with the horizontal line and coordinate datum line first, which is the premise and guarantee to ensure the continuity of the sliding door in the later period.
4. Fixed position of the door
Remove the bolts and nuts on the hanger, put them on the I-beam slide rail, and fix the I-beam slide rail at the bottom of the upper beam with screws. Fix the lower guide rail with expansion bolts or plastic expansion screws.
5. Installation of fixed pendants or rails
The installation of the track is to ensure the smooth movement of the sliding door; When installing the door leaf, put the hanging bolt into the special hole at the top of the door leaf, level the door along the guide rail with a wooden mold, and then fix the hanging bolt with the pendant with a nut; Or the track is fixed on the ground with screws.
6, check
Because the sliding door will bear all kinds of forces during use, it is necessary to check this aspect after installation, try it several times more, and observe whether the door is smooth when pushing and pulling.
Glass sliding door door lock, how to install it? A set of crescent locks for plastic-steel windows, a number of screws, a screwdriver and an electric drill, installed where children can't reach the sliding door. For the installation method, refer to the sliding door with plastic steel window structure. Crescent locks are found in general local buildings. This is a set of switches, which is easy to use and prevents children from playing. Cheap and affordable, you can install it yourself.
Installation method of sliding door, how to install sliding door correctly 1. Track installation
When installing a sliding door, if it is a hanging sliding door, the track box must be installed first, and then the brick should be attached to handle the junction of the two places. The pressure on the track is still very high, and cracks may appear after a long time. When installing the track box, you need to pay attention to the size, the length should not exceed 12cm, and the width should not exceed 9 cm, because the height of doors in many families is about two meters now. If the door is lower than1.95m, there will be a sense of oppression, so special attention should be paid to the size and specifications of the track box, and it will be ugly if the track box is not exposed.
Second, the coordination of the ratio of width to height.
The approximate range of normal door ratio is 80 cm by 200 cm, and the width must be stable. If the installation position is too high, the area should be kept unchanged and the width of the door can be adjusted. Increasing the number of sliding doors is a good installation method of sliding doors.
Three, sliding door installation matters needing attention
When installing the sliding door, be careful not to have other objects at the contact position, which will affect the door panel switch. In the process of switching, you should also avoid the position of the socket or switch. If you must install the sliding door in this place, then try to move the power socket to another place, otherwise it will be very troublesome in the use process. When installing sliding doors, we should also pay attention to the position of the skirting line, and the sliding doors should not overlap. No matter what material the sliding door is made of, it should be horizontal and the position of the door opening should be vertical, otherwise the sliding door will look crooked after installation.
How to install screens for sliding doors and windows left and right? Assemble the yarn box, air duct and bottom, and then tighten it with six screws to make it a square frame. Place the screen window at the installation site, and pay attention to the symmetry of the margins between the left and right air ducts and the door and window frames, and the bottom position is about 5cm lower than the frame of the door and window. After the screen window is placed, the left and right sides are clamped to prevent it from moving.
Use an electric drill with a 3.2 mm drill bit to drill holes on the inside of the door and window frame thong.
According to the requirements, drill 6 to 14 holes in the corresponding places of the left and right air ducts and the bottom pad, and then screw in the screws to complete the installation.