1. Installation mode of magnetic track lamp: The installation mode of magnetic track lamp includes embedded type, exposed type and hoisting type. If there is no ceiling in the living room, you can choose the exposed type; If it is installed above the restaurant, you can choose the lifting type; Embedded can generally replace downlight. However, during installation, attention should be paid to adjusting the angle of lamps to achieve different lighting effects.

2. What are the precautions for the installation of track lights?

(1) First of all, the lamp should be placed in the correct position of the track, but attention should be paid to the connection between the lamp and the track, generally three-ring track and three-ring connector, single-ring track and circuit adapter. Moreover, when installing the track and connector, we must remember that the direction cannot be mistaken, especially when the track of the Third Ring Road has grooves and the corresponding connectors also have protrusions. When installing, the two should be connected and adjusted according to the horizontal angle of the lamp to ensure that the light can be fully projected.

(2) Secondly, there is a top plate on the top of the rail lamp holder, and two protruding elastic terminals are also designed on the roof. When installing the rail lamp holder, the top plate should be used to broadcast into the rail, and the elastic terminals should be in contact with the conductive parts in the rail respectively. Finally, put the lamp holder into the track to ensure the horizontal movement of the lamp holder and adjust the light.

(3) Finally, the track lamp is relatively heavy, so attention should be paid to the strength and tightness of the track when installing it. After the track is installed, the conductive head should be placed at the end of the track, and the conductor should be installed in the connector of the track and fixed with screws.