Current location - Recipe Complete Network - Catering training - Installation instructions of grease trap
Installation instructions of grease trap
The grease trap products should be directly installed on the channel containing sewage and oil-water. The sewage outlet can be aligned with the grille inlet of the oil-water separator and can be connected with other equipment through pipelines. During installation, the oil-water separator (grease trap) must be adjusted to a horizontal position.

Before the first use, the equipment should be filled with tap water, and the water level regulating pipe should be adjusted so that the top of the water level regulating pipe is at the same level as the upper edge of the oil spill tank, and the position of the water inlet pipe should keep a certain distance from the debris separation box to facilitate the removal of the debris separation box.

Introduce oily wastewater, and adjust the water level regulating pipe again until the oil drainage pipe only discharges oil without drainage.

If the position of the oil drain pipe is too low, you can open the cover plate of the equipment and take out the oil with tools.