The decoration of every home is naturally inseparable from the decoration of the toilet. The function of the toilet is almost always related to water, and the most important thing in toilet decoration is waterproof. Therefore, the waterproofing of the toilet is an important indicator of whether the toilet is good. In order to meet the waterproofing standard, the waterproofing of the toilet should be correct and effective in the construction process. If the waterproofing is not done properly, the leakage problem will surely lead us to collapse. If these important steps are not completed, the final product of toilet construction will also be problematic.

How to Waterproof a Bathroom is actually how a bathroom should be waterproofed. For how to prevent leaks in the bathroom, it is recommended to use kitchen and bathroom waterproofing slurry, because more than 70% of bathroom leaks are concentrated in the yin and yang corners, pipeline penetrations, sanitary ware, and the perimeter of the floor drain. Kitchen and bathroom waterproofing slurry using the first repair and reinforcement of the key parts and then the overall waterproofing concept, that is, the first use of quick-setting repair mortar reinforcement easy seepage parts, and then use waterproofing slurry overall leakage prevention, so the special material is more targeted, of course, leakage prevention effect is better.

1.How to prevent leaks in the bathroom, the first time to brush the anti-leakage paint. Before construction, make sure the construction site is clean and dry. Leak-proof coating should be fully coated, no leakage, combined with the substrate firmly, no cracks, bubbles and peeling. The coating height is consistent and the thickness meets the requirements specified in the product.

2.How to prevent leakage in bathroom, brush the second layer of anti-leakage coating. Note that there should be a certain time interval between the second coat of the leak-proof coating, and the second coat can only be carried out after the coating is completely dry. The exact time depends on the coating. If the interval is too short, the effectiveness of the leak-proofing will be quickly reduced.

3.How to prevent leakage in the bathroom, lay a protective layer. In order to prevent subsequent construction damage to the leakproof layer, should be laid on the surface of the leakproof coating protective layer. The protective layer should completely cover the waterproof layer without missing.

4.Bathroom how to prevent leakage, water closure test. Closed water test, the draft line at the point of contact should not be less than 1 cm, after no leakage is observed, it should be maintained for at least 36 hours to be considered qualified. If there is a leak, it needs to be redone and cannot be ignored. Grass-roots treatment, cleaning, leveling layer, bonding layer, acrylic waterproof layer, water storage test, secondary water storage test.