Second, use commercial bait.
1 Select a mixing basin and measuring cup with a large basin bottom, and after determining the ratio of bait to water, first pour the bait into the basin and spread a thin layer on the basin bottom. After pouring the water, the water can fully and quickly penetrate with the bait and naturally mix evenly. Note that many commercial baits containing wheat protein have strong water absorption and grab water quickly. If the bait powder layer is too thick, the bait layer on the surface will take away all the water, and the remaining semi-dry and semi-mixed bait is at the bottom, which can not make an ideal bait state. Only this bait can be used for other purposes or dumping.
2. After adding water, it will take some time for the wheat protein fiber in the bait to absorb water and develop into filaments together with other ingredients in the bait. If it is not placed for a long time, friction will affect the uniform distribution of swelling effect of wheat protein fiber, resulting in uneven proportion of bait.
3. No matter how good the bait is, it is best not to rub it too much or rub it out in advance, which will affect the setting effect of the bait.
4. Snow-like wheat protein bait, don't be too exposed to the sun and air, because it will absorb the moisture in the air, making the bait group thinner and unable to be used normally. So it is enough to adjust the bait 1~2 hours each time. Don't adjust too much. Better adjust it now.
5. It is suggested to choose or adjust the bait with suitable viscosity for fishing. Don't rub it after blending, because the purpose of rubbing is nothing more than increasing viscosity; Keeping the natural state of the bait without kneading will make the air, bait and water in the bait evenly distributed and maintain the set effect of the bait. In water, if there is no air in the bait, its specific gravity and solubility will be affected.
Thirdly, the modulation of commercial bait.
1. Accurately measure the required amount of bait in the cup, and gently compact the bait in the cup to make the bait amount accurate.
2. Put the bait into a dry wide bottom and a food bowl, and apply it evenly to ensure that it is not too thick, preferably with half an index finger flat.
3. Take a proper amount of water from the dose cup, quickly put it into the pot and shake it in one direction to make the bait absorb water evenly. After the bait fully absorbs water, the expansion process ends (3-5 minutes in summer and 30-60 minutes in winter).
4. Gently lift the expanded bait from the bottom of the basin with your fingers, and then leave it for a period of time (preferably wet your hands in advance) to fully expand the partially inhaled part.
5. Take out a part that needs to be used and gently group it into a ball; The other part covers the basin with a semi-wet towel and puts it in the shade for later use.
Adding water is the key to soften or harden the bait. Addition and subtraction can also control the specific gravity and solubility of bait. But try to add and subtract water bit by bit. The method mentioned here is only applicable to most commercial baits, and different water addition can determine the different properties of a bait.
1, how to control the atomization speed of wire drawing bait: you can add some sticky bait appropriately, such as Alpha 2 1 of Marujiu, or pat it a few times (pay special attention not to beat more, otherwise it will become gluten).
2. How to control the fiber length of wire drawing bait: You can add short silk bait, such as an old ghost's fast break, or play bait several times to make the fiber shorter. Adding wire drawing powder can make the fiber longer.
3. How to control the proportion of wire-drawing bait: The proportion will be marked on the packaging bag of general bait, and you can adjust it according to your own needs. If it's not marked. Then you have to try it yourself. Remember when you try. In addition, the bait is generally heavier than the bait, which can be seen from the appearance. The more particles, the greater the proportion.
4. How to control the wire drawing shape of wire drawing bait: the first three items are well controlled, and the rest is the bait-water ratio. First, it is possible to add water according to the bait packaging bag.
. Second, if you want to pull it down, hit the sticky point of the bait several times, and the proportion of water is slightly higher. If you want to make it bigger, there will be less water. Remember, you can't beat the bait at any time. But I always don't
Friction. Add enough water at a time. After absorbing enough water, put it aside to wake up the bait. When the bait wakes up (5- 10 minutes), gather in a pile, put it in the palm of your hand, and squeeze out the air with your hands.
Bang Qi. You can put it on the bait tray.
Bait-pulling fishing drift should use bait with light specific gravity, which requires fast atomization and quick turning; A slowly sinking buoy.
The bottom fishing with bait should be aggravated; The bait of strong hook should be equipped with carbon foot and hard tail.
Fish eat well and atomize quickly; Fish is slippery and sticky, and fish is big and big. If the fish is small, it must be pulled down.
Bait pulling is as hard and soft as earlobe, so it should not be controlled by hardness, but by solubility. Slow fish is fast, fast fish is slow.
When pulling the bait, gently pull the surface of the bait ball to avoid being pulled to death. (The bait is not loose)
It is very important to wake up the bait. Wake-up bait is to make the bait with water fully absorb water and make the wheat protein in the bait change from powder to silk mesh. In this way, the bait can be shaped and awakened, that is, the bait is in a good state. The newly made bait is not filled with water. If the bait is pulled out, the fiber inside does not come out, and the pulling effect may be unsatisfactory. In summer, the awakening time of bait is slightly shorter (about 3-5 minutes); It takes longer in winter (about 10- 15 minutes).
Compared with the important bait, it sinks faster in half water, and the fish is not easy to float. When bottom fishing, the fish is quiet and can be held down, so it is generally used for bottom fishing. For example: 9 18 2#
Bait with small specific gravity is necessary to catch a deep and fast fish, which is atomized quickly; Slowly sinking; It is easy to attract fish to the same fishing shed for a long time, and fishing in deep ponds is not allowed.
[The main bait is to adjust the proportion of different bait according to the situation of the fish: the float should be light; Bottom adjustment; Shallow water is light; The deeper the water, the heavier the solution and the distribution of bait. That's what the experts said. I'm not ready yet ~ hehe ~
Note: the difference between wheat protein and 5# crucian carp
Wheat protein fiber is pure, without snow pollen, and the bait is mainly sticky, but Laogui 5# has snow pollen, which increases the looseness. You should know wheat eggs with snow pollen.
White bait can give full play to its loose advantages when released in the later stage.
Method for make red worm bait
-Hinge 1/2 Red worms are cut into small pieces (with blood) and added with bait powder without water; Pull bait
The proportion of wire drawing powder is slightly larger (about 15%). After mixing evenly,1:1/mixed with water; Finally, gently knead the remaining 1/2 whole red worms into the awakened bait (few times).