1. There are two red lines on both sides of the controller and six lines on the other side, one red, one yellow, three green and three yellow from bottom to top.
The one with two red wires on one side is the incoming wire, that is, the side where we want to connect the plug.
3. The red one is the positive electrode, and all the wires of the positive electrode of the lamp beads are connected here.
4. The yellow one is the negative line of the lamp bead with the desired effect, and some words in it are always on without flashing.
5, the green is the effect of the middle subject flashing. Connect the negative poles of all major words to this line.
6. Each line of the controller has a description of Huang Sangen, and the three-way happy lantern is the negative pole of the lamp bead around the light box connected to these three lines. The common positive pole (red line+) supplies power to the positive pole of each street lamp, and the main flash (green line) is to make it flash (you don't have to pick it up if you don't want it to flash).