Clean up the ashes in the stove before starting a fire. If there is too much ash, it is difficult to make a fire. Then, put some flammable dry leaves or twigs at the bottom of the stove. Then use waste paper to ignite the dry leaves and branches in the stove, put some dry corn cobs into the stove after ignition, and finally put honeycomb briquettes or coal blocks into the stove after the corn cobs start to burn.

The orientation of traditional stoves is based on the population entering firewood, while the orientation of modern stoves is based on the switch of stoves. As far as the kitchen is concerned, the diagonal position of the kitchen door is the direction of gas gathering. Installing a stove here can make the stove face the door obliquely without touching it, and it can ignite the fire coming in from the door, which is beneficial to the transportation of the house.

Method for manufacturing rural cooking range

1, determine the position of the stove, and the shape can be determined according to your own needs.

2. Determine the height of the stove and mark it on the wall. Generally, the height is about 80cm.

3. Set smoke exhaust holes on the wall and block them with mortar.

4. build a chimney connected to the smoke outlet outside the house, which must be higher than the roof, otherwise the smoke at home will choke.

5. The stove surface is insulated and fireproof, and the stove is filled with insulation materials.

6. The furnace is built with brick sand to prepare for the construction of refractory mud behind.

7. For the furnace constructed with refractory mud, the refractory mud must be compacted.

8. Use a pot to compact the refractory mud above the stove, fix the installation position of the pot here, and then trim the refractory mud flat.