Stainless steel tableware and kitchen utensils, such as spoons, shovels and bottle openers, are all matt polished. When polishing products, attention should be paid to the treatment of their reflective surfaces. Kitchenware has different shapes and structures. When shooting a variety of tableware and kitchen utensils together, it is necessary to use a large area of soft light lighting, and the light should be distributed according to their shapes and structures. The backlight can be soft light, the soft light plate is enlarged in front of the lamp, and the soft light lamp and reflector are added on the front, and the placement angle of kitchen utensils can be appropriately adjusted to form light-dark contrast and three-dimensional display.
When shooting a stainless steel rice basket, you can use a soft box to light it, with one side backlit and the other side backlit at the corresponding position. Pay attention to the height and light transmission angle of the lamp, and observe the reflection on the handle of the fistula and eggbeater until the shape is satisfactory. Because the rice washing basket and the egg beater are all filar silk structures, we should try to use soft light without projection. If the soft box is not soft enough, you can add another layer of sulfuric acid paper in front of the lamp. If it is a sub-light kitchen utensils, you can use hard light or multi-lamp lighting in a soft box, mainly by using a suitable background to highlight its shape and texture. Shooting kitchen props, three lights for lighting, two soft lights on the front and left, the same height as the main body. Reflect the shape and surface texture, put a flash on the right rear side to highlight the top, so that the background has a gradual effect. ?
? Electroplating faucet should be patted with soft light. Generally, soft paper can be made into curtains or cylinders, or surrounded by arc-shaped milky plexiglass, and the light is distributed around the periphery, so that the light is soft and the high floodlight is reduced. When shooting the faucet, fix it on the lamp stand, put five flashlights with soft light boxes on the front, back, left and top respectively, add a layer of soft light paper in front of the front, back and right lights, and block the white foam plastic plate at the gap on the top, bottom and left front sides to form a plurality of black and white blocks and lines on the faucet. The camera shoots horizontally at the same height as the faucet through the gap between the left front reflector and the front soft paper. When shooting, adjust the height of each lamp to achieve the ideal visual effect, and then remove the post of the lamp holder, which can be used as a poster or poster material.
In the case of shooting stainless steel sink, hard light is used to shoot, and the picture processing is low-key. In the dark black environment, two hard lights, one on each side in turn, one high and one low, reflect the stainless steel texture of the sink, and the photos are quite charming.