Homemade clothes rack-industrial clothes rack
Industrial hangers are straightforward and handsome. After mastering the basic principles, the hand-made method is not as difficult as expected. The point is that the sense of accomplishment after completion is absolutely satisfied!
1. You should prepare a black half-inch steel pipe, two steel pipes about 120 cm long as side frames, one steel pipe about 9 1 cm long as cross bars, two steel pipes about 45 cm long as bases and various joints.
2. The base part is made of a steel pipe of about 8 cm, and connected with the steel pipe of the base with a T-joint, so as to ensure the stability of the hanger and the base support plate.
3. Connect the side frame and the crossbar with a 45-degree elbow joint. The protruding elbow can also be used as a hook to hang bags and other sundries.
If you want to have a storage platform, the next step is to connect the storage board with the base. Before that, when fixing one side of the base, the connecting pipe must be used to prevent the other side from loosening.
5. Find a board of moderate size as a storage board. Um ... two tablets will do, but remember to nail it down!
6. Then polish and oil to ensure the smoothness of the plate, and then coat it with furniture polishing paint that emphasizes wood grain. After finishing these carpentry jobs, make a hole in the right place and connect the frame and the base through the wooden hole, and you're done!
Make your own hanger-wall hanger
In modern life, wall-mounted clothes hangers are highly respected by more and more people because of their good space utilization and strong decorative effect.
1. Prepare an aluminum wire with a thickness of 50 cm and 2 mm, cross-fold it to the right at 5cm, and reserve a short section to fold it to the left;
2. Fold the long end down to half of the eaves and the outline of the house, as shown in the figure, and leave 5cm for the hook when folding the double layer down;
3. Then fold the shape of the other half of the hut;
4. After the decoration bends out of the roof, take up the line;
5. Fold a U-shape as the door of the house;
6. Fold the hook out with pliers;
7. Making a bird hook: prepare an aluminum wire with a thickness of 50 cm and 2 mm, leaving 10cm, and then bend it into a small circle to make a bird's beak and bend it into a radian;
8. Adjust the radian;
9. Bend a small circle at the tail to make a bird's tail;
10 Fold the line down on the bird's stomach, leaving 5cm, and fold it on the image;
1 1. Draw an ellipse and adjust it to the shape of a bird's wing;
12. Put two threads on the bird's abdomen to complete the small circle winding;
13. Wear beads as bird's eyes and aluminum wires as decorative lines twice;
The clothes rack looks very simple, and it should be very easy to make in our impression. The above briefly introduces the manufacturing methods of lower industrial air hanger and wall hanger. I hope that through the above brief introduction, everyone will have a clearer understanding and understanding of the production of hangers. It can be seen that the hanger is not difficult to make. As long as we make a little effort, we can make the clothes rack with the style you want. You can try to think about it. Do people praise you for your style of clothes hanger?
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~