Question 1: I don’t have a printer at home, what should I do if I want to print a document? Now I can go to a photo studio, a copy shop, or some Internet cafes and print it out directly.

Question Two: How to print if you don’t have a printer at home? Taobao has a printing service. Find someone in the same city, give them the documents, and they will express it to you. If it is very close to you, you can also make an appointment to pick it up!

Question 3: Can the laptop print if it is not connected to the printer? How to set it up? 1. The computer host required to be shared must be in the same LAN and have a fixed IP address. 2. Select "Start" → "Settings" → "Printers and Faxes" on the host computer to enter the printer interface. Right-click the mouse and click "***Share" to confirm. 3. Then select "Start" and "Run" on the host computer, enter cmd, press Enter, enter "ipconfig" in the pop-up window, check the numeric address of the IP address, record it, and close the window. 4. Then on the laptop that needs to use the printer, click "Start" "Run" and enter "\\" and the IP address just recorded (the two first backslashes must not be missed, press Enter. At this time, in the pop-up You can see the previously shared printer in the window. Select this printer, right-click Properties, and click "Connect". After success, a shared printer will be generated in the computer, and the computer will also You can use the printer. Note: Some computers have firewalls and anti-virus software that will block access, so it is best to turn off the firewall before connecting

Question 4: Is the printer working when there is no network? Can files be printed? It must be possible. Unless it is a shared printer or a network printer, it can be printed directly without the network if it is connected to the local printer.

Question 5: How to install a printer without a CD? The installation of the printer is generally divided into There are two parts, one is the connection between the printer and the computer, and the other is the installation of the printer driver in the operating system. If you are installing a printer with a USB interface, you can directly connect the printer to the computer without turning off the computer host and printer during installation. Just connect one end of the USB cable to the printer and the other end to the USB port of the computer.

After connecting the printer to the computer according to the above steps, first turn on the printer and then the computer.

p>

After entering the operating system, the system will prompt that a printer has been found. The system must install the printer driver before you can use the printer. Some operating systems (such as Windows XP) come with many printer drivers that can be installed automatically. Most common printer drivers. If the operating system does not have a driver for this printer, you need to put the driver disk (floppy disk or CD) that comes with the printer into the computer, and then install it according to the system prompts.

If the printer is directly connected to the local computer, select the local printer; if the printer is not connected to the local computer but to another computer (the local computer uses the printer on the other computer through the network), then select the other printer here. In the example, select a local printer. After clicking, the system will provide a list of printer manufacturers and printer models. You can use the print driver provided by the Windows operating system. Select the printer driver in the list and click If. There is no driver for this printer in the list. You can install the driver provided by the manufacturer that comes with the printer. If the operating system is Windows 2000/XP, when the USB printer cable is plugged into the computer's USB interface, the system will When prompted to find a new printer, follow the prompts and put the driver CD into the CD-ROM drive. Click the "OK" button. At this time, the system begins to search for the printer driver. After the system finds the printer driver, click the "OK" button again. At this time, the system starts to copy files from the CD, install the driver, and finally prompts that the installation is complete, click the "Finish" button.

Question 6: Why does the printer print out no words? Check to see if the blackheads on the print are clogged after not printing for a long time. Also, have you turned on the power? Or click the print test? Also, is there a printing program installed in the computer? Is the printer connected to the computer socket? Anyway, the problem is much better. You can check one by one, or unplug the interface and plug it back in to try.

You first take out the ink cartridge and stick the ink head (where there is a chip) with tissue paper. ) to see if the ink is coming out well. If small ink lumps can be printed on the facial tissue, it means that the chip printer of the ink cartridge does not recognize it, so just replace it with a new ink cartridge.

If there is no ink printed on the facial tissue, Small ink lumps mean that the ink head is clogged. You can: use a disposable cup first, pour half a cup of boiling water; take out the ink cartridge, put the end with the chip into the cup (remember not to throw it in) , only the chip and the boiling water surface can be in contact), wait until the boiling water is dyed and then take it out; in addition, fold the tissue paper into several lines, absorb the water on the chip, and see if there are any small ink lumps on the tissue paper. If it still doesn't work, wrap the chip with facial tissue folded into several lines (to avoid getting it on your body), shake it vigorously, and shake it a few more times until the color comes out, and then install it on the machine.

If it still doesn’t work, the only option is to replace the ink cartridge with a new one.

Question 7: I want to print out something written in Word, but there is no printer at home. How can I print it? Store the file on a USB flash drive or memory card, and then go to a typing and copying agency to print it.

Question 8: How to print preview in CAD without a printer. 1. Right-click the model on the command bar to open the Page Setup Manager;

2. Click Modify;

3. Select the printer name as DWG TO PDF.PC3 or other options ;

4. Then change it to the size you want, click OK, and then if you want to preview, just click Print to generate the PDF and preview it.

Question 9: How to connect a printer to a computer without a CD-ROM drive? Does your printer have a USB interface? Most printers nowadays only have USB interfaces. All you need to do is connect the printer to your laptop. If the computer displays New Hardware Found, it means the connection is successful. If you need to install the driver, just go online and check the model number, download it, and then install it. Then it will be OK.

In addition, ink cartridges can generally be stored for a long time as long as the packaging is not opened, but it is not recommended to store them for too long (it is okay to use them within 1 year)

Question 10: How to print out a resume? I have a computer and no printer, but what I need is to print out a resume on paper. What should I do to get it? You can send it online via email, and then go to a print shop to print it