1. Create a new A4 page with RGB color mode and landscape orientation. Double-click the rectangle tool to draw a rectangle with the same page size, press F 1 1 to fill the gradient ellipse ① # 3d0f7a2a2 # 7d14ae3 # c3164b4 # feb715, and press g to adjust the gradient.
2. Enter the text with the font of Founder Zheng Da black simplified, and enlarge it with the selection tool. Click on the menu bar object to break it up, or press ctrl+k to split the calligraphy and adjust the text size, as shown in the figure.
3. Draw with Bessel tool and press C to control the lever. Put it in the position shown in the figure.
4. Select the Star Tool, pull out a star in the page, and enter the number of edges 5 and sharpness 53 in the property bar. The effect is shown in the figure below. Pull out the desired effect with the shape tool, as shown in the figure.
5. Click the selection tool, shrink the stars, hold down the shift key, and right-click to copy one. As shown in the figure. Select these two shapes, select the previous object in the property bar, copy three, resize them and place them in different locations. As shown in the figure.
6. Select all the objects in the box, select the combination of attribute columns, fill in # 6262F6 and make a copy and put it aside for later use.
7. Select the stereo tool. Select stereoscopic in the preset of the property bar, and change the stereoscopic color from #FDDD03 yellow to orange # e18501in the property bar; Set the vanishing point coordinates X:0MM, y:-/Y:- 175.864mm；; The depth is 5,
8. Put another copy on it. In the tool selection mode, find the contour tool in the toolbar and select the external contour in the property bar. The contour offset is 5 mm; Suitable until; The fillet of the contour is mitered, and the filling color is # d 31415; Fill the color inside with red, and then press ctrl+pagedown to go to the next floor;
9. Make a three-dimensional effect for the bottom layer, change the color from #FFF200 to #FF7700, and change the depth in the property bar to 10. Turn off the lights, the effect is as shown in the figure.
10, select the above three-dimensional characters, select the objects to be divided into three-dimensional groups and add gradient colors on the top layer, and press F 1 1, and the color value ① # 86117d2 # be1565438 ③ #.
1 1. Split the three-dimensional text into three-dimensional groups, and press F 1 1 to add gradient colors, ① # 6e0309 ② # 870e12③ # da1721. Press g to adjust the color, as shown. Location.
12. press CTRL+C and CTRL+V to copy one in situ. Select the contour tool, and select the internal contour with the contour offset of1.5mm.. Select the object to split the profile group. Then fill the interior with white, and the effect is as shown in the figure. Then import materials, balloons and gifts, and starlight.
13. Draw an ellipse, fill it with black, remove the outline, add transparency, and the ellipse gradually becomes transparent. The effect is shown in the figure.
CorelDRAW Poster Making Skills 1 First of all,
2. Add a rectangle and fill it with color. Double-click the rectangle tool in the toolbox, add a rectangle with the same size as the drawing page, and fill it with 100% black, so as to get the basic color of the bottom map, and the effect is as shown in the figure.
3. Draw Polygons Select the Bezier Tool and click in different places on the page to get polygons. Fill the outline color with white, repeat the operation, and pay attention to the gradual diffusion of the overall composition. The effect is shown in the figure.
4. Fill color In order to reflect the characteristics of the color printing industry, each polygon is filled with different colors. Here, the color above the color ring is used, and the effect is shown in the figure.
5. Draw an object In order to add some moving elements to a regular picture, choose "Bessel Tool" to draw a dynamic female figure outline on the page, and the effect is as shown in the figure.
6. Fill the object in the Edit Fill dialog box with uniform fill, fill the character object with (C:40, M: 100, Y:0, K:0) and remove the outline color to make it uniform with the polygon color below. The effect is as shown in the figure.
7. Draw an object. Use the Bessel tool to continue drawing two other character shapes with different sizes on the page and fill them with black. Pay attention to the size ratio of each character object, and the effect is as shown in the figure.
8. Add text. The composition of the current picture will be satisfactory. Let's start adding theme text. Select "Text Tool" in the toolbox, click enter text in the page, and set the font size and font of the text in the property bar. The effect is shown in the figure.
9. The default kerning for adjusting kerning is relatively small, which is not suitable for the current picture composition. You can adjust it appropriately. Select the shape tool, click the text, and then drag the right arrow to increase kerning. The effect is shown in the figure.
10. Continue to post posters with general words outside the store, which must be supplemented by other words, such as store name, address, telephone number and other information. These words can be appropriately adjusted according to the situation, and the effect is shown in the figure.
65438+
12. If you adjust the position, you can find that the composition above is somewhat different from the imagination. Execute the command of object → precisely cut the border → edit the content, then adjust the position of the group object, and execute the command of object → precisely cut the border → end the editing to get the final effect of the poster outside the color printing shop, as shown in the figure.
How to make fonts with cdr? Is it an artistic font? In CDR, you can use the curve shape tool to do this.
1, select the text tool, type a few words, font and font size to see if you like it.
2. After selecting the text, CTRLQ rotates the text, or right-click and select "Convert to Curve".
3. Press F 10, or click and select "Shape Tool". At this time, there are many dots on the corner of the word. You can drag with the mouse at will. Has the word changed? Okay, that's it. Stretch and adjust to the way you like.
If you want to gradient the effect, pull the gradient;
If you want a 3-D or shadow effect, select the "Interactive Blending Tool" option. This effect: