First, the bar components
1, Qianba
The front bar is mostly a high-low counter, which consists of a dining table for customers and an operating table for wine distribution.
2, after it
It consists of wine cabinets, decorative cabinets and refrigerated cabinets.
Second, three design types of bar.
1, linear bar
This kind of bar can protrude into the room or be recessed into one end of the room. There is no fixed size for the length of a straight bar. It is generally believed that the longest bar that a service person can effectively control is 3 meters. If the bar is too long, the number of service staff will increase.
2, horseshoe bar
This kind of bar can protrude into the room or be recessed into one end of the room. There is no fixed size for the length of a straight bar. It is generally believed that the longest bar that a service person can effectively control is 3 meters. If the bar is too long, the number of service staff will increase.
3. Ring bar
Or a hollow square bar with an "island" in the middle for displaying alcohol and storing articles. The advantage of this bar is that it can fully display alcohol and provide more space for guests, but it makes the service more difficult.
Third, the bar design principles and key points
1, into the space
When setting up a bar indoors, the bar must be regarded as a part of a complete space, and a good design can integrate the bar into the space.
2. Location utilization
The bar should be in a prominent position, such as from the entrance, right opposite the door, etc., while the family bar usually suggests using some abnormal space.
3. Circuit drainage
Of course, the location will also affect the circuit and water supply and drainage design, and the drainage pipe should have a certain inclination angle. It is best to design a separate circuit to avoid tripping.
4. Size and height
The operating space should be at least 90cm, the height of single-layer bar should be about 1 10cm, the height of double-layer bar should be 80cm and 105cm, the gap between them should be at least 25cm, and the depth of table top should be at least 40-60cm.
5, sink design
The water tank is preferably a flat-bottomed tank, so that the cup will not fall or be damaged when placed, and the depth of the water tank is preferably more than 20cm.
6, wine cabinet design
Convenient to use, the height of each floor should be at least 30-40cm, and the part where the wine bottle is placed should be designed to be inclined, and the depth of the cabinet should not be too deep.
7, mesa materials
It is best to use wear-resistant, water-resistant and fire-resistant materials, such as artificial stone, melamine board and stone, which are all ideal materials.
8, bar stool design
The drop between the bar stool surface and the bar table surface should be kept at about 25cm, and the lower end of the stool and the bar should be provided with a support rod for supporting the feet and a backrest.
9. Front Bar Design
Wine bottle rack, three-compartment washing tank or automatic cup washing machine, pool, ornament batching tray, ice storage tank, beer dispenser, beverage dispenser, empty bottle rack and garbage can, etc.
10, back bar design
Cash register, bottle wine storage cabinet, bottle wine, beverage display cabinet, wine, beer refrigerator, beverage, ingredients, fruit ornaments refrigerator, ice maker, wine glass storage cabinet, etc.
1 1, ceiling modeling
There are generally flat, concave-convex, suspended, well-shaped and glass-shaped decoration styles for the ceiling of the bar, and several ways have their own characteristics.
12, lighting tone
The light source is mainly warm, and the bar lighting generally uses point light source instead of scattered light source.
Fourth, how to decorate the family bar?
1, location: living room, dining room, kitchen, balcony, bedroom, the junction of kitchen and living room, in front of French windows, etc.
2. Form: The indoor space layout of family bar has corner type, wall-mounted type, partition type, embedded type and dining table type.
3. Style: The overall style should be consistent with the decoration style and furniture form, and it must not be empty to talk about ostentation and extravagance and pursue luxury, which looks like a colorful public place.
4. Table top: insulating board, ceramic tile, granite, marble, stainless steel, wooden material, epoxy resin material, etc.
5, bar chair: comfortable, in line with the human body curve, height adjustment device, with space size and design style.
6. Layout: The layout should be simple, which can give people a refreshing feeling. A simple board and a chair do not necessarily reduce the romantic mood. A simple chandelier and a candlestick set at will are just as bright.
Five, the bar decoration style
1, modern minimalist style
Simple color, fashionable design, extremely neat and refreshing, elegant and comfortable.
2. American style
The materials make full use of logs, which are retro and nostalgic, and the American countryside has a simple and fresh taste of the countryside.
3. Mediterranean style
Blue and white collocation, refreshing and natural feeling, feel a kind of generous and pure beauty.
4. Pastoral style
Originated from rural nature, it is decorated with green plants and flowers, with a simple leisure atmosphere.
Sixth, the bar decoration Feng Shui
1, shape
The bar should try to avoid the use of missing corners or protruding too obvious shapes. Because the impact of this "horn demon" is very great.
2. Size
Generally speaking, the smallest sink needs to be 60cm long, the operating table needs to be 60cm long, and others can be measured according to their own needs.
3. Decoration
Gold ingots, lucky stones, vases filled with water with flowers, broad-leaved evergreen plants, such as taro and rich bamboo, can also choose decorations according to the orientation of the bar.
4. Tone
Choose the color according to the location, such as the east or the southeast, the five elements belong to wood, and the bar is located in these directions. You need to use a color close to nature, such as green, and you can also place a rich tree.
Seven, the family bar layout classification
1, corner type
Use the corner of the room for layout. Make the indoor space layout more compact and practical.
2, stick to the wall
The bar is placed against the wall, and the bar cabinet can be placed on the bar or hung on the wall. A ceiling is hung above the bar cabinet, and a downlight is embedded in the ceiling, so that the light can be projected on the bar and wine utensils. This method is suitable for small rooms.
3, partition type
It is especially ingenious and reasonable to separate the kitchen from the walkway with a bar to form an open partition. This method is suitable for rooms with large room area and multiple uses.
4, embedded
If there are stairs in the room, you can also use the recessed space under the stairs to set up a bar to make full use of this special space.
5, dining table style
Combine the dining table with the family bar to make the bar double as the dining table. Generally, it can be designed as "T" or "L", and the bar can be divided into upper and lower floors. Because one is multi-purpose and occupies less space, it is especially suitable for small-area rooms without restaurants.