Energy saving and environmental protection doubled honeycomb coal Changed the traditional honeycomb coal production. Recipe and backward combustion methods, in the case of the same amount of raw coal, the production of doubled honeycomb coal than ordinary honeycomb coal doubled the number of costs reduced by half, the profit doubled several times, and combustion time and the effect of longer and better, as follows: 1, low cost, per ton of raw coal to produce twice the number of honeycomb coal (3,200-3,800), the cost is reduced by half (9 cents or so each), the profits of the doubled. Several times. 2, good combustion effect, start the fire fast, only about 5 minutes; fire, high temperature, flame up to 15 centimeters or so; long burning time, non-toxic, tasteless, no black smoke; combustion is complete, high thermal efficiency, less ash, not scattered slag, easy to change the coal. 3, quick-burning coal, a match or lighter can be lit, with the use of point. Convenient and quick. 4, raw materials are easy to buy, production ingredients can be bought in all counties and cities. 5, the production process is simple, no special equipment, mechanical, manual production, 1-2 days to learn. 6, the technology is real and reliable, a full set of production technology only charge information fee 600 yuan (including express postage). We also provide energy-saving and environmentally friendly doubled honeycomb coal, combustible honeycomb coal, "new coal products technology book" (CD-ROM version), honeycomb coal production and molding machine (CD-ROM version). 2415001-High-efficiency flammable honeycomb coal production technology: fire fast 2 minutes flame up to a foot fire fierce 12 minutes to boil a pot of water The briquette is easy to burn, fire fast, with a match from the mouth of the stove that is lit, 2 minutes fire up to a foot, the fire temperature can reach 680 degrees Celsius, and can regulate the size of the fire, easy to use and the same as liquefied petroleum gas, with the use of the point, do not need to close the stove, smokeless, non-toxic, no gas, no smoke, no toxicity, and can not be used to make the fire, and can not be used to make the fire. Seal the stove, smoke-free, non-toxic, tasteless, once put two briquettes can burn 120-150 minutes. Fast results with little investment, with ordinary loose coal plus several kinds of raw materials and two kinds of worthless everywhere mixed with additives, manual operation, with ordinary briquette machine per person per day to process 1200 pieces or so, the cost of each piece of 7 cents, the market selling price of 0.18 yuan or more, such as the construction of a three-person plant, the use of machine production, the annual profit of 500,000 yuan, additives all over the chemical store are sold. One ton of coal can produce 6000 pieces of flammable honeycomb coal. (With VCD disk). 2415002-Environmentally friendly and efficient doubling of coal-saving honeycomb coal: the advantages of this honeycomb coal is that the economy and good, than the traditional honeycomb coal has a fast fire, good combustion effect, fierce fire, long burning time, high fire time than the traditional honeycomb coal longer than 20-30 minutes, each energy-saving honeycomb coal than the traditional honeycomb coal can be more than 6-8 kg of boiled water, the blue fire, can be compared with liquefied petroleum gas, the honeycomb coal in the generation of carbon monoxide and Sulfur dioxide gas is effectively controlled and transformed, so that the discharged gas does not cause air pollution, not easy to break, easy to transport and storage, does not fall off the black slag, not easy to stain the skin and clothes, and the molding of the coal is light in weight, high yield, a ton of coal can be made into 3000-4000 pieces of energy-saving honeycomb coal, is the production of traditional honeycomb coal is about three times the profit of the traditional honeycomb coal is 2.5-3 times the profit of the traditional honeycomb coal. 2415003-Powerful quick-burning honeycomb coal: At present, the ratio of coal and soil in most of the briquette factories around the world is 1,000:300, which can produce 1,200 briquettes of 10 centimeters high, and the cost is very high. The quick-burning coal technology developed by our company has a ratio of 1,000:1,000 for coal and soil, and a dozen or so yuan of combustion additives, which can produce 2,600-3,000 10-centimeter-high briquettes with a burning effect and time exceeding that of the coal without additives. The burning effect and time are more than the briquettes without additives, and the fire is fast, long duration, 18 hours after sealing the furnace is not extinguished, non-toxic, smokeless, odorless, burned waste briquettes slag can also be a whole piece of folder out of the raw materials of combustion agents can be purchased from all over the world. 2415004-straw production of honeycomb coal technology: this product is a combination of straw powder and poor-quality coal as the basic raw materials, and then add desulfurization agent slaked lime, after shaping and then by the paraffin wax and heavy oil formulated into the surface treatment agent for surface treatment and made, is the crop straw can be fully and effectively utilized in the formation of coal. Characteristics: (1) Crop straw and low-quality coal as the basic raw materials, basically are waste utilization, inexpensive and easy to obtain, turning waste into treasure. (2)Good combustibility, less smoke, less sulfur dioxide, comparable to general fuel. (3) Molding without heating, no binder, both energy-saving, but also conducive to reducing costs. (4)The formed coal has water resistance and is convenient for storage and transportation. (5) Good ignitability, easy to use. Usage is the same as ordinary briquettes and honeycomb coal, used as household fuel. 2415005-Electronic quick-ignition energy-saving honeycomb coal: the product has the following advantages: electronic ignition, no need to endure the pain of ignition smoke. It can be burned from top to bottom. Honeycomb coal from the top down burning less smoke, better results with the use of point, like the use of gas, very convenient. The fire can be up to one foot high in two minutes. Blue flame, high temperature. Investment conditions: (calculated on the basis of the daily output of 5000-10000 pieces of coal) 1, site: plant 50-80 square meters or so. 2, personnel: 3-5 people. 3, equipment: a crusher, a number of sets of molds or coal machine, if manual production only molds can be. 4, working capital: 1000-2000 yuan (investment capital turnover period of 5 days). Economic Benefit Analysis: Each ton of raw coal can produce "electronic quick-fire energy-saving honeycomb coal" 5,000-6,000 pieces or so (each piece of honeycomb coal than commonly used less coal consumption, and the volume of the same as the general honeycomb coal). Available coal is not limited, can use bituminous coal, anthracite and poor quality coal, plus other auxiliary raw materials and chemical raw materials (all over the county can be easily purchased) the cost of each piece of general not more than 8 cents, the lowest market price of 0.20 yuan / piece. Such as running a small factory of 10 people (each person daily output of 1,000 pieces) calculations (for reference): 200 yuan per month water and electricity; monthly wages of 300 × 10 = 3,000 yuan; monthly sales revenue: 1,000 × 10 × 30 × 0.2 = 60,000 yuan; the cost of coal: 1,000 × 10 × 30 × 0.08 = 24,000 yuan; monthly profit: 60,000 -24000-3000-200=32800 yuan; annual profit: 32800×12=393600 yuan. 2415006-Vacuum superconducting honeycomb coal preparation method: combustion system dedicated to vacuum superconducting honeycomb coal special products, focusing on solving the problem of thermal efficiency. The key to make this product is to add a combustion aid, this combustion aid preparation components have oxides, salts and other components, the preparation method is to first add the oxides into the water to dissolve, and then add salts, add fully dissolved, with this combustion aid and then added to the coal powder stirred evenly, can be made according to the conventional method of production of this honeycomb coal. Its main advantage is that the thermal efficiency is more than two times higher than that of ordinary honeycomb coal, and the fuel saving is also more than two times, clean and hygienic, pollution-free, and energy-saving. 2415007-Speed combustion honeycomb coal: the upper part of it is ignition coal layer, the lower part is combustion coal layer, the composition of ignition coal layer by weight is coal, soil, sawdust, additives, the composition of combustion coal layer by weight is coal, soil, sawdust and so on. This honeycomb coal after many trials know, it can completely achieve the following advantages: saving energy, ash carbon content of about 1%, easy to ignite, on fire quickly, a match can be lit, and can be in two minutes, the formation of about 10 centimeters in diameter, up to 30 centimeters more than the column of fire, in the same weight under the premise of the combustion time can be extended for about 10 minutes, combustion is full, no pollution and so on. 2415008-Sawdust compression production of honeycomb coal: its main fuel is sawdust, coal slurry and other subsidized materials such as uniform mixing, through the mixer, honeycomb coal molding machine for pressing molding, sawdust honeycomb coal can be made into ordinary type, quick-burning type, a variety of spherical and billet type, etc. for combustion and boiler use. This invention is superior to coal honeycomb coal, energy saving, wood processing residue sawdust is fully utilized, saving coal, the cost is lower than coal honeycomb coal, briquettes, billets of coal, 50 to 60%, combustion effect can be compared with natural gas, combustion peak is higher than coal honeycomb coal. 2415009-Up Ignition Briquette Up Ignition Monolithic Honeycomb Coal: made of bituminous coal, anthracite, coal slurry, coal gangue, clay, lime and coal-type adhesive, which is characterized by the addition of 2-12% of the coal-type adhesive during processing, so that the clay lime will be the outer surface of the damp particles of the coal dust knotted together wrapped in a layer of adhesive film, so that it has a waterproof and moisture-proof, anti-freezing properties and compression resistance, Impact resistance, on the ignition combustion is full, saving fuel, improve thermal efficiency, no smoke when burning, greatly reduce the content of carbon monoxide, sulfur dioxide and 3,4 benzopyrene and other toxic and harmful substances in the flue gas, is an ideal type of coal. 2415010 - Preparation method of sulfur-fixing waterproof honeycomb coal: take smokeless pulverized coal as the main raw material, in order to reduce the cost of fuel with poor quality coal slurry or gangue, sulfur-fixing agent, add a solution consisting of catalysts, combustion aids, auxiliaries, after mixing and homogeneous, molding, to produce the product honeycomb coal. The honeycomb coal is made by using inferior coal to replace part of the fuel coal, saving the cost of raw materials, and the production process is simple and easy to implement, low production costs, honeycomb coal combustion has a quick fire, complete combustion and reduce the SO#-[2] emission characteristics. 2415011-Combustion system dedicated to vacuum superconducting honeycomb coal special products: focus on solving the problem of thermal efficiency. The key to making this product is to add a combustion aid, this combustion aid is formulated with sodium peroxide, dicobalt trioxide, industrial salt, sodium pinacolate and potassium pinacolate composition, the preparation method is to add sodium peroxide into the water to dissolve, and then add dicobalt trioxide, and then industrial salt, potassium pinacolate, sodium pinacolate, in turn, to join the fully dissolved, this combustion aid and then added to the coal powder mixing, can be made in accordance with the conventional production methods. The honeycomb coal can be made according to the conventional production method. Its main advantage is that the thermal efficiency is more than two times higher than that of ordinary honeycomb coal, and the saving of fuel is also more than two times, clean and hygienic, non-polluting, and energy-saving. 2415012-Speed combustion honeycomb coal: its upper part is ignition coal layer, the lower part is combustion coal layer, the composition of ignition coal layer by weight is, coal, soil, sawdust, soap wax, the composition of combustion coal layer by weight is, coal, soil, sawdust. This honeycomb coal by many trials know, it can fully achieve the purpose of the invention, has the following advantages: energy saving, ash carbon content of about 1%, easy to ignite, on fire quickly, a match can be lit, and can be in two minutes, the formation of about 10 centimeters in diameter, up to 30 centimeters more than the column of fire, in the same weight under the premise of the combustion time can be extended for 10 minutes or so, combustion is full, no pollution, and so on. 2415013 - Manufacturing method of industrial gasification coal: At present, the domestic gasification coal processed by various methods generally has the shortcomings of low heat intensity, much drop of fixed carbon, low gas generation, high consumption, etc. The purpose of the present invention is to overcome the shortcomings of industrial gasification coal. The purpose of the present invention is to overcome the above shortcomings and provide a manufacturing method of industrial gasification coal with high temperature resistance, high fixed carbon, high gas generation and low consumption. The task of the present invention is accomplished in the following manner: 1. Firstly, BFA and water are added to a reactor and heated to 90-95°C, lignin, formaldehyde, catalyst, and quantitative caustic soda are added after 30 minutes of reaction with stirring, and zwitterionic agent and so on are added after continuing the reaction for 30-40 minutes, and then the reaction is cooled down and discharged after 20 minutes of further reaction, i.e., it is the binder.2. A certain ratio of 2, a certain proportion of white coal foam, fat coal foam and binder into the mixer to mix well and then pressed into shape. 3, the coal in the chain tunnel drying furnace after 20-30 minutes of rapid drying, that is, the finished product. Compared with the existing technology, the gasification coal produced by the invention can significantly improve the ash solubility point, increase the heat intensity, increase the fixed carbon content, improve the gas generation and reduce coal consumption.