Among them, the jet type beam source has the best silencing effect.

The buffer muffler is more like a heat exchanger or a radiator. It uses a large contact surface to first conduct a small part of the heat energy in the steam to the water to cool down and reduce the pressure of the steam. Injecting very low pressure steam and its condensate into the water in order to achieve the purpose of noise reduction and shock absorption. Its disadvantages include large initial investment, high maintenance costs, short service life, and poor noise reduction effect. Scale and rust need to be removed frequently.

Steam-heated mufflers of the resistant silencing type mostly use small holes to disperse and release steam. It is hoped that on the basis of reducing and dispersing noise sources, the noise and vibration generated by multi-point sound sources can be reduced. cancel and inhibit each other within a certain range. However, this type of muffler is very difficult to manufacture, very easy to fail, and is very sensitive to the effects of water temperature, steam pressure, scaling, etc. Most of these mufflers can only reduce vibration within a certain range.

, 201 stainless steel type, 304 stainless steel type, brass type, etc.

Insert the steam pipe into the water tank (pool) and connect it with a flange.

A single steam heating silencer should be installed in the middle of the water tank. When multiple units are used in parallel, they should be evenly arranged; the bottom of the steam heating silencer is about 200mm away from the bottom of the water tank, and it should be ensured that the water submerges the mixer by more than 100mm. .