Waist circumference calculation method: Waist circumference = height 1/2 minus 19 cm (for example, the standard waist circumference of height 160cm =160 cm/2-19 = 61cm) How to measure it?
Classification by edition type
According to the types: straight, trousers, tapered trousers, bell-bottoms and bias cut trousers.
(1) Straight cylinder:
A: Small straight tube features: the trousers are about 6 inches and 5 inches, basically the same below the crotch, and they fit well.
B: Features of the straight tube: the trouser mouth is about 7 inches, and the trouser legs are slightly fatter than the small straight tube. It can stretch long legs when worn, and the legs are lined with symmetry, slender and straight.
C: Features of large straight tube: the trouser mouth is about 8 inches, the trouser legs are wide, and it is elegant to wear.
(2) Features of trousers: Hip circumference, hip circumference and leg circumference are slightly fatter than small straight tube, and the trousers are roughly the same as straight tube.
(3) The characteristics of tapered trousers: the hip circumference, hip circumference and leg circumference are relatively fat, the trousers mouth is small, and the upper part is wide and the lower part is narrow.
(4) Bell bottoms are divided into big bell bottoms and micro bell bottoms.
(5) oblique cutting:
A. Oblique cut small straight tube features: made into straight pants, wearing long legs.
B. characteristics of oblique cutting in straight tube: make people's legs symmetrical, straight and round.
C. Diagonal flared trousers features: fashion, golden division of human body.
Classification according to suitable occasions
Pant type and shape
1, long and round legs:
Adapt to the pants type: this type of body is perfect, you can wear any style, and the effect is good.
2. Short and thin
Adaptable pants: a. small straight pants B. medium straight tube C. micro-pull D. jeans
Unsuitable pants type: a. wide-leg pants b. flared pants.
3. Short and fat
Adaptable trousers: a. trousers b. tapered trousers c. straight tube.
Unsuitable pants: a. small straight pants b. wide-leg pants c. bias pants d. jeans.
4, thick thighs, hips:
Adaptable trousers: a. trousers B. tapered trousers C. straight tube D. jeans
Unsuitable pants type: A. Small straight pants B. Bell bottoms
5, the calf is thick:
Adaptable pants type: a. Medium pants b. Wide-leg pants c. Nine-point pants.
Unsuitable pants type: A. pants B. small straight tube C. cropped pants D. cropped pants
6. Those with short legs:
Adaptable pants: a. high waist pants B. small straight tube C. oblique cut micro-pull D. tapered pants
Unsuitable pants type: A. Low-waist pants B. Medium-length pants C. Wide-leg pants
7. Older legs:
Adaptable pants type: a. Mid-length pants b. Biased pants c. Wide-leg pants d. Low-waist pants
Unsuitable pants type: A. Nine-point pants B. Seven-point pants C. Eight-point pants D. Small straight tube
How to calculate waist circumference?
First, put the prepared tape measure on your reference pants, measure 15 inch, and multiply it by 2,30 inches to get the waist circumference of these pants. ?
How to measure hip circumference?
Take the sewing line at the lowest part of trousers as the center, measure the distance to both sides, and measure 17 inch, multiplied by 2,34 inches, which is the hip circumference of the trousers. ?
Leg circumference method?
Find the "cross" seam at the bottom of the trousers, and measure it from this point to the most side of the trousers. This is the thickest part of the thigh. Measure 10 inch, multiply by 2, and get that 20 inches is the leg circumference of this pair of pants?
Pant length measurement method?
Measure from the top of the side of the trousers to the bottom of the trousers. ?
The crotch that must be measured is also flat, starting from the place where the "cross" is sewn, and the length obtained is the size of the crotch. ?