The steam mop is actually quite easy to use, when you buy it home, you can follow the instructions on it to install and then use it. When you use it for the first time and find that the steam mop doesn't give out steam, isn't it strange? Below, let's take a look at the steam mop does not come out of steam reasons and solutions.

How to use the steam mop? 1. Fill the water

Loosen the safety cover counterclockwise from the top to the bottom of the tank and add the right amount of water as needed, please don't inject too much clean water, it is better to be within 1.5 liters, then tighten the safety cover clockwise and connect the power plug, the power indicator will be lit, you can wait for 3 to 4 minutes, then press the button again.

2.Using Process

Drag the steam mop back and forth on the floor a few times, especially in heavily stained areas, the steam mop can easily remove the oil on the floor through the steam principle, for some solid waste, you need to clean it up beforehand and then use the steam mop.

3. Put it in a cool place

At the end of cleaning, you can leave the cleaner for some time to keep the body in a completely cool state, and then put it in a cool place for storage. Always use tap water and do not add soap or detergent during use.

Reasons for steam mop not producing steam

1. First of all, we need to find out the reason according to the phenomenon produced by the steam mop. Usually, the biggest reason for no steam is that the water inlet is blocked. This phenomenon is the host will become hot and no steam will not produce gas.

2. The main body of the steam mop makes the sound of boiling water, but does not emit steam. In this case, the pipe may be blocked. Quickly close and clean the vents of the steam pipe and ironing panel.

3. If there is no sound of boiling water and the main body does not get hot, the liner may be damaged or incorrectly wired.

4. If the new machine does not produce steam, contact the merchant directly to return it.

5. If the steam mop has been in use for a long time, it may be broken. Ask the service department to repair it. Usually, there is no steam. There is a heating element inside. This is simple. As long as it can be properly energized, the water in the tank will produce steam.

What are the advantages and disadvantages of the steam mop? Disadvantages:

1, the mop is too heavy, I mopped the first floor of my house has been tired half dead, and then I went to the second floor, the taste is too good, direct exhaustion, as a girl, up and down the stairs to carry too heavy

2, why is there no wireless? Suggest this type of mop, or increase the choice of wireless, I have one hand to take care of the line, one hand also have to hold a heavy mop

3, to be honest, really did not drag much clean, I purely want to buy a steam with the convenience of mopping, this is much cleaner than sweeping, after all, the home is mainly dusty.

Advantages:

1, the box to store the amount of water is still quite large, estimated that a one-time pour full, can drag the square 90-100 or so, but this is to see how fast you mop the floor, mopping slow, the natural evaporation is also large

2, the amount of steam, and the ground is not too much water stains, I said water stains is a little bit of the ground surface water, can not be done like the online marketing as mopping, put a tissue paper, a little wet trace is not there. I can't do it like the online marketing number after mopping, put a paper towel, a little wet traces are not there. But this kind of water damage I can accept, quick dry.