The flooring method refers to a construction method in which wooden or metal keels are set on the ground, and then the floor is laid on top. This method is more commonly used in underground garages, underground shopping malls, factories and other places because it can improve the load-bearing capacity and sound insulation performance of the ground. The following is a detailed introduction to the method of beating the dragon skeleton on the floor.

1. Material preparation

Before construction, various materials need to be prepared, including keels, keel booms, keel inserts, wood screws, electric drills, grinders, and cutting machines. and other tools. The keel is generally made of metal materials such as square steel, angle steel, channel steel, or wood. The boom is generally made of steel wire rope, steel pipe and other materials.

2. Determine the layout direction of the keel

Before construction, it is necessary to determine the layout direction of the keel. In general, the direction can be determined based on the ground elevation. If the ground elevation is relatively high, a horizontal arrangement is required; if the ground elevation is relatively low, a longitudinal arrangement is required. After determining the direction, you need to use chalk to mark the location of the keel arrangement on the ground.

3. Install the keel

After arranging the keel position, you need to use an electric drill and wood screws to fix the keel to the ground. When fixing, the keel needs to be adjusted horizontally to ensure that it is flush with the ground. When fixing, you need to follow the pre-marked position, and you also need to pay attention to the spacing between keels. Under normal circumstances, the spacing should be controlled between 600mm-800mm.

4. Install the boom

While installing the keel, you need to install the keel boom. The function of the boom is to adjust the height of the keel to keep it flush with the ground. The boom can use steel wire rope or steel pipe, which needs to be selected according to the size of the keel boom hole. The number and position of the booms need to be set according to the actual situation. Generally, they are set according to the spacing of the keels.

5. Installation of embedded parts

After fixing the keel and boom, the embedded parts need to be installed. Inserts are used to secure flooring, tiles and other materials. The installation of the insert requires the use of a cutting machine and a grinder, and it needs to be embedded into the keel to ensure firm fixation. The number and position of the inserts need to be set according to the actual situation. Generally, they are set according to the size and shape of the floor.

6. Laying the floor

After installing the keels and inserts, the floor can be laid. The floor can use wood flooring, stone flooring, ceramic tiles and other materials. When laying, the floor needs to be placed on the inserts, and then the floor and inserts are fixed together, which can be fixed with glue or screws. When laying, you need to pay attention to the gap between the floors. Generally, the gap should be controlled between 2mm-5mm.

7. Completion of acceptance

After completing the laying of the floor, acceptance needs to be carried out. During acceptance, it is necessary to check the flatness, size, gaps, fixation fastness, etc. of the floor to ensure that it meets the construction requirements. If there is a problem, it needs to be refinished until it meets the requirements.

Summary: Flooring with dragon frames is a relatively common construction method. Various materials and tools need to be prepared and constructed in a certain order. During the construction process, attention needs to be paid to the details of each link to ensure construction quality.