Installation instructions:
1. If the new computer or computer system is damaged, you need to use another available computer to make a Chinese cabbage USB flash drive.
2. If the memory is 3G or lower, choose a 32-bit x86 system; if the memory is 4G or higher, choose a 64-bit x64 system.
Related reading:
Chinese cabbage installation original win7 tutorial
The method of pe backing up the desktop data of disk C when the system crashes.
First, the installation preparation work
1, system download: USB flash drive version of win7 system download address.
2.4G and above USB flash drive: How to make Chinese cabbage USB flash drive?
Second, U disk startup settings: how to set up startup from U disk (different computer startup hotkeys and BIOS settings);
3. the steps of installing win7 system on cabbage u disk are as follows
1. Make a U disk of Chinese cabbage according to the above tutorial, and then copy the downloaded win7 system iso file directly to the GHO directory of the U disk;
2. Insert the U disk of Chinese cabbage into the computer that needs win7 system. After restarting, continue to press F 12, F 1 1, Esc and other shortcut keys. Open the startup menu, select the U disk option to enter, such as GeneralUDisk5.00. For computers that do not support these startup keys, check the startup mode of the U disk at the second point.
3. Start from the USB flash drive to enter the menu, and select the 02 option through the direction key to enter, or directly press the number key 2 to start the pe system. If you can't get in, choose 03 old PE system;
4. After entering the pe system, if you need to re-partition, you need to back up all the data, then double-click to open the DG partition tool, right-click the hard disk, and select Quick Partition;
5. Set the number and size of partitions. It is generally recommended that the C disk is above 35G. If it is a solid-state hard disk, check "Align Partition" to align to 4k, and click OK to execute the hard disk partition process.
6. After the hard disk is partitioned, open the one-button loader of Pakchoi and select the iso image of win7 system as the image path. At this time, the gho file will be automatically extracted, and click the drop-down box to select the gho file;
7. Then click "Restore Partition" and select the installation location of win7 system, which is usually disk C. If disk C is not displayed, you can select it according to "Volume Label" and disk size, and click OK;
8. At this time, a prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to start system restoration;
9. Enter this interface and perform the operation of restoring win7 system to drive C. This process will take about 5 minutes, please wait patiently.
10, when the progress bar reaches 100%, the computer will automatically restart. At this time, the USB flash drive will be pulled out (otherwise some computers will continue to enter Chinese cabbage), and then it will automatically restart into this interface to continue the process of installing win7 system and system configuration;
1 1. Restart to enter the new win7 system desktop for the last time, and the process of installing win7 system on Chinese cabbage is completed. Win7 system installed in this way has been automatically activated and does not need to be activated again.
This is a tutorial on how to install win7 system in Chinese cabbage. Friends who don't know how to install win7 system with cabbage u disk can refer to the above method for installation.